'KuKu Mi'

'KuKu Mi' project consists of DTH and SmartApp and API server.

It makes SmartThings supports Xiaomi products.

Mi Remote

Xiaomi BT Temperature / Humidity Sensor

'KuKu Mi' Architecutre

0. Preparing

To use 'KuKu Mi', need below environments.

- Common

'Docker' system tool
NAS or Micro or Mini Server

- Mi Remote

Registered 'Mi Remote' device at 'MiHome' application

- Xiaomi BT Temperature / Humidity Sensor

BT dongle for Xiaomi BT Temperature / Humidity Sensor (if there is no WiFi/BT module in system)
Aduino(ESP32s) to exetend BT coverage Arduino Installation

1. Install 'KuKu Mi' Server

1-1) 'KuKu Mi' Docker Image download

[X86 Platform]
# docker pull turlvo/kukumi

or

[ARM Platform]
# docker pull turlvo/kukumi-rasp

1-2) Execute 'KuKu Mi' API server by running container

[X86 Platform]
# docker run --name=KuKuMi --privileged --net=host turlvo/kukumi

or

[ARM Platform] (Xiaomi BT version is not released)
# docker run --name=KuKuMi  --privileged --net=host turlvo/kukumi-rasp

1-3) Enable auto run 'KuKu Mi' container when rebooted (Optional)

# sudo vim /etc/systemd/system/kukumi.service

<kukumi.service File content>

[Unit]
Description=KuKuMi container
Requires=docker.service
After=docker.service

[Service]
Restart=always
ExecStart=/usr/bin/docker start -a KuKuMi
ExecStop=/usr/bin/docker stop -t 2 KuKuMi

[Install]
WantedBy=multi-user.target

# sudo systemctl enable /etc/systemd/system/kukumi.service

2. Setting of 'Mi Remote' at 'KuKu Mi Web server'

2-1) Connect to 'http://[KuKu Mi api Server's IP]:8484/' using Web browser

2-2) Add a 'Mi Remote' device (Discover or Manual)

2-3) Add a commands by learning or add a commands by manually

2-4) Added devices and commands screenshot

3. Installation of 'KuKu Mi' DTH and SmartApp at ST IDE

3-1) Add 'KuKu Mi' DTH in ST IDE

3-2) Add a 'KuKu Mi' SmartApp in ST IDE

https://github.com/turlvo/KuKuMi

GitHub Repository Integration
- Owner : turlvo
- Name : KuKuMi
- Branch : master

4. Installation of 'KuKu Mi' SmartApp at SmartThings Application

4-1) Install 'KuKu Mi' SmartApp

'Add a SmartApp' -> 'My SmartApp' -> select a 'KuKu Mi'

Input server's IP (KuKuMi-api server is running) ex) 192.168.1.137:8484
Select 'Save' to complete installation

4-2) Add a device at 'KuKu Mi' SmartApp

'Automation' -> 'SmartApps' -> 'KuKu Mi'
'Add a device...'
Enter 'Xiaomi Device Type'

Select 'Mi Remote'
Enter 'Xiaomi Device'
Select your Mi Remote device (added in KuKu Mi Web Server)

Enter 'device name' that you want
Enter 'DTH Type' and select DTH that you want to install

Select to 'Next' to set up command
Mapping your command to button (added in KuKu Mi Web Server)

If you want synchronize device state by Plug and Contact Sensor, configure 'State Monitor' menu
To complete adding device, 'select 'Save' button
You can confirm added device

4-3) Installed Device Screenshot(Custom DTH)