Created to test the HAGL graphics library. For quick reference see the recording on Vimeo. If you cannot compile yourself build directory contains a recent firmware for Pimoroni display pack.
Below instructions assume you do not have Raspberry Pi Pico SDK installed yet.
$ git clone --recursive https://github.com/raspberrypi/pico-sdk.git
$ git clone --recursive https://github.com/tuupola/pico_effects.git
$ cd pico_effects/build
$ cmake ..
$ make -j8
If the SDK is already installed you can pass the installation path manually.
$ git clone --recursive https://github.com/tuupola/pico_effects.git
$ cd pico_effects/build
$ cmake .. -DPICO_SDK_PATH=../pico-sdk
$ make -j8
You can then "flash" the firmware by putting the Pico into BOOTSEL mode and copying the uf2 file to the automatically mounted volume.
$ cp firmware.uf2 /run/media/<username>/RPI-RP2/
If you are using macOS the command would be the following.
$ cp firmware.uf2 /Volumes/RPI-RP2
Alternatively you can use picotool to flash the firmware.
$ picotool load firmware.uf2 -f
HAGL is hardware agnostic. You can run the demos also on your computer.
MIT No Attribution (MIT-0). Please see LICENSE for more information.