FTL: A C repository from twelfd

Pi-hole FTL

This project is copyright under the latest version of the EUPL.

Please see LICENSE file for your rights under this license.

Compatibility list

Board	Tested OS	CPU architecture	Suitable binaries	Tested by
VirtualBox	Ubuntu 16.10	amd64	`linux-x86_64`	@DL6ER
Raspberry Pi Zero	Raspbian Jessie	armv6l	`arm-linux-gnueabi`	@DanSchaper
Raspberry Pi 1	Raspbian Jessie	armv6	`arm-linux-gnueabi`	@DL6ER
Raspberry Pi 2	Raspbian Jessie	armv7l	`arm-linux-gnueabihf` and `arm-linux-gnuabi`	@TechnicalPyro
Raspberry Pi 3	Raspbian Jessie	armv7l	`arm-linux-gnuabi` and `arm-linux-gnueabihf`	@DL6ER
Raspberry Pi 3	openSUSE	aarch64	`aarch64-linux-gnu`	@DL6ER
NanoPi NEO	armbian Ubuntu 16.04	armv7l	`arm-linux-gnueabihf`	@DL6ER
Odroid-C2	Ubuntu 16.04	aarch64	`aarch64-linux-gnu`	@DanSchaper
C.H.I.P	Debian	armv7l	`arm-linux-gnueabihf`	@Promofaux
OrangePi Zero	armbian Ubuntu 16.04	armv7l	`arm-linux-gnueabihf`	@DL6ER
BeagleBone Black	Debian Jessie	armv7l	`arm-linux-gnueabihf`	@frosty5689

If your device is not listed you can get your CPU architecture by running lscpu. Download some binaries and try which one work. If you want to add a new device, open an issue or create a PR for the README.

How to test FTL?

FTL is now part of the Pi-hole development branches. If you want to test it, use pihole checkout dev

How to compile FTL from source?

Clone the repo
make
sudo make install
sudo service pihole-FTL start

Debugging `pihole-FTL`

Debugging instructions (when `FTL` is not starting reliably)

Once you are used to it, you can skip most of the steps and debugging is actually quite easy and gives you insights into how software (not limited to pihole-FTL) works.

Install screen and gdb (probably sudo apt-get install screen gdb)
Start a screen session (it will allow you to come back even if the SSH connection died)

If you don't know about screen, then read about it (you will love it!)

Start a screen session using screen
Ensure that pihole-FTL is terminated (e.g. sudo killall pihole-FTL)
Arrange file permissions to be able to start FTL as your current user (the following assumes you are logged in as user pi).

sudo touch /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port
sudo chown pi:pi /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port
sudo chmod 0644 /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port

Start pihole-FTL in the debugger: gdb pihole-FTL
Type handle SIGHUP nostop SIGPIPE nostop to instruct the debugger to don't stop on expected signals
Type run debug to start FTL (you should see some lines of text and FTL should start successfully)
You can now close the terminal (Ctrl+A and then D to detach) and come back later using (screen -r) when it has crashed
If it has crashed, copy&paste the terminal output, and
type also backtrace and post the output in a (new) issue
We might ask for additional information in order to isolate your particular issue

Simplified debugging instructions (when `FTL` is running)

FTL has been designed such that a debugger can be attached to an already running process to ease debugging. Use sudo gdb -p $(pidof pihole-FTL) to attach to an already running pihole-FTL process. You can leave off sudo if you are running pihole-FTL with the current user. Once loading of the symbols has finished (the (gdb) input prompt is shown), run handle SIGHUP nostop SIGPIPE nostop followed by continue to continue operation of pihole-FTL inside the debugger. All debugger features are now available.

If pihole-FTL has crashed, copy&paste the terminal output into a (new) issue. Also type backtrace and include its output. We might ask for additional information in order to isolate your particular issue.

When you want to detach the debugger from FTL without terminating the process, you can hit Ctrl+C and enter detach followed by quit.

Command line arguments

debug - Don't go into daemon mode (stay in foreground) + more verbose logging
test - Start FTL and process everything, but shut down immediately afterwards
version - Don't start FTL, show only version
tag - Don't start FTL, show only git tag
branch - Don't start FTL, show only git branch FTL was compiled from
no-daemon or -f - Don't go into background (daemon mode)
help or -h - Don't start FTL, show help

Command line arguments can be arbitrarily combined, e.g. pihole-FTL debug test

File locations

/var/log/pihole-FTL.log log file
/var/run/pihole-FTL.pid PID file
/var/run/pihole-FTL.port file containing port on which FTL is listening

Socket connections

connect via e.g. telnet 127.0.0.1 4711 port may be automatically incremented if 4711 isn't available

FTL's config file

You can create a file /etc/pihole/pihole-FTL.conf that will be read by FTL on startup.

Possible settings (the option shown first is the default):

SOCKET_LISTENING=localonly|all (Listen only for local socket connections or permit all connections)
TIMEFRAME=rolling24h|yesterday|today (Rolling data window, up to 48h (today + yesterday), or up to 24h (only today, as in Pi-hole v2.x ))
QUERY_DISPLAY=yes|no (Display all queries? Set to no to hide query display)
AAAA_QUERY_ANALYSIS=yes|no (Allow FTL to analyze AAAA queries from pihole.log?)
MAXDBDAYS=365 (How long should queries be stored in the database? Setting this to 0 disables the database altogether)
RESOLVE_IPV6=yes|no (Should FTL try to resolve IPv6 addresses to host names?)
RESOLVE_IPV4=yes|no (Should FTL try to resolve IPv4 addresses to host names?)
DBINTERVAL=1.0 (How often do we store queries in FTL's database [minutes]?)
DBFILE=/etc/pihole/pihole-FTL.db (Specify path and filename of FTL's SQLite long-term database. Setting this to DBFILE= disables the database altogether)

Implemented keywords (starting with `>`, subject to change):

>quit: Closes connection to client
>kill: Terminates FTL
>stats : Get current statistics

domains_being_blocked 19977
dns_queries_today 104749
ads_blocked_today 279
ads_percentage_today 1.396606
unique_domains 6
queries_forwarded 3
queries_cached 2
clients_ever_seen 3
unique_clients 3

>overTime : over time data (10 min intervals)

>top-domains : get top domains

0 8462 x.y.z.de
1 236 safebrowsing-cache.google.com
2 116 pi.hole
3 109 z.y.x.de
4 93 safebrowsing.google.com
5 96 plus.google.com
[...]

Variant: >top-domains (15) to show (up to) 15 entries

>top-ads : get top ad domains

0 8 googleads.g.doubleclick.net
1 6 www.googleadservices.com
2 1 cdn.mxpnl.com
3 1 collector.githubapp.com
4 1 www.googletagmanager.com
5 1 s.zkcdn.net
[...]

Variant: >top-ads (14) to show (up to) 14 entries

top-clients : get recently active top clients (IP addresses + host names (if available))

0 9373 192.168.2.1 router
1 484 192.168.2.2 work-machine
2 8 127.0.0.1 localhost

Variant: >top-clients (9) to show (up to) 9 client entries

Variant: >top-clients withzero (15) to show (up to) 15 clients even if they have not been active recently (see PR #124 for further details)

>forward-dest : get forward destinations (IP addresses + host names (if available)) along with the percentage

0 80.0 ::1 local
1 10.0 1.2.3.4 some.dns.de
2 10.0 5.6.7.8 some.other.dns.com

Variant: >forward-dest unsorted to show forward destinations in unsorted order (equivalent to using >forward-names)

>querytypes : get collected query types percentage

A (IPv4): 60.5
AAAA (IPv6): 39.5

>getallqueries : get all queries that FTL has in its database

1483964292 IPv4 apis.google.com 1.2.3.4 3
1483964293 IPv4 clients5.google.com 1.2.3.4 2
1483964294 IPv4 lh3.googleusercontent.com 1.2.3.4 2
1483964295 IPv4 ogs.google.com 1.2.3.4 2
1483964297 IPv4 plus.google.com 1.2.3.4 2
1483964299 IPv4 www.google.com 2.3.4.5 2
1483964302 IPv4 www.googleadservices.com 2.3.4.5 1
1483964312 IPv4 www.gstatic.com 2.3.4.5 2
1483964333 IPv4 www.linguee.de 2.3.4.5 2

Variant: >getallqueries (37) show (up to) 37 latest entries

>getallqueries-time 1483964295 1483964312 : get all queries that FTL has in its database in a limited time interval

1483964295 IPv4 ogs.google.com 1.2.3.4 2
1483964297 IPv4 plus.google.com 1.2.3.4 2
1483964299 IPv4 www.google.com 2.3.4.5 2
1483964302 IPv4 www.googleadservices.com 2.3.4.5 1
1483964312 IPv4 www.gstatic.com 2.3.4.5 2

Variant: >getallqueries-time 1483964295 1483964312 (17) show matches in the (up to) 17 latest entries. Note that this does not necessarily mean that 15 entries will be returned

>getallqueries-domain www.google.com : get all queries that FTL has in its database for a specific domain name

1483964299 IPv4 www.google.com 2.3.4.5 2

Variant: >getallqueries-domain www.google.com (15) (see notes above)

>getallqueries-client 2.3.4.5 : get all queries that FTL has in its database for a specific client name or IP

1483964299 IPv4 www.google.com 2.3.4.5 2
1483964302 IPv4 www.googleadservices.com 2.3.4.5 1
1483964312 IPv4 www.gstatic.com 2.3.4.5 2
1483964333 IPv4 www.linguee.de 2.3.4.5 2

Variant: >getallqueries-client 2.3.4.5 (12) (see notes above)

>recentBlocked : get most recently pi-holed domain name

www.googleadservices.com

Variant: >recentBlocked (4) show the four most recent vlocked domains

>memory : get information about FTL's memory usage due to its internal data structure

memory allocated for internal data structure: 178688 bytes (178.69 KB)
dynamically allocated allocated memory used for strings: 15084 bytes (15.08 KB)
Sum: 193772 bytes (193.77 KB)

>clientID : Get ID of currently connected client

>version : Get version information of the currently running FTL instance

version v1.6-3-g106498d-dirty
tag v1.6
branch master
date 2017-03-26 13:10:43 +0200

>dbstats : Get some statistics about the FTL long-term storage database

queries in database: 88387
SQLite version: 3.19.3

twelfd/FTL