Twinklr Main Board
This repository contains layouts for the Twinklr main PCB in EAGLE's brd and sch formats. Gerber files are also included.
twinklr_board
This was the original Twinklr board with a built-in 1W amplifier. Unfortunately, it doesn't really work very well, so the amplifier was removed from the final version.
twinklr_board_5v
This is the board used in the current version of Twinklr. It distributes 5V from a tip-negative PSU to the Raspberry Pi, rather than stepping down 9V with a regulator. It has no amplifier.
License
Twinklr is Open Hardware.
Twinklr by
Tom Armitage and Richard Birkin is Open
Hardware. It is licensed under a Creative Commons
Attribution-ShareAlike 4.0 International License
If you use any work in this project, you should credit us, and you must
republish any changes you make under the same license. This license does permit
commercial use of these designs, but consider getting in touch before selling
anything.
