Why this project?

The python script supervisord is a powerful tool used by a lot of guys to manage the processes. I like the tool supervisord also.

But this tool requires us to install the big python environment. In some situation, for example in the docker environment, the python is too big for us.

In this project, the supervisord is re-implemented in go-lang. The compiled supervisord is very suitable for these environment that the python is not installed.

Compile the supervisord

Before compiling the supervisord, make sure the go-lang is installed in your environement.

To compile the go-lang version supervisord, run following commands (required go 1.11+):

local: go build
linux: env GOOS=linux GOARCH=amd64 go build -o supervisord_linux_amd64

Run the supervisord

After the supervisord binary is generated, create a supervisord configuration file and start the supervisord like below:

$ cat supervisor.conf
[program:test]
command = /your/program args
$ supervisord -c supervisor.conf

Run as daemon

Add the inet interface in your configuration:

[inet_http_server]
port=127.0.0.1:9001

then run

$ supervisord -c supervisor.conf -d

In order to controll the daemon, you can use $ supervisord ctl subcommand, available commands are: status, start, stop, shutdown, reload.

$ supervisord ctl status
$ supervisord ctl status program-1 program-2...
$ supervisord ctl status group:*
$ supervisord ctl stop program-1 program-2...
$ supervisord ctl stop group:*
$ supervisord ctl stop all
$ supervisord ctl start program-1 program-2...
$ supervisord ctl start group:*
$ supervisord ctl start all
$ supervisord ctl shutdown
$ supervisord ctl reload
$ supervisord ctl signal <signal_name> <process_name> <process_name> ...
$ supervisord ctl signal all
$ supervisord ctl pid <process_name>
$ supervisord ctl fg <process_name>

the URL of supervisord in the "supervisor ctl" subcommand is dected in following order:

check if option -s or --serverurl is present, use this url
check if -c option is present and the "serverurl" in "supervisorctl" section is present, use the "serverurl" in section "supervisorctl"
return http://localhost:9001

Check the version

command "version" will show the current supervisor version.

$ supervisord version

Supported features

http server

the unix socket & TCP http server is supported. Basic auth is supported.

The unix socket setting is in the "unix_http_server" section. The TCP http server setting is in "inet_http_server" section.

If both "inet_http_server" and "unix_http_server" is not configured in the configuration file, no http server will be started.

supervisord information

Following parameters are supported in "supervisord" section:

logfile
logfile_maxbytes
logfile_backups
loglevel
pidfile
minfds
minprocs
identifier

program

the following features is supported in the "program:x" section:

program command
process name
numprocs
numprocs_start
autostart
startsecs
startretries
autorestart
exitcodes
stopsignal
stopwaitsecs
stdout_logfile
stdout_logfile_maxbytes
stdout_logfile_backups
redirect_stderr
stderr_logfile
stderr_logfile_maxbytes
stderr_logfile_backups
environment
priority
user
directory
stopasgroup
killasgroup
restartpause

program extends

Following new keys are supported by the [program:xxx] section:

depends_on: define program depends information. If program A depends on program B, C, the program B, C will be started before program A. Example:

[program:A]
depends_on = B, C

[program:B]
...
[program:C]
...

user: user in the section "program:xxx" now is extended to support group with format "user[:group]". So "user" can be configured as:

[program:xxx]
user = user_name
...

[program:xxx]
user = user_name:group_name
...

stopsignal list one or more stop signal can be configured. If more than one stopsignal is configured, when stoping the program, the supervisor will send the signals to the program one by one with interval "stopwaitsecs". If the program does not exit after all the signals sent to the program, the supervisor will kill the program
restart_when_binary_changed: a bool flag to control if the program should be restarted when the executable binary is changed
restart_directory_monitor: a path to be monitored for restarting purpose
restart_file_pattern: if a file is changed under restart_directory_monitor and the filename matches this pattern, the program will be restarted.

Set default parameters for program

A section "program-default" is added and the default parameters for programs can be set in this section. This can reduce some parameters for programs. For example both test1 and test2 program have exactly same environment variables VAR1 and VAR2, the environment variable is decalred like:

[program:test1]
...
environment=VAR1="value1",VAR2="value2"

[program:test2]
...
environment=VAR1="value1",VAR2="value2"

the VAR1 and VAR2 environment variable can be moved to "program-default" section like:

[program-default]
environment=VAR1="value1",VAR2="value2"

[program:test1]
...

[program:test2]
...

Group

the "group" section is supported and you can set "programs" item

Events

the supervisor 3.x defined events are supported partially. Now it supports following events:

all process state related events
process communication event
remote communication event
tick related events
process log related events

Logs

The logs ( field stdout_logfile, stderr_logfile ) from programs managed by the supervisord can be written to:

- /dev/null, ignore the log
- /dev/stdout, write log to stdout
- /dev/stderr, write log to stderr
- syslog, write the log to local syslog
- syslog @[protocol:]host[:port], write the log to remote syslog. protocol must be "tcp" or "udp", if missing, "udp" will be used. If port is missing, for "udp" protocol, it's value is 514 and for "tcp" protocol, it's value is 6514.
- file name, write log to a file

Mutiple log file can be configured for the stdout_logfile and stderr_logfile with delimeter ',', for example if want to a program write log to both stdout and test.log file, the stdout_logfile for the program can be configured as:

stdout_logfile = test.log, /dev/stdout

Web GUI

This supervisord has a default web GUI, you can start, stop & check the status of program from the GUI. Following picture shows the default web GUI:

Usage from a Docker container

supervisord is compiled inside a Docker image to be used directly inside another image, from the Docker Hub version.

FROM debian:latest
COPY --from=ochinchina/supervisord:latest /usr/local/bin/supervisord /usr/local/bin/supervisord
CMD ["/usr/local/bin/supervisord"]

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

twosimple/supervisord