/vis

a vim like text editor

Primary LanguageCOtherNOASSERTION

Vis a vim-like text editor

Linux Build Status Cygwin Build Status Coverity Scan Build Status codecov #vis-editor on freenode

Vis aims to be a modern, legacy free, simple yet efficient vim-like editor.

It extends vim's modal editing with built-in support for multiple cursors/selections and combines it with sam's structural regular expression based command language.

As an universal editor it has decent Unicode support (including double width and combining characters) and should cope with arbitrary files including:

  • large (up to a few Gigabytes) ones including
    • Wikipedia/OpenStreetMap XML / SQL / CSV dumps
    • amalgamated source trees (e.g. SQLite)
  • single line ones e.g. minified JavaScript
  • binary ones e.g. ELF files

Efficient syntax highlighting is provided using Parsing Expression Grammars which can be conveniently expressed using Lua in form of LPeg.

The editor core is written in a reasonable amount of clean (your mileage may vary), modern and legacy free C code enabling it to run in resource constrained environments. The implementation should be easy to hack on and encourage experimentation (e.g. native built in support for multiple cursors). There also exists a Lua API for in process extensions.

Vis strives to be simple and focuses on its core task: efficient text management. As an example the file open dialog is provided by an independent utility. There exist plans to use a client/server architecture, delegating window management to your windowing system or favorite terminal multiplexer.

The intention is not to be bug for bug compatible with vim, instead a similar editing experience should be provided. The goal could thus be summarized as "80% of vim's features implemented in roughly 1% of the code".

vis demo

Getting started / Build instructions

In order to build vis you will need a C99 compiler, a POSIX.1-2008 compatible environment as well as:

  • libcurses, preferably in the wide-character version
  • libtermkey
  • lua >= 5.2 (optional)
  • LPeg >= 0.12 (optional runtime dependency required for syntax highlighting)

Assuming these dependencies are met, execute:

$ ./configure && make && sudo make install

By default the configure script will try to auto detect support for Lua. See configure --help for a list of supported options. You can also manually tweak the generated config.mk file.

On Linux based systems make standalone will attempt to download, compile and install all of the above dependencies into a subfolder inorder to build a self contained statically linked binary.

make local will do the same but only for libtermkey, Lua and LPeg (i.e. the system C and curses libraries are used).

Or simply use one of the distribution provided packages:

Editing Features

The following section gives a quick overview over the currently supported features.

Operators

c   (change)
d   (delete)
!   (filter)
=   (indent, currently an alias for gq)
gq  (format using fmt(1))
gu  (make lowercase)
gU  (make uppercase)
J   (join)
p   (put)
<   (shift-left)
>   (shift-right)
~   (swap case)
y   (yank)

Operators can be forced to work line wise by specifying V.

Movements

0        (start of line)
b        (previous start of a word)
B        (previous start of a WORD)
$        (end of line)
e        (next end of a word)
E        (next end of a WORD)
F{char}  (to next occurrence of char to the left)
f{char}  (to next occurrence of char to the right)
^        (first non-blank of line)
g0       (begin of display line)
g$       (end of display line)
ge       (previous end of a word)
gE       (previous end of a WORD)
gg       (begin of file)
G        (goto line or end of file)
gj       (display line down)
gk       (display line up)
g_       (last non-blank of line)
gm       (middle of display line)
|        (goto column)
h        (char left)
H        (goto top/home line of window)
j        (line down)
k        (line up)
l        (char right)
L        (goto bottom/last line of window)
`{mark}  (go to mark)
'{mark}  (go to start of line containing mark)
%        (match bracket)
M        (goto middle line of window)
]]       (next end of C-like function)
}        (next paragraph)
)        (next sentence)
][       (next start of C-like function)
N        (repeat last search backwards)
n        (repeat last search forward)
[]       (previous end of C-like function)
[{       (previous start of block)
]}       (next start of block)
[(       (previous start of parenthese pair)
])       (next start of parenthese pair)
{        (previous paragraph)
(        (previous sentence)
[[       (previous start of C-like function)
;        (repeat last to/till movement)
,        (repeat last to/till movement but in opposite direction)
#        (search word under cursor backwards)
*        (search word under cursor forwards)
T{char}  (till before next occurrence of char to the left)
t{char}  (till before next occurrence of char to the right)
?{text}  (to next match of text in backward direction)
/{text}  (to next match of text in forward direction)
w        (next start of a word)
W        (next start of a WORD)

An empty line is currently neither a word nor a WORD.

Some of these commands do not work as in vim when prefixed with a digit i.e. a multiplier. As an example in vim 3$ moves to the end of the 3rd line down. However vis treats it as a move to the end of current line which is repeated 3 times where the last two have no effect.

Text objects

All of the following text objects are implemented in an inner variant (prefixed with i) and a normal variant (prefixed with a):

w  word
W  WORD
s  sentence
p  paragraph
[,], (,), {,}, <,>, ", ', `         block enclosed by these symbols

For sentence and paragraph there is no difference between the inner and normal variants.

gn      matches the last used search term in forward direction
gN      matches the last used search term in backward direction

Additionally the following text objects, which are not part of stock vim are also supported:

ae      entire file content
ie      entire file content except for leading and trailing empty lines
af      C-like function definition including immediately preceding comments
if      C-like function definition only function body
al      current line
il      current line without leading and trailing white spaces

Modes

Vis implements more or less functional normal, operator-pending, insert, replace and visual (in both line and character wise variants) modes.

Visual block mode is not implemented and there exists no immediate plan to do so. Instead vis has built in support for multiple cursors.

Command mode is implemented as a regular file. Use the full power of the editor to edit your commands / search terms.

Ex mode is deliberately not implemented, instead a variant of the structural regular expression based command language of sam(1) is supported.

Multiple Cursors / Selections

vis supports multiple cursors with immediate visual feedback (unlike in the visual block mode of vim where for example inserts only become visible upon exit). There always exists one primary cursor located within the current view port. Additional cursors ones can be created as needed. If more than one cursor exists, the primary one is styled differently (yellow by default).

To manipulate multiple cursors use in normal mode:

Ctrl-K       create count new cursors on the lines above
Ctrl-Meta-K  create count new cursors on the lines above the first cursor
Ctrl-J       create count new cursors on the lines below
Ctrl-Meta-J  create count new cursors on the lines below the last cursor
Ctrl-P       remove primary cursor
Ctrl-N       select word the cursor is currently over, switch to visual mode
Ctrl-U       make the count previous cursor primary
Ctrl-D       make the count next cursor primary
Ctrl-C       remove the count cursor column
Ctrl-L       remove all but the count cursor column
Tab          try to align all cursor on the same column
Esc          dispose all but the primary cursor

Visual mode was enhanced to recognize:

I            create a cursor at the start of every selected line
A            create a cursor at the end of every selected line
Tab          left align selections by inserting spaces
Shift-Tab    right align selections by inserting spaces
Ctrl-N       create new cursor and select next word matching current selection
Ctrl-X       clear (skip) current selection, but select next matching word
Ctrl-P       remove primary cursor
Ctrl-U/K     make the count previous cursor primary
Ctrl-D/J     make the count next cursor primary
Ctrl-C       remove the count cursor column
Ctrl-L       remove all but the count cursor column
+            rotates selections rightwards count times
-            rotates selections leftwards count times
\            trim selections, remove leading and trailing white space
Esc          clear all selections, switch to normal mode

In insert/replace mode

Shift-Tab    align all cursors by inserting spaces

Marks

[a-z] general purpose marks
<     start of the last selected visual area in current buffer
>     end of the last selected visual area in current buffer

No marks across files are supported. Marks are not preserved over editing sessions.

Registers

Supported registers include:

"a-"z   general purpose registers
"A-"Z   append to corresponding general purpose register
"*, "+  system clipboard integration via shell script vis-clipboard
"0      yank register
"/      search register
":      command register
"_      black hole (/dev/null) register

If no explicit register is specified a default register is used.

Undo/Redo and Repeat

The text is currently snapshotted whenever an operator is completed as well as when insert or replace mode is left. Additionally a snapshot is also taken if in insert or replace mode a certain idle time elapses.

Another idea is to snapshot based on the distance between two consecutive editing operations (as they are likely unrelated and thus should be individually reversible).

Besides the regular undo functionality, the key bindings g+ and g- traverse the history in chronological order. Further more the :earlier and :later commands provide means to restore the text to an arbitrary state.

The repeat command . works for all operators and is able to repeat the last insertion or replacement.

Macros

The general purpose registers [a-z] can be used to record macros. Use one of [A-Z] to append to an existing macro. q starts a recording, @ plays it back. @@ refers to the least recently recorded macro. @: repeats the last :-command. @/ is equivalent to n in normal mode.

Structural Regular Expression based Command Language

Vis supports sam's structural regular expression based command language.

The basic command syntax supported is mostly compatible with the description found in the sam manual page. The sam reference card might also be useful.

Sam commands can be entered from the vis prompt as :<cmd>

A command behaves differently depending on the mode in which it is issued:

  • in visual mode it behaves as if an implicit extract x command matching the current selection(s) would be preceding it. That is the command is executed once for each selection.

  • in normal mode:

    • if an address for the command was provided it is evaluated starting from the current cursor position(s) i.e. dot is set to the current cursor position.

    • if no address was supplied to the command then:

      • w and wq command are always applied to the whole file

      • if multiple cursors exist, the command is executed once for every cursor with dot set to the character the cursor is currently over

      • otherwise if there is only 1 cursor then x and y commands are applied to whole file whereas the other commands are executed with an implicit selection matching the current character

The command syntax was slightly tweaked to accept more terse commands.

  • When specifying text or regular expressions the trailing delimiter can be elided if the meaning is unambiguous.

  • If only an address is provided the print command will be executed.

  • The print command creates a selection matching its range.

  • In text entry \t inserts a literal tab character (sam only recognizes \n).

Hence the sam command ,x/pattern/ can be abbreviated to x/pattern

If after a command no selections remain, the editor will switch to normal mode otherwise it remains in visual mode.

Other differences compared to sam include:

  • The following commands are deliberately not implemented:

    • move m
    • copy t
    • print line address =
    • print character address =#
    • set current file mark k
    • undo u

  • Multi file support is currently very primitive:

    • the "regexp" construct to evaluate an address in a file matching regexp is currently not supported.

    • the following commands related to multiple file editing are not supported: b, B, n, D, f.

  • The special grouping semantics where all commands of a group operate on the the same state is not implemented.

  • The file mark address ' (and corresponding k command) is not supported

Command line prompt

Besides the sam command language the following commands are also recognized at the :-command prompt. Any unique prefix can be used.

:bdelete      close all windows which display the same file as the current one
:earlier      revert to older text state
:e            replace current file with a new one or reload it from disk
:langmap      set key equivalents for layout specific key mappings
:later        revert to newer text state
:!            launch external command, redirect keyboard input to it
:map          add a global key mapping
:map-window   add a window local key mapping
:new          open an empty window, arrange horizontally
:open         open a new window
:qall         close all windows, exit editor
:q            close currently focused window
:r            insert content of another file at current cursor position
:set          set the options below
:split        split window horizontally
:s            search and replace currently implemented in terms of `sed(1)`
:unmap        remove a global key mapping
:unmap-window remove a window local key mapping
:vnew         open an empty window, arrange vertically
:vsplit       split window vertically
:wq           write changes then close window
:w            write current buffer content to file

 shell      path            default $SHELL, /etc/passwd, /bin/sh

   set shell to use for external commands (e.g. <, >, |)

 escdelay   number          default 50 (50ms)

   miliseconds to wait to distinguish between an <Escape> key and other
   terminal escape sequences

 tabwidth   [1-8]           default 8

   set display width of a tab and number of spaces to use if
   expandtab is enabled

 expandtab  (yes|no)        default no

   whether typed in tabs should be expanded to tabwidth spaces

 autoindent (yes|no)        default no

   replicate spaces and tabs at the beginning of the line when
   starting a new line.

 number         (yes|no)    default no
 relativenumber (yes|no)    default no

   whether absolute or relative line numbers are printed alongside
   the file content

 syntax      name           default yes

   use syntax definition given (e.g. "ansi_c") or disable syntax
   highlighting if no such definition exists (e.g :set syntax off)

 show-spaces    (yes|no)    default no
 show-tabs      (yes|no)    default no
 show-newlines  (yes|no)    default no

   show/hide special white space replacement symbols

 cursorline (yes|no)        default no

   highlight the line on which the cursor currently resides

 colorcolumn number         default 0

   highlight the given column

 horizon    number          default 32768 (32K)

   how far back the lexer will look to synchronize parsing

 theme      name            default dark-16 | solarized (16 | 256 color)

   use the given theme / color scheme for syntax highlighting

Commands taking a file name will use a simple file open dialog based on the included vis-open shell script and vis-menu utility, if given a file pattern or directory.

:e *.c          # opens a menu with all C files
:e .            # opens a menu with all files of the current directory

Configuring vis: visrc.lua, and environment variables

Settings and keymaps can be specified in a visrc.lua file, which will be read by vis at runtime. An example visrc.lua file is installed in /usr/local/share/vis by default. This file can be copied to $XDG_CONFIG_HOME/vis (which defaults to $HOME/.config/vis) for further configuration.

The environment variable VIS_PATH can be set to override the path that vis will look for Lua support files as used for syntax highlighting. VIS_PATH defaults (in this order) to

  • The location of the vis binary
  • $XDG_CONFIG_HOME/vis, where $XDG_CONFIG_HOME refers to $HOME/.config if unset
  • /usr/local/share/vis or /usr/share/vis depending on the build configuration

Use :help and search for "Lua paths" to get the actual paths being used.

Runtime Configurable Key Bindings

Vis supports run time key bindings via the :{un,}map{,-window} set of commands. The basic syntax is:

:map <mode> <lhs> <rhs>

where mode is one of normal, insert, replace, visual, visual-line or operator-pending. lhs refers to the key to map, rhs is a key action or alias. An existing mapping can be overridden by appending ! to the map command.

Key mappings are always recursive, this means doing something like:

:map! normal j 2j

will not work because it will enter an endless loop. Instead vis uses pseudo keys referred to as key actions which can be used to invoke a set of available (see :help or for a list) editor functions. Hence the correct thing to do would be:

:map! normal j 2<cursor-line-down>

Unmapping works as follows:

:unmap <mode> <lhs>

The commands suffixed with -window only affect the currently active window.

Layout Specific Key Bindings

Vis allows to set key equivalents for non-latin keyboard layouts. This facilitates editing non-latin texts. The defined mappings take effect in all non-input modes, i.e. everywhere except in insert and replace mode.

For example, the following maps the movement keys in Russian layout:

:langmap ролд hjkl

More generally the syntax of the :langmap command is:

:langmap <sequence of keys in your layout> <sequence of equivalent keys in latin layout>

If the key sequences have not the same length, the rest of the longer sequence will be discarded.

Tab <-> Space conversion and Line endings \n vs \r\n

Tabs can optionally be expanded to a configurable number of spaces. The first line ending in the file determines what will be inserted upon a line break (defaults to \n).

Jump list and change list

A per window, file local jump list (navigate with CTRL+O and CTRL+I) and change list (navigate with g; and g,) is supported. The jump list is implemented as a fixed sized ring buffer.

Mouse support

The mouse is currently not used at all.

Non Goals

Some of the features of vim which will not be implemented:

  • tabs / multiple workspaces / advanced window management
  • file and directory browser
  • support for file archives (tar, zip, ...)
  • support for network protocols (ftp, http, ssh ...)
  • encryption
  • compression
  • GUIs (neither x11, motif, gtk, win32 ...) although the codebase should make it easy to add them
  • VimL
  • plugins (certainly not vimscript, if anything it should be lua based)
  • right-to-left text
  • ex mode
  • diff mode
  • vimgrep
  • internal spell checker
  • compile time configurable features / #ifdef mess

Lua API for in process extension

Vis provides a simple Lua API for in process extension. At startup the visrc.lua file is executed, this can be used to register a few event callbacks which will be invoked from the editor core. While executing these user scripts the editor core is blocked, hence it is intended for simple short lived (configuration) tasks.

At this time there exists no API stability guarantees.

  • vis
    • VERSION version information string in git describe format, same as reported by vis -v
    • MODE_NORMAL, MODE_OPERATOR_PENDING, MODE_INSERT, MODE_REPLACE, MODE_VISUAL, MODE_VISUAL_LINE mode constants
    • mode current mode (one of the above constants)
    • lexers LPeg lexer support module
    • ui
      • colors number of colors available
    • events hooks
      • start()
      • quit()
      • file_open(file)
      • file_save_pre(file, path) triggered before an attempted write to path boolean return value determines whether write will be proceeded
      • file_save_post(file, path) triggered after a successfull write to path
      • file_close(file)
      • win_open(win)
      • win_close(win)
      • theme_change(name)
    • files() iterator
    • win currently focused window
    • windows() iterator
    • command(cmd)
    • info(msg) display a single line message
    • message(msg) display an arbitrarily long message
    • open(filename)
    • textobject_register(function) register a Lua function as a text object, returns associated id or -1
    • textobject(id) select/execute a text object
    • motion_register(function) register a Lua function as a motion, returns associated id or -1
    • motion(id) select/execute a motion
    • command_register(name, function(argv, force, win, cursor, range)) hook up a Lua function to :name command
    • map(mode, key, function) map a Lua function to key in mode
    • feedkeys(keys) interpret keys as if they were read from the keyboard
    • recording boolean property, indicates whether a macro is currently being recorded
  • file
    • content(pos, len) or content({start, finish})
    • insert(pos, data)
    • delete(pos, len) or delete({start, finish})
    • lines_iterator()
    • name
    • lines[0..#lines+1] array giving read/write access to lines
    • newlines type of newlines either "lf" or "crlf"
    • size current file size in bytes
    • modified whether the file contains unsaved changes
  • window
    • file
    • cursors_iterator()
    • cursors[1..#cursors] array giving read access to all cursors
    • cursor primary cursor
    • syntax lexer name used for syntax highlighting or nil
    • map(mode, key, function) map a Lua function to key in mode, local to the given window
    • style_define(id, style) where id is a constant and style a string
    • style(id, start, end) apply style to file range, will be cleared after every redraw
    • viewport a range denoting the currently visible area of the window
    • width and height, readonly, query window dimension
    • status(left [,right]) set the content of the window status bar
    • draw() redraw window content
  • cursor
    • line (1 based), col (1 based)
    • to(line, col)
    • pos bytes from start of file (0 based)
    • number one based index of cursor
    • selection read/write access to selection represented as a range
  • range denoted by absolute postions in bytes from the start of the file, an invalid range is represented as nil
    • start
    • finish

Most of the exposed objects are managed by the C core. Allthough there is a simple object life time management mechanism in place, it is still recommended to not let the Lua objects escape from the event handlers (e.g. by assigning to global Lua variables).

Text management using a piece table/chain

The core of this editor is a persistent data structure called a piece table which supports all modifications in O(m), where m is the number of non-consecutive editing operations. This bound could be further improved to O(log m) by use of a balanced search tree, however the additional complexity doesn't seem to be worth it, for now.

The actual data is stored in buffers which are strictly append only. There exist two types of buffers, one fixed-sized holding the original file content and multiple append-only ones storing the modifications.

A text, i.e. a sequence of bytes, is represented as a double linked list of pieces each with a pointer into a buffer and an associated length. Pieces are never deleted but instead always kept around for redo/undo support. A span is a range of pieces, consisting of a start and end piece. Changes to the text are always performed by swapping out an existing, possibly empty, span with a new one.

An empty document is represented by two special sentinel pieces which always exist:

/-+ --> +-\
| |     | |
\-+ <-- +-/
 #1     #2

Loading a file from disk is as simple as mmap(2)-ing it into a buffer, creating a corresponding piece and adding it to the double linked list. Hence loading a file is a constant time operation i.e. independent of the actual file size (assuming the operating system uses demand paging).

/-+ --> +-----------------+ --> +-\
| |     | I am an editor! |     | |
\-+ <-- +-----------------+ <-- +-/
 #1             #3              #2

Insert

Inserting a junk of data amounts to appending the new content to a modification buffer. Followed by the creation of new pieces. An insertion in the middle of an existing piece requires the creation of 3 new pieces. Two of them hold references to the text before respectively after the insertion point. While the third one points to the newly added text.

/-+ --> +---------------+ --> +----------------+ --> +--+ --> +-\
| |     | I am an editor|     |which sucks less|     |! |     | |
\-+ <-- +---------------+ <-- +----------------+ <-- +--+ <-- +-/
 #1            #4                   #5                #6      #2

       modification buffer content: "which sucks less"

During this insertion operation the old span [3,3] has been replaced by the new span [4,6]. Notice that the pieces in the old span were not changed, therefore still point to their predecessors/successors, and can thus be swapped back in.

If the insertion point happens to be at a piece boundary, the old span is empty, and the new span only consists of the newly allocated piece.

Delete

Similarly a delete operation splits the pieces at appropriate places.

/-+ --> +-----+ --> +--+ --> +-\
| |     | I am|     |! |     | |
\-+ <-- +-----+ <-- +--+ <-- +-/
 #1       #7         #6      #2

Where the old span [4,5] got replaced by the new span [7,7]. The underlying buffers remain unchanged.

Cache

Notice that the common case of appending text to a given piece is fast since, the new data is simply appended to the buffer and the piece length is increased accordingly. In order to keep the number of pieces down, the least recently edited piece is cached and changes to it are done in place (this is the only time buffers are modified in a non-append only way). As a consequence they can not be undone.

Undo/redo

Since the buffers are append only and the spans/pieces are never destroyed undo/redo functionality is implemented by swapping the required spans/pieces back in.

As illustrated above, each change to the text is recorded by an old and a new span. An action consists of multiple changes which logically belong to each other and should thus also be reverted together. For example a search and replace operation is one action with possibly many changes all over the text.

The text states can be marked by means of a snapshotting operation. Snapshotting saves a new node to the history graph and creates a fresh Action to which future changes will be appended until the next snapshot.

Actions make up the nodes of a connected digraph, each representing a state of the file at some time during the current editing session. The edges of the digraph represent state transitions that are supported by the editor. The edges are implemented as four Action pointers (prev, next, earlier, and later).

The editor operations that execute the four aforementioned transitions are undo, redo,earlier, and later, respectively. Undo and redo behave in the traditional manner, changing the state one Action at a time. Earlier and later, however, traverse the states in chronological order, which may occasionally involve undoing and redoing many Actions at once.

Marks

Because we are working with a persistent data structure marks can be represented as pointers into the underlying (append only) buffers. To get the position of an existing mark it suffices to traverse the list of pieces and perform a range query on the associated buffer segments. This also nicely integrates with the undo/redo mechanism. If a span is swapped out all contained marks (pointers) become invalid because they are no longer reachable from the piece chain. Once an action is undone, and the corresponding span swapped back in, the marks become visible again. No explicit mark management is necessary.

Properties

The main advantage of the piece chain as described above is that all operations are performed independent of the file size but instead linear in the number of pieces i.e. editing operations. The original file buffer never changes which means the mmap(2) can be performed read only which makes optimal use of the operating system's virtual memory / paging system.

The maximum editable file size is limited by the amount of memory a process is allowed to map into its virtual address space, this shouldn't be a problem in practice. The whole process assumes that the file can be used as is. In particular the editor assumes all input and the file itself is encoded as UTF-8. Supporting other encodings would require conversion using iconv(3) or similar upon loading and saving the document.

Similarly the editor has to cope with the fact that lines can be terminated either by \n or \r\n. There is no conversion to a line based structure in place. Instead the whole text is exposed as a sequence of bytes. All addressing happens by means of zero based byte offsets from the start of the file.

The main disadvantage of the piece chain data structure is that the text is not stored contiguous in memory which makes seeking around somewhat harder. This also implies that standard library calls like the regex(3) functions can not be used as is. However this is the case for all but the most simple data structures used in text editors.

Syntax Highlighting using Parsing Expression Grammars

Parsing Expression Grammars (PEG) have the nice property that they are closed under composition. In the context of an editor this is useful because lexers can be embedded into each other, thus simplifying syntax highlighting definitions.

Vis reuses the Lua LPeg based lexers from the Scintillua project.

Future Plans / Ideas

This section contains some ideas for further architectural changes.

Event loop with asynchronous I/O

The editor core should feature a proper main loop mechanism supporting asynchronous non-blocking and always cancelable tasks which could be used for all possibly long lived actions such as:

  • !, = operators
  • :substitute and :write commands
  • code completion
  • compiler integration (similar to vim's quick fix functionality)

Client/Server Architecture / RPC interface

In principle it would be nice to follow a similar client/server approach as sam/samterm i.e. having the main editor as a server and each window as a separate client process with communication over a unix domain socket.

That way window management would be taken care of by dwm or dvtm and the different client processes would still share common cut/paste registers etc.

This would also enable a language agnostic plugin system.

Efficient Search and Replace

Currently the editor copies the whole text to a contiguous memory block and then uses the standard regex functions from libc. Clearly this is not a satisfactory solution for large files.

The long term solution is to write our own regular expression engine or modify an existing one to make use of the iterator API. This would allow efficient search without having to double memory consumption.

The used regex engine should use a non-backtracking algorithm. Useful resources include:

Developer Overview

Feel free to join #vis-editor on freenode to discuss development related issues.

A quick overview over the code structure to get you started:

File(s) Description
array.[ch] dynamically growing array, can store arbitrarily sized objects
buffer.[ch] dynamically growing buffer used for registers and macros
config.def.h definition of default key bindings (mapping of key actions)
lexers/ Lua LPeg based lexers used for syntax highlighting
main.c key action definitions, program entry point
map.[ch] crit-bit tree based map supporting unique prefix lookups and ordered iteration, used to implement :-commands and run time key bindings
register.[ch] register implementation, system clipboard integration via vis-clipboard
ring-buffer.[ch] fixed size ring buffer used for the jump list
sam.[ch] structural regular expression based command language
text.[ch] low level text / marks / {un,re}do tree / piece table implementation
text-motions.[ch] movement functions take a file position and return a new one
text-objects.[ch] functions take a file position and return a file range
text-regex.[ch] text search functionality, designated place for regex engine
text-util.[ch] text related utility functions mostly dealing with file ranges
ui-curses.[ch] a terminal / curses based user interface implementation
ui.h abstract interface which has to be implemented by ui backends
view.[ch] ui-independent viewport, shows part of a file, syntax highlighting, cursor placement, selection handling
vis-cmds.c vi(m) :-command implementation
vis-core.h internal header file, various structs for core editor primitives
vis.c vi(m) specific editor frontend implementation
vis.h vi(m) specific editor frontend library public API
vis-lua.[ch] Lua bindings, exposing core vis APIs for in process extension
vis-modes.c vi(m) mode switching, enter/leave event handling
vis-motions.c vi(m) cursor motion implementations, uses text-motions.h internally
vis-operators.c vi(m) operator implementation
vis-prompt.c :, / and ? prompt implemented as a regular file/window with custom key bindings
vis-text-objects.c vi(m) text object implementations, uses text-objects.h internally
vis.lua Lua library for vis, providing parts of the exposed API
visrc.lua Lua startup and configuration script

Testing infrastructure for the [low level core data structures] (https://github.com/martanne/vis-test/tree/master/core), [vim compatibility] (https://github.com/martanne/vis-test/tree/master/vim) and [vis specific features] (https://github.com/martanne/vis-test/tree/master/vis) is in place, but lacks proper test cases.