PCB and mount project for Arcooda Arcade monitor
I found the original PCB coming with the monitor to be too big and not super practical when combined with djcall's feet design. So I designed a mini PCB and mount to fit in the gap using the same mounting holes.
To assemble the PCB you need to source:
- 1x thruhole 2 colors LED (ex: XLMDKVG29M )
- 1x JST 8pin connector B8B-PH-K-S(LF)(SN)
- 5x TS342A2P Tactile Switches
To assemble the mount you need to source:
- 2x M2*4mm self tapping screws
To fix the mount in place you'll need to upgrade your M5 screws to at least 25mm. You'll need 2 with matching extra nuts.
Notes
- v4 is the same as v3 except I swapped the LED component for something available at the fab.
- If you want a mount for the original PCB, you can grab my other design on Printable right here.