ufodone/envisalink_new

Issues

• UNO IP Arm Home or Night through Home Assistant sends Arm Away to board

  #147 opened 6 months ago by copperlab
  35

• Starting the arm countdown and then immediately disarming doesn't work.

  #140 opened 7 months ago by andredigenova
  4

• Stay arming on a keypad causes the integration to fire an "alarm triggered" event in Home Assistant

  #186 opened a month ago by andredigenova
  3

• Uno Beta - Unable to disarm when triggered

  #184 opened 2 months ago by zim514
  3

• Uno Beta - 18 Character password fails to authenticate

  #182 opened 2 months ago by zim514
  2

• Uno Beta - Unable to disarm during exit delay

  #183 opened 2 months ago by zim514
  2

• UNO Panel Logs and intital test report

  #177 opened 2 months ago by zim514
  14

• Disabling "Night mode"

  #179 opened 2 months ago by FaBRiK74
  0

• Advanced settings cannot be changed if Partition Assignments are invalid

  #178 opened 2 months ago by ufodone
  0

• Global bypass

  #175 opened 2 months ago by elechtma
  1

• Support for evl4/uno with dsc Neo panel integration with HA

  #174 opened 2 months ago by lbrettman
  2

• EV4 (208) Won't Connect

  #173 opened 2 months ago by garyak
  2

• bypass switches not working

  #172 opened 2 months ago by elechtma
  2

• 'requires code to arm' is not configurable

  #170 opened 2 months ago by Lindahl
  2

• Sets option flow config_entry explicitly, which is deprecated

  #162 opened 2 months ago by jbistis
  3

• Bypassing zone on second partition does not work.

  #119 opened 2 months ago by 949BFN
  1

• image not Available

  #131 opened 2 months ago by doczong
  2

• Failure to Setup Integration (Failed setup, will retry)

  #138 opened 7 months ago by ChipSkylark37
  8

• Bypass status of a zone

  #163 opened 3 months ago by AvSingh75
  3

• Integration interprets fire trouble as fire alarm

  #171 opened 2 months ago by LanceNickel
  1

• Arm_away, Night and Arm_home all default to Arm_home

  #167 opened 3 months ago by DineshChr
  5

• Pre-release v1.0.0-beta1 - Mushroom Entity Card Activity

  #165 opened 3 months ago by garyak
  11

• Bypassed zone shows as clear

  #135 opened 4 months ago by doppiaemme
  4

• "Armed/Disarmed By" Attribute not Populating

  #143 opened 4 months ago by dwmead86
  2

• Help with zones only showing closed

  #160 opened 4 months ago by bwoods113
  2

• EVL-3 disconnects and re-connects, usually every couple hours

  #157 opened 4 months ago by raspman
  4

• Honeywell Vista Arm Stay Instant

  #156 opened 4 months ago by Blueion76
  2

• "Failed to Initialize" after updating to v0.9.3

  #153 opened 4 months ago by tasinclair4
  4

• EVL-4 in Standalone Mode (UNO) Fails To Detect Panel Type

  #154 opened 4 months ago by clearwave1
  6

• Honeywell Vista system state not properly reflecting arm night mode

  #146 opened 5 months ago by blfriedman
  15

• Bell Circuit Trouble Status

  #137 opened 5 months ago by BobRobertBob
  2

• 2024.11.0 Depreciation warnings

  #151 opened 5 months ago by Nick425321
  2

• Add Honeywell %20 command as a recognized command

  #141 opened 5 months ago by ufodone
  0

• Panic switches for Police, Ambulance, and Fire.

  #126 opened 5 months ago by akagarwal
  4

• New Uno Envisalink Integration Failing to Authenticate

  #150 opened 5 months ago by tamorgen
  2

• DSC 4 EVL / Cannot Disarm

  #145 opened 6 months ago by cjoha
  11

• "Failed setup, will retry" Was working for a day then getting this error HAOS Envisalink4 (see pics)

  #144 opened 6 months ago by nutshellml
  6

• unavailable more so then regular integration

  #129 opened 7 months ago by dasb00ter
  4

• Envisalink 4 suddenly requiring code to Arm Alarm

  #127 opened 7 months ago by jdgiddings
  2

• After a fault clears integration state remains in Fault and cannot be cleared

  #124 opened 7 months ago by Tipalo
  2

• Need to always reload integration

  #123 opened 7 months ago by TurboTronix
  4

• Data format invalid from Envisalink, ignoring..

  #116 opened 7 months ago by brijeshsinghparihar
  2

• Unable to Disarm - Envisalink_new sending HA password!

  #139 opened 7 months ago by robin-ellins
  2

• Request to Add PGM1 through PGM4

  #132 opened 8 months ago by BobRobertBob
  2

• Zone Fault status not updating

  #122 opened 9 months ago by tivo65
  4

• DSC PGM output not working

  #115 opened 10 months ago by nickb24
  16

• Attribute for zone restorals

  #112 opened 10 months ago by chelming
  4

• Panel chime switch entity disappears in V.0.9.0 (DSC)

  #113 opened 10 months ago by aslm1
  4

• "arm night" via HA arms the panel in stay/home mode

  #114 opened 10 months ago by jonoberheide
  7

• PGM Setup

  #110 opened 10 months ago by durosity
  2