This is the Android device configuration for Xperia L.
To setup a tree and build images for the device do the following:
repo init as described by Google over at:
http://source.android.com/source/downloading.html
Put the following snippet in .repo/local_manifests/c2105.xml
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="sony" fetch="git://github.com/sonyxperiadev/" />
<remove-project name="platform/hardware/akm" />
<remove-project name="platform/hardware/invensense" />
<remove-project name="platform/hardware/qcom/camera" />
<remove-project name="platform/hardware/qcom/display" />
<remove-project name="platform/hardware/qcom/keymaster" />
<remove-project name="platform/hardware/qcom/media" />
<remove-project name="platform/hardware/qcom/msm8960" />
<remove-project name="platform/hardware/qcom/power" />
<remove-project name="platform/hardware/qcom/sensors" />
<project path="device/sony/c2105" name="device-sony-c2105" groups="device" remote="sony" revision="master" />
</manifest>Download the zip file with vendor binaries from: http://developer.sonymobile.com/knowledge-base/open-source/android-open-source-project-for-xperia-devices/
In the root of your Android code tree unzip the SW_binaries_for_Xperia_L_v1.zip.
You should now have a directory named vendor/sony/c2105 in your tree.
repo syncsource ./build/envsetup.shlunch full_c2105-userdebugmake
To flash the images produced make sure your device is unlocked, as described on http://unlockbootloader.sonymobile.com/
Enter fastboot mode on the device by pressing volume up while inserting the USB
cable or execute adb reboot bootloader.
fastboot flash boot $OUT/boot.imgfastboot flash system $OUT/system.imgfastboot flash userdata $OUT/userdata.img
Reflashing userdata is not necessary every time, but incompatibilities with previous content might result in a device that doesn't boot. If this happens try to reflash just the userdata again.
Please see the project wiki for more information: https://github.com/sonyxperiadev/device-sony-c2105/wiki