service-list-builder

I am not responsible for damage caused to computer. This tool is powerful and for advanced users only. There is a risk of damaging your operating system if you disable core services that are required for Windows to function correctly. It is your responsibility to use suitable service configurations for your specific operating system. If you would like to re-build the scripts, ensure to run the generated Services-Enable.bat script beforehand as the tool relies on the current state of services for building future scripts.

Usage and Program Logic

Download the latest release from the releases tab
Open lists.ini in a text editor
- Every user-mode service NOT specified in the [enabled_services] section will get disabled. This section acts as whitelist of user-mode services NOT to disable
- Individual services to disable can be explicitly specified in the [individual_disabled_services] section. This section does not follow the disable all except logic. Only the services specified in this section will get disabled. This is useful in situations where the user only needs to disable a few user-mode services instead of using the batch approach with [enabled_services] or you would like to disable kernel-mode services at all
- Paths to folders or binaries can be specified in the [rename_binaries] section. The logic behind this is that when a binary gets renamed to anything other than its original file name, it will not run. Exclude the drive letter from the path as it is handled by the script. For example, C:\folder\program.exe should be written as \folder\program.exe
Pass lists.ini as an argument to the program through the command-line with the command below to build the scripts
```
service-list-builder --config lists.ini
```
The scripts will be built in the build folder. NSudo is required to run the scripts with Enable All Privileges option enabled to prevent errors when writing to registry and renaming files. It is included in the release

Restoring Services Offline

Important

The methodology is only applicable to scripts built with service-list-builder v1.0.0 and above.

If you are unable to boot or something goes completely wrong after running Services-Disable.bat for whatever reason, you can simply restore them offline by loading the registry hive and running the Services-Enable.bat script. This requires an already installed dual-boot, Windows recovery environment or Windows setup.

Open the Services-Enable.bat script in a text editor and change the DRIVE_LETTER variable to the partition in which the problematic Windows installation is installed to (be careful not to use the wrong drive letter if multiple dual-boots are configured)
- If you are in WinRE or Windows setup, you can use notepad's File -> Open... dialog by typing notepad in CMD to browse the file system
Run the script with NSudo
- If you are using WinRE or Windows setup, NSudo may not open and running the script directly (without NSudo) may be sufficient due to already elevated privileges
Now that the services should be restored, boot to the operating system. Don't forget to change the DRIVE_LETTER variable back to it's default value

Debugging Services

Often while experimenting, some specific functionality might be broken after running the Services-Disable.bat script but works as intended after running the Services-Enable.bat script. If the functionality is still broken after enabling services, then the problem is not related to services.

As a short-term and temporary solution, you can simply run Services-Enable.bat, do whatever you are trying to do, then run Services-Disable.bat again (that's the idea of having toggle scripts!). For a long-term solution, you need to find out what services are required for the functionality using the systematic methodology below. Once you have found which services are a dependency of the given functionality, you can update your lists.ini and/or Services-Disable.bat script.

Methodology

Important

The methodology is only applicable to scripts built with service-list-builder v1.0.0 and above.

If you haven't disabled services at this stage, run the Services-Disable.bat script
Create a new script named Debug-Services.bat
Create a text file named dependencies.txt
Open the Services-Enable.bat and Debug-Services.bat scripts in a text editor
In the Services-Enable.bat script, copy all the lines from the start of the script until and including the reg query command into the Debug-Services.bat script. The lines that rename binaries (if you have any) must also be copied. These lines begin with REN

If you have any lines that change the LowerFilters and/or UpperFilters registry keys, you will need to handle those first, otherwise, you can continue to step 7 if you don't have any. Copy those lines and the line that changes the Start value for each driver inside the filter to the Debug-Services.bat script. The null terminator character (\0) is not part of the driver name (e.g. \0iorate is iorate).

Example

An example of what the filters part of the Services-Enable.bat script could look like:

reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}" /v "LowerFilters" /t REG_MULTI_SZ /d "EhStorClass" /f
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}" /v "LowerFilters" /t REG_MULTI_SZ /d "fvevol\0iorate\0rdyboost" /f
...

The lines that must be copied to the Debug-Services.bat script:

reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}" /v "LowerFilters" /t REG_MULTI_SZ /d "EhStorClass" /f
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}" /v "LowerFilters" /t REG_MULTI_SZ /d "fvevol\0iorate\0rdyboost" /f
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\EhStorClass" /v "Start" /t REG_DWORD /d "0" /f
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\fvevol" /v "Start" /t REG_DWORD /d "0" /f
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\iorate" /v "Start" /t REG_DWORD /d "0" /f
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\rdyboost" /v "Start" /t REG_DWORD /d "0" /f

Copy the lines that enable the next 10 services from the Services-Enable.bat script to the Debug-Services.bat script
Run the Debug-Services.bat script with NSudo and restart your PC
Test the functionality. If it is NOT working then return to step 7, otherwise, continue to step 10
Disable the last 10 services in the Debug-Services.bat individually by changing the start value to 4 then restart your PC. Keep repeating until the functionality breaks again. When it breaks, continue to step 11
Now that you have identified which service breaks the functionality, try to re-enable it. If you can reproduce the functionality breaking while the service is disabled and works with it enabled a few times, then make a note of this service in dependencies.txt and continue to the next step
Delete Debug-Services.bat as it is no longer required
The service's dependencies must also be enabled if there are any. service-list-builder can be used to get the entire dependency tree for a given service with the command below. Note every dependency that appears in the output to dependencies.txt
```
service-list-builder.exe --kernel-mode --get-dependencies <service>
```
For each service that you noted down in dependencies.txt, get the default start value for it from the Services-Enable.bat script and change the start value for the service in the Services-Disable.bat script. Run the Services-Disable.bat script with NSudo to check whether the functionality is working. If it is not working, return to step 1 and repeat the entire process with the newly edited/latest Services-Disable.bat script, otherwise, continue to step 15. This is because a service that is required for the functionality might not have any service dependencies
At this stage, your functionality should be working after running the Services-Disable.bat script. Now you can update your lists.ini with everything that you noted in dependencies.txt for the future

valleyofdoom/service-list-builder

service-list-builder

Usage and Program Logic

Restoring Services Offline

Debugging Services

Methodology