Waveshare-DSI-LCD: A Shell repository from vasilisvg

#Step 1: Download and enter the Waveshare-DSI-LCD driver folder
git clone https://github.com/waveshare/Waveshare-DSI-LCD
cd Waveshare-DSI-LCD

#Step 2: Enter uname -a in the terminal to view the kernel version and cd to the corresponding file directory
#5.15.61 then run the following command
cd 5.15.61
#5.15.76 then run the following command
#cd 5.15.76

#Step 3: Please check the bits of your system, enter the 32 directory for 32-bit systems, and enter the 64 directory for 64-bit systems
cd 32
#cd 64

#Step 4: Enter your corresponding model command to install the driver, pay attention to the selection of the I2C DIP switch
#2.8inch DSI LCD 480×640：
sudo bash ./WS_xinchDSI_MAIN.sh 28 I2C0
#3.4inch DSI LCD (C) 800×800
sudo bash ./WS_xinchDSI_MAIN.sh 34C I2C0
#4inch DSI LCD 480×800：
sudo bash ./WS_xinchDSI_MAIN.sh 40 I2C0
#4inch DSI LCD (C) 720×720
sudo bash ./WS_xinchDSI_MAIN.sh 40C I2C0
#7inch DSI LCD (C) 1024×600：
sudo bash ./WS_xinchDSI_MAIN.sh 70C I2C1
#7.9ich DSI LCD 400×1280：
sudo bash ./WS_xinchDSI_MAIN.sh 79 I2C0
#11.9inch DSI LCD 320×1480：
sudo bash ./WS_xinchDSI_MAIN.sh 119 I2C0
#8inch DSI LCD (C) 1280×800驱动：
sudo bash ./WS_xinchDSI_MAIN.sh 80C I2C0
#10.1inch DSI LCD (C) 1280×800驱动：
sudo bash ./WS_xinchDSI_MAIN.sh 101C I2C0

#Step 5: Wait for a few seconds, when the driver installation is complete and no error is prompted, restart and load the DSI driver and it can be used normally
sudo reboot

Note: The above steps need to ensure that the Raspberry Pi can be connected to the Internet normally.
===========================================================================================================

#第一步：下载并进入Waveshare-DSI-LCD驱动文件夹
git clone https://github.com/waveshare/Waveshare-DSI-LCD
cd Waveshare-DSI-LCD
 
#第二步：终端输入uname -a查看内核版本，并cd到对应文件目录
#5.15.61则运行下面指令
cd 5.15.61
#5.15.76则运行下面指令
#cd 5.15.76
 
#第三步：请确定当前使用的系统是多少位的，32位系统进入32目录，64位系统进入64目录
cd 32
#cd 64
 
#第四步：选择您对应的型号，复制指令安装驱动，如需修改I2C0 / I2C1，请注意选择正确的拨码开关再上电使用；
#2.8inch DSI LCD 480×640：
sudo bash ./WS_xinchDSI_MAIN.sh 28 I2C0
#3.4inch DSI LCD (C) 800×800
sudo bash ./WS_xinchDSI_MAIN.sh 34C I2C0
#4inch DSI LCD 480×800：
sudo bash ./WS_xinchDSI_MAIN.sh 40 I2C0
#4inch DSI LCD (C) 720×720
sudo bash ./WS_xinchDSI_MAIN.sh 40C I2C0
#7inch DSI LCD (C) 1024×600：
sudo bash ./WS_xinchDSI_MAIN.sh 70C I2C1
#7.9ich DSI LCD 400×1280：
sudo bash ./WS_xinchDSI_MAIN.sh 79 I2C0
#11.9inch DSI LCD 320×1480：
sudo bash ./WS_xinchDSI_MAIN.sh 119 I2C0
#8inch DSI LCD (C) 1280×800 ：
sudo bash ./WS_xinchDSI_MAIN.sh 80C I2C0
#10.1inch DSI LCD (C) 1280×800：
sudo bash ./WS_xinchDSI_MAIN.sh 101C I2C0
 
#第五步：等待几秒，当驱动安装完成，没有提示任何报错时，进行重启加载DSI驱动即可正常使用
sudo reboot

#注意：以上步骤需要确保树莓派可以正常连接到互联网。
vasilisvg/Waveshare-DSI-LCD
