docker-openldap

The image is based on Debian stable ("jessie" at the moment). The Dockerfile is inspired by cnry/openldap, but as said before, running a stable Debian and be a little less verbose, but more complete in the configuration.

NOTE: On purpose, there is no secured channel (TLS/SSL), because I believe that this service should never be exposed to the internet, but only be used directly by other Docker containers using the --link option.

Usage

The most simple form would be to start the application like so (however this is not the recommended way - see below):

docker run -d -p 389:389 -e SLAPD_PASSWORD=mysecretpassword -e SLAPD_DOMAIN=ldap.example.org dinkel/openldap

To get the full potential this image offers, one should first create a data-only container or (named) volumes (see "Data persistence" below) and start the OpenLDAP daemon in one of these ways:

docker run -d --volumes-from your-data-container [CONFIG] dinkel/openldap
docker run -d --volume your-config-volume:/etc/ldap --volume your-data-volume:/var/lib/ldap [CONFIG] dinkel/openldap

An application talking to OpenLDAP should then --link the container:

docker run -d --link openldap:openldap image-using-openldap

The name after the colon in the --link section is the hostname where the OpenLDAP daemon is listening to (the port is the default port 389).

Configuration (environment variables)

For the first run, one has to set at least the first two environment variables. After the first start of the image (and the initial configuration), these envirnonment variables are not evaluated again (see the SLAPD_FORCE_RECONFIGURE option).

SLAPD_PASSWORD (required) - sets the password for the admin user.
SLAPD_DOMAIN (required) - sets the DC (Domain component) parts. E.g. if one sets it to ldap.example.org, the generated base DC parts would be ...,dc=ldap,dc=example,dc=org.
SLAPD_ORGANIZATION (defaults to $SLAPD_DOMAIN) - represents the human readable company name (e.g. Example Inc.).
SLAPD_CONFIG_PASSWORD - allows password protected access to the dn=config branch. This helps to reconfigure the server without interruption (read the official documentation).
SLAPD_ADDITIONAL_SCHEMAS - loads additional schemas provided in the slapd package that are not installed using the environment variable with comma-separated enties. As of writing these instructions, there are the following additional schemas available: collective, corba, duaconf, dyngroup, java, misc, openldap, pmi and ppolicy.
SLAPD_ADDITIONAL_MODULES - comma-separated list of modules to load. It will try to run .ldif files with a corresponsing name from the module directory. Currently only memberof and ppolicy are avaliable.
SLAPD_FORCE_RECONFIGURE - (defaults to false) Used if one needs to reconfigure the slapd service after the image has been initialized. Set this value to true to reconfigure the image.

Setting up ppolicy

The ppolicy module provides enhanced password management capabilities that are applied to non-rootdn bind attempts in OpenLDAP. In order to it, one has to load both the schema ppolicy and the module ppolicy:

-e SLAPD_DOMAIN=ldap.example.org -e SLAPD_ADDITIONAL_SCHEMAS=ppolicy -e SLAPD_ADDITIONAL_MODULES=ppolicy`

There is one additional environment variable available:

SLAPD_PPOLICY_DN_PREFIX - (defaults to cn=default,ou=policies) sets the dn prefix used in modules/ppolicy.ldif for the olcPPolicyDefault attribute. The value used for olcPPolicyDefault is derived from $SLAPD_PPOLICY_DN_PREFIX,(dc component parts from $SLAPD_DOMAIN).

After loading the module, you have to load a default password policy. The contents of default-policy.ldif should look something like this:

# Define password policy
dn: ou=policies,dc=ldap,dc=example,dc=org
objectClass: organizationalUnit
ou: policies

dn: cn=default,ou=policies,dc=ldap,dc=example,dc=org
objectClass: applicationProcess
objectClass: pwdPolicy
cn: default
pwdAllowUserChange: TRUE
pwdAttribute: userPassword
pwdCheckQuality: 1
# 7 days
pwdExpireWarning: 604800
pwdFailureCountInterval: 0
pwdGraceAuthNLimit: 0
pwdInHistory: 5
pwdLockout: TRUE
# 30 minutes
pwdLockoutDuration: 1800
# 180 days
pwdMaxAge: 15552000
pwdMaxFailure: 5
pwdMinAge: 0
pwdMinLength: 6
pwdMustChange: TRUE
pwdSafeModify: FALSE

See the docs for descriptions on the available attributes and what they mean.

Assuming you are on a host that has the client side tools installed (maybe you have to change the hostname as well), run:

ldapadd -h localhost -x -c -D 'cn=admin,dc=ldap,dc=example,dc=org' -w [$SLAPD_PASSWORD] -f default-policy.ldif

or use the prepopulation capability described below.

Prepopulate with data

There are some use cases where it is desired to prepopulate the database with some data before launching the container. In order to do that, one can mount a host directory as a data volume in /etc/ldap.dist/prepopulate. Each LDIF file is run through slapadd in alphabetical order. E.g.

docker run -d --volume /path/to/dir/with/ldif-files:/etc/ldap.dist/prepopulate [CONFIG] dinkel/openldap

Please note that the prepopulation files are only processed on the containers first run (a.k.a. as long as there is no data in the database).

Data persistence