Slicer for Fracktal Works 3D Printers, heavily optimized for dual extrusion and support material removal
- Slow down on overhangs above certain angle
- Slow down overhanging features over soluable support
- Dynamic Prime Tower Volume calculation based on Nozzle size and Layer height
- Optimised same material and dual material support settings
- For same material support, keep support_z_dist=0 and lower the flow rate of the skin over the support, extra flow rate to compensate on the second skin to have consistant results across layer heights and nozzle diameters
- Test Same material support for each nozzle x layer height x material
- Test Soluable supports for each nozzle x layer height x material