vector76/gridfinity_openscad

Issues

• Labels on two sides instead of one

  #38 opened 4 months ago by pupeno
  0

• How to edit total height of a box?

  #33 opened a year ago by iweputo
  2

• Can´t open and use these SCAD files

  #34 opened a year ago by charlybrown1982
  1

• Request - baseplates with half-pitch lid.

  #32 opened a year ago by Rivenwolf2
  0

• Request - Fingerslide Radius Parameter

  #26 opened 2 years ago by Brausmith
  1

• "filled in" should optionally not ignore "lip style"

  #27 opened 2 years ago by avxmw
  0

• Divider upturns with Lip Style

  #25 opened 2 years ago by Brausmith
  0

• Unable to use z-height lower than 2

  #24 opened 2 years ago by MrUzagi
  3

• Feature Request: centered labeling shelves

  #21 opened 2 years ago by mrmattmorris
  4

• Idea: Half-size bins

  #19 opened 2 years ago by rcarmo
  3

• Not an issue but a question

  #14 opened 2 years ago by hvddrift
  1

• modularized root cups

  #10 opened 2 years ago by benzvan
  6

• Setting Height above 7 x 7MM

  #9 opened 2 years ago by crazyn0va
  1

• Need to increase bottom thickness; which approach to differences between this and the original?

  #6 opened 2 years ago by universalist
  3

• Basic cup should be centered

  #1 opened 2 years ago by RussNelson
  2

• why import?

  #3 opened 2 years ago by RussNelson
  2