vekexasia/comfoair-esp32

Issues

• command ventilation_supply_only doesn't work

  #85 opened 21 days ago by Hans-0
  0

• Help connecting

  #84 opened 2 months ago by AndrewAkinson
  1

• auto mode not available

  #52 opened 2 years ago by J1Buskens
  13

• Showcase Your setup and compatibility list

  #74 opened 8 months ago by vekexasia
  2

• RJ45 Pinout

  #83 opened 2 months ago by belowm
  1

• Activate bypass for 24h

  #79 opened 5 months ago by wiljums
  1

• ComfoAIR E300R (non Q) compatibility

  #82 opened 4 months ago by muebau
  0

• Run on a esp32-s2?

  #81 opened 4 months ago by thundo
  0

• Add Long Term Statistics support

  #80 opened 5 months ago by albertofralbe
  0

• compilation error

  #78 opened 6 months ago by saker88
  7

• compiling error

  #76 opened 6 months ago by mattapo
  8

• Showing up in HA but entity stay in UNKNOWN state

  #77 opened 6 months ago by bcornelis
  7

• ComfoAir 70

  #53 opened 6 months ago by JBN164
  5

• Integration with existing UI for CA350

  #33 opened 6 months ago by mat3u
  6

• Unknown entity state after restart.

  #55 opened 6 months ago by SzymaneKwr
  7

• RX/TX pinout for node mcu ESP32s wroom

  #58 opened a year ago by KASR
  3

• Instruct ComfoAir to resend all data on the CAN bus

  #63 opened 8 months ago by sodre90
  2

• Sending commands not working with the esphome version

  #57 opened 8 months ago by Paddy-van-CH
  3

• Esp32 set ventilation leve 3 after reconeection

  #28 opened 8 months ago by atomic339
  2

• ESPHome 2023.10.5 & comfoair-eps32 error in compile

  #60 opened 8 months ago by tudstudent
  0

• Error on comfoconnect

  #68 opened 8 months ago by guillaum111
  4

• Send only selected items

  #72 opened 8 months ago by Schildkroetenprogrammierer
  2

• Send command over http

  #73 opened 8 months ago by KosakAlmighty
  1

• Missing Controls entities in ESPHome integration

  #50 opened 10 months ago by lskuba
  20

• Idea of making a project on ESP32 + ETHERNET

  #31 opened 2 years ago by kamil2466
  30

• Custom PCB - missing CPL file

  #49 opened 10 months ago by dan-s-github
  9

• comfoair ESP32 - MQTT supported in ESPhome?

  #59 opened 10 months ago by tudstudent
  5

• _builtin.h:36:10: fatal error: freertos/FreeRTOS.h:

  #61 opened 10 months ago by HAUSER3
  1

• Error in communication after connecting ESP to ComfoAir (wont even start)

  #66 opened 10 months ago by K3iVi
  5

• Deprecated warning for esp_intr.h

  #67 opened 10 months ago by wauswaus
  3

• GPIO configuration for D1 Mini ESP32

  #65 opened a year ago by st1234b
  2

• Wrong units

  #62 opened a year ago by pyzimmer
  2

• Project direction and new features

  #46 opened 2 years ago by vekexasia
  21

• Missing send services

  #54 opened 2 years ago by poingZ
  1

• Wrong units of measure

  #44 opened 2 years ago by pyzimmer
  1

• Button for mqtt commands

  #45 opened 2 years ago by pyzimmer
  0

• Project finished

  #42 opened 2 years ago by Obelixje
  1

• Bootloop after flashing the ESPHome version

  #47 opened 2 years ago by SkullboyNL
  11

• Installation Instructions for ESPHOME

  #48 opened 2 years ago by marivo
  6

• Compilation problem [debuggingMode]

  #43 opened 2 years ago by SzymaneKwr
  1

• Project compilation problems

  #32 opened 2 years ago by MichalAug
  3

• Wrong variable type (uint16) for pre_heater_temp_before and post_heater_temp_after

  #39 opened 2 years ago by panosnl
  3

• How to connect

  #40 opened 2 years ago by Obelixje
  11

• Boost issue

  #38 opened 2 years ago by Obelixje
  1

• Dashboard request

  #34 opened 2 years ago by Obelixje
  0

• set_mode not working

  #36 opened 2 years ago by Obelixje
  1

• days_to_replace_filter

  #37 opened 2 years ago by quentindavid
  1

• No MQTT

  #35 opened 2 years ago by Obelixje
  10

• HA installation

  #30 opened 2 years ago by J1Buskens
  1

• Error uploading to ESP

  #29 opened 2 years ago by J1Buskens
  2