vermilion-bird/aiofile

Real asynchronous file operations with asyncio support.

AIOFile

Real asynchronous file operations with asyncio support.

Status

Development - Stable

Features

• Since version 2.0.0 using caio, is contain linux libaio and two thread-based implementations (c-based and pure-python).
• AIOFile has no internal pointer. You should pass offset and chunk_size for each operation or use helpers (Reader or Writer). The simples way is use async_open for create object with file-like interface.
• For Linux using implementation based on libaio.
• For POSIX (MacOS X and optional Linux) using implementation using on threadpool.
• Otherwise using pure-python thread-based implementation.
• Implementation chooses automatically depending on system compatibility.

Limitations

• Linux native AIO implementation not able to open special files. Asynchronous operations against special fs like /proc/ /sys/ not supported by the kernel. It's not a aiofile`s or `caio issue. To In this cases, you might switch to thread-based implementations (see troubleshooting section). However, when used on supported file systems, the linux implementation has a smaller overhead and preferred but it's not a silver bullet.

Code examples

All code examples requires python 3.6+.

High-level API

async_open helper

Helper mimics to python python file-like objects, it's returns file like object with similar but async methods.

Supported methods:

• async def read(length = -1) - reading chunk from file, when length is -1 will be read file to the end.

• async def write(data) - write chunk to file

• def seek(offset) - set file pointer position

• def tell() - returns current file pointer position

• async def readline(size=-1, newline="\n") - read chunks until newline or EOF. Since version 3.7.0 __aiter__ returns LineReader.

  This method suboptimal for small lines because doesn't reuse read buffer. When you want to read file by lines please avoid to use async_open use LineReader instead.

• def __aiter__() -> LineReader - iterator over lines.

• def iter_chunked(chunk_size: int = 32768) -> Reader - iterator over chunks.

• .file property contains AIOFile object

Basic example:

import asyncio
from pathlib import Path
from tempfile import gettempdir

from aiofile import async_open

tmp_filename = Path(gettempdir()) / "hello.txt"

async def main():
    async with async_open(tmp_filename, 'w+') as afp:
        await afp.write("Hello ")
        await afp.write("world")
        afp.seek(0)

        print(await afp.read())

        await afp.write("Hello from\nasync world")
        print(await afp.readline())
        print(await afp.readline())

loop = asyncio.get_event_loop()
loop.run_until_complete(main())

Concatenate example program (cat):

import asyncio
import sys
from argparse import ArgumentParser
from pathlib import Path

from aiofile import async_open

parser = ArgumentParser(
    description="Read files line by line using asynchronous io API"
)
parser.add_argument("file_name", nargs="+", type=Path)

async def main(arguments):
    for src in arguments.file_name:
        async with async_open(src, "r") as afp:
            async for line in afp:
                sys.stdout.write(line)


asyncio.run(main(parser.parse_args()))

Copy file example program (cp):

import asyncio
from argparse import ArgumentParser
from pathlib import Path

from aiofile import async_open

parser = ArgumentParser(
    description="Copying files using asynchronous io API"
)
parser.add_argument("source", type=Path)
parser.add_argument("dest", type=Path)
parser.add_argument("--chunk-size", type=int, default=65535)


async def main(arguments):
    async with async_open(arguments.source, "rb") as src, \
               async_open(arguments.dest, "wb") as dest:
        async for chunk in src.iter_chunked(arguments.chunk_size):
            await dest.write(chunk)


asyncio.run(main(parser.parse_args()))

Example with opening already opened file pointer:

import asyncio
from typing import IO, Any
from aiofile import async_open


async def main(fp: IO[Any]):
    async with async_open(fp) as afp:
        await afp.write("Hello from\nasync world")
        print(await afp.readline())


with open("test.txt", "w+") as fp:
    loop = asyncio.get_event_loop()
    loop.run_until_complete(main(fp))

Linux native aio doesn't support reading and writing special files (e.g. procfs/sysfs/unix pipes/etc.) so you can perform operations with this files using compatible context object.

import asyncio
from aiofile import async_open
from caio import thread_aio_asyncio
from contextlib import AsyncExitStack


async def main():
    async with AsyncExitStack() as stack:

        # Custom context should be reused
        ctx = await stack.enter_async_context(
            thread_aio_asyncio.AsyncioContext()
        )

        # Open special file with custom context
        src = await stack.enter_async_context(
            async_open("/proc/cpuinfo", "r", context=ctx)
        )

        # Open regular file with default context
        dest = await stack.enter_async_context(
            async_open("/tmp/cpuinfo", "w")
        )

        # Copying file content line by line
        async for line in src:
            await dest.write(line)


asyncio.run(main())

Reader and Writer

When you want to read or write file linearly following example might be helpful.

import asyncio
from aiofile import AIOFile, Reader, Writer


async def main():
    async with AIOFile("/tmp/hello.txt", 'w+') as afp:
        writer = Writer(afp)
        reader = Reader(afp, chunk_size=8)

        await writer("Hello")
        await writer(" ")
        await writer("World")
        await afp.fsync()

        async for chunk in reader:
            print(chunk)


loop = asyncio.get_event_loop()
loop.run_until_complete(main())

LineReader - read file line by line

LineReader is a helper that is very effective when you want to read a file linearly and line by line.

It contains a buffer and will read the fragments of the file chunk by chunk into the buffer, where it will try to find lines.

The default chunk size is 4KB.

import asyncio
from aiofile import AIOFile, LineReader, Writer


async def main():
    async with AIOFile("/tmp/hello.txt", 'w+') as afp:
        writer = Writer(afp)

        await writer("Hello")
        await writer(" ")
        await writer("World")
        await writer("\n")
        await writer("\n")
        await writer("From async world")
        await afp.fsync()

        async for line in LineReader(afp):
            print(line)


loop = asyncio.get_event_loop()
loop.run_until_complete(main())

When you want to read file by lines please avoid to use async_open use LineReader instead.

Low-level API

Following API is just little bit sugared caio API.

Write and Read

import asyncio
from aiofile import AIOFile


async def main():
    async with AIOFile("/tmp/hello.txt", 'w+') as afp:
        await afp.write("Hello ")
        await afp.write("world", offset=7)
        await afp.fsync()

        print(await afp.read())


loop = asyncio.get_event_loop()
loop.run_until_complete(main())

Read file line by line

import asyncio
from aiofile import AIOFile, LineReader, Writer


async def main():
    async with AIOFile("/tmp/hello.txt", 'w') as afp:
        writer = Writer(afp)

        for i in range(10):
            await writer("%d Hello World\n" % i)

        await writer("Tail-less string")


    async with AIOFile("/tmp/hello.txt", 'r') as afp:
        async for line in LineReader(afp):
            print(line[:-1])


loop = asyncio.get_event_loop()
loop.run_until_complete(main())

More examples

Useful examples with aiofile

Async CSV Dict Reader

import asyncio
import io
from csv import DictReader

from aiofile import AIOFile, LineReader


class AsyncDictReader:
    def __init__(self, afp, **kwargs):
        self.buffer = io.BytesIO()
        self.file_reader = LineReader(
            afp, line_sep=kwargs.pop('line_sep', '\n'),
            chunk_size=kwargs.pop('chunk_size', 4096),
            offset=kwargs.pop('offset', 0),
        )
        self.reader = DictReader(
            io.TextIOWrapper(
                self.buffer,
                encoding=kwargs.pop('encoding', 'utf-8'),
                errors=kwargs.pop('errors', 'replace'),
            ), **kwargs,
        )
        self.line_num = 0

    def __aiter__(self):
        return self

    async def __anext__(self):
        if self.line_num == 0:
            header = await self.file_reader.readline()
            self.buffer.write(header)

        line = await self.file_reader.readline()

        if not line:
            raise StopAsyncIteration

        self.buffer.write(line)
        self.buffer.seek(0)

        try:
            result = next(self.reader)
        except StopIteration as e:
            raise StopAsyncIteration from e

        self.buffer.seek(0)
        self.buffer.truncate(0)
        self.line_num = self.reader.line_num

        return result


async def main():
    async with AIOFile('sample.csv', 'rb') as afp:
        async for item in AsyncDictReader(afp):
            print(item)


loop = asyncio.new_event_loop()
asyncio.set_event_loop(loop)


try:
    loop.run_until_complete(main())
finally:
    # Shutting down and closing file descriptors after interrupt
    loop.run_until_complete(loop.shutdown_asyncgens())
    loop.close()

Troubleshooting

The caio linux implementation works normal for modern linux kernel versions and file systems. So you may have problems specific for your environment. It's not a bug and might be resolved some ways:

1. Upgrade the kernel
2. Use compatible file system
3. Use threads based or pure python implementation.

The caio since version 0.7.0 contains some ways to do this.

1. In runtime use the environment variable CAIO_IMPL with possible values:

• linux - use native linux kernels aio mechanism
• thread - use thread based implementation written in C
• python - use pure python implementation

2. File default_implementation located near __init__.py in caio installation path. It's useful for distros package maintainers. This file might contains comments (lines starts with # symbol) and the first line should be one of linux thread or python.

3. You might manually manage contexts:

import asyncio

from aiofile import async_open
from caio import linux_aio, thread_aio


async def main():
    linux_ctx = linux_aio.Context()
    threads_ctx = thread_aio.Context()

    async with async_open("/tmp/test.txt", "a", context=linux_ctx) as afp:
        await afp.write("Hello")

    async with async_open("/tmp/test.txt", "a", context=threads_ctx) as afp:
        print(await afp.read())


asyncio.run(main())