/osprey

Kubernetes OIDC CLI login

Primary LanguageGoBSD 3-Clause "New" or "Revised" LicenseBSD-3-Clause

Osprey

Client and service for providing access to Kubernetes clusters.

The client provides a user login command which will request a username and a password and forward them to the service. The service will forward the credentials to an OpenId Connect Provider (OIDC) to authenticate the user and will return a JWT token with the user details. The token along with some additional cluster information will be used to generate the kubectl configuration to be used to access Kubernetes clusters.

Supported OIDC providers

Dex

This implementation relies in one specific configuration detail of the OIDC provider SkipApprovalScreen : true which eliminates the intermediate step requiring a client to explicitly approve the requested grants before the token is provided. If the target provider does not support this feature, additional work is required to handle that approval.

Azure

When Azure is configured as the OIDC provider, the user login command will generate a link to visit, which the user must open in a browser in order to authenticate. Upon a successful login, the browser will send a request to a local endpoint served by the osprey application. With the information contained in this request it is able to request a JWT token on your behalf.

Quick links

Installation

Osprey is currently supported in linux, mac OS and windows and it can be installed as a standalone executable, or it can be run as a container (only linux). The docker container is aimed to be used for the server side, while the binaries main use are the client commands.

Binaries

Osprey's executable binaries can be downloaded from our Bintray repository.

To install a specific version replace <version> with the release version (e.g v9.9.0; mind the v prefix).

Linux and Mac OS

  curl -fsSL https://dl.bintray.com/sky-uk/oss-generic/osprey/<version>/osprey-<version>_linux_amd64.tar.gz -o osprey.tar.gz

  tar -xvf osprey.tar.gz -C $HOME/.local/bin
  chmod +x $HOME/.local/bin/osprey

$HOME/.local/bin should be in your $PATH, or replace it with one that better suits your setup.

To install for Mac OS replace linux for darwin

Windows

  mkdir c:\osprey
  Invoke-WebRequest -method Get -uri https://dl.bintray.com/sky-uk/oss-generic/osprey/<version>/osprey-<version>_windows_amd64.zip -OutFile c:\osprey\osprey.zip

  Unzip c:\osprey\osprey.zip c:\osprey

  $env:Path = "c:\osprey;" + $env:Path
  [Environment]::SetEnvironmentVariable( "Path", $env:Path, [System.EnvironmentVariableTarget]::Machine )

Docker

The docker image is based on alpine. It can be pulled from our Docker Hub repository

To pull a specific version replace <version> with the release version (e.g v9.9.0; mind the v prefix).

   docker pull skycirrus/osprey:<version>

Client

The osprey client will request the user credentials and generate a kubeconfig file based on the contents of its configuration.

To get the version of the binary use the root command:

$  osprey --version
osprey version dev-8c8751f (Tue 21 Aug 20:19:49 UTC 2018)

Client usage

With a configuration file like:

providers:
  osprey:
    targets:
      local.cluster:
        server: https://osprey.local.cluster
      foo.cluster:
        server: https://osprey.foo.cluster
        alias: [foo]
        groups: [foo, foobar]
      bar.cluster:
        server: https://osprey.bar.cluster
        groups: [bar, foobar]

The groups are labels that allow the targets to be organised into categories. They can be used, for example, to split non-production and production clusters into different groups, thus making the interaction explicit.

Most of the client commands accept a --group <value> flag which indicate osprey to execute the commands only against targets containing the specified value in their groups definition.

A default-group may be defined at the top of the configuration which will apply that group to any command if the --group flag is not used. When a default group exists all targets should belong to at least one group; otherwise the configuraiton will become invalid and an error will be displayed when running any command.

If no group is provided, and no default-group is defined, the operations will be performed against targets without group definitions.

Login

Requests a kubernetes access token for each of the configured targets and and creates the kubeconfig's cluster, user and context elements for them.

$ osprey user login
user: someone
password: ***
Logged in to local.cluster
  • Note: When using a cloud identity provider, a link to the respective online login form will be shown in the terminal. The user must click on this link and follow the login steps.

It will generate the kubeconfig file creating a cluster and user entry per osprey target and one context with the target name and as many extra contexts as aliases have been specified.

When specifying the --group flag, the operations will apply to the targets belonging to the specified group. If targeting a group (provided or default) the output will include the name of the group.

$ osprey user login --group foobar
user: someone
password: ***

Logging in to group 'foobar'

Logged in to foo.cluster | foo
Logged in to bar.cluster

At login, aliases are displayed after the pipes (i.e | foo)

User

Displays information about the currently logged in user (it shows the details even if the token has already expired). It contains the email of the logged in user and the list of LDAP membership groups the user is a part of. The latter come from the claims in the user's token.

$ osprey user --group foobar
foo.cluster: someone@email.com [membership A, membership B]
bar.cluster: someone@email.com [membership C]

If no user is logged in, osprey displays none instead of the user details.

Logout

Removes the token for the currently logged in user for every configured target.

$ osprey user logout --group foobar
Logged out from foo.cluster
Logged out from bar.cluster

If no user is logged in the command is a no-op.

Config

This command is currently a no-op, used only to group the commands related to the osprey configuration.

Targets

Displays the list of defined targets within the client configuration. It allows displaying the list of targets per group and to target a specific group via flags.

$  osprey config targets --by-groups
Configured targets:
* <ungrouped>
    local.cluster
  bar
    bar.cluster
  foo
    foo.cluster | foo
  foobar
    bar.cluster
    foo.cluster | foo

This command will display targets that do not belong to any group, if there are any, under the special group <ungrouped>.

If the configuration specifies a default group, it will be highlighted with a * before its name, e.g. * foobar. If no default group is defined the special <ungrouped> grouping will be highlighted.

Groups

The targets command flag --list-groups is useful to display only the list of existing groups within the configuration, without any target information.

$  osprey config targets --list-groups
Configured groups:
* <ungrouped>
  bar
  foo
  foobar

Client configuration

The client installation script gets the configuration supported by the installed version.

The client uses a yaml configuration file. It's recommended location is: $HOME/.osprey/config. Its contents are as follow:

# Optional path to the kubeconfig file to load/update when loging in.
# Uses kubectl defaults if absent ($HOME/.kube/config).
# kubeconfig: /home/jdoe/.kube/config

# Mandatory for windows, optional for unix systems.
# CA cert to use for HTTPS connections to osprey.
# Uses system's CA certs if absent (only in unix systems).
# certificate-authority: /tmp/osprey-238319279/cluster_ca.crt

# Alternatively, base64-encoded PEM format certificate.
# This will override certificate-authority if specified.
# Same caveat for Windows systems applies.
# certificate-authority-data: LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk5vdCB2YWxpZAotLS0tLUVORCBDRVJUSUZJQ0FURS0tLS0tCg==

# Optional group name to be the default for all commands that accept it.
# When this value is defined, all targets must define at least one group.
# default-group: my-group

# Named map of supported providers (currently `osprey` and `azure`)
providers:
  osprey:
    # Named map of target osprey servers to contact for access-tokens
    targets:
      # Target osprey's environment name.
      # Used for the name of the cluster, context, and users generated
      foo.cluster:
        # hostname:port of the target osprey server
        server: https://osprey.foo.cluster

        #  list of names to generate aditional contexts against the target.
        aliases: [foo.alias]

        #  list of names that can be used to logically group different osprey servers.
        groups: [foo]

        # Mandatory for windows, optional for unix systems.
        # CA cert to use for HTTPS connections to osprey.
        # Uses system's CA certs if absent (only in unix systems).
        # certificate-authority: /tmp/osprey-238319279/cluster_ca.crt

        # Alternatively, base64-encoded PEM format certificate.
        # This will override certificate-authority if specified.
        # Same caveat for Windows systems applies.
        # certificate-authority-data: LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk5vdCB2YWxpZAotLS0tLUVORCBDRVJUSUZJQ0FURS0tLS0tCg==

  # Authenticating against Azure AD
  azure:
    # These settings are required when authenticating against Azure
    tenant-id: your-azure-tenant-id
    server-application-id: azure-ad-server-application-id
    client-id: azure-ad-client-id
    client-secret: azure-ad-client-secret

    # List of scopes to request as part of the request. This should be an azure link to the API exposed on the server application
    scopes:
      - "api://azure-tenant-id/Kubernetes.API.All"

    # This is required for the browser based authentication flow. The port is configurable, but it must conform to
    # the format: http://localhost:<port>/auth/callback
    redirect-uri: http://localhost:65525/auth/callback
    targets:
      foo.cluster:
        server: http://osprey.foo.cluster
        aliases: [foo.alias]
        groups: [foo]

The name of the configured targets will be used to name the managed clusters, contexts, and user. They can be setup as desired. Use the aliases property of the targets to create alias contexts in the kubeconfig.

The previous configuration will result in the following kubeconfig file for the user jdoe:

osprey user login --ospreyconfig /tmp/osprey-238319279/.osprey/config

apiVersion: v1
clusters:
- cluster:
    certificate-authority-data: YUhSMGNITTZMeTloY0dselpYSjJaWEl1YzJGdVpHSnZlQzVqYjNOdGFXTXVjMnQ1
    server: https://apiserver.foo.cluster
  name: foo.cluster
contexts:
- context:
    cluster: foo.cluster
    user: foo.cluster
  name: foo.cluster
- context:
    cluster: foo.cluster
    user: foo.cluster
  name: foo.alias
current-context: ""
kind: Config
preferences: {}
users:
- name: foo.cluster
  user:
    auth-provider:
      config:
        client-id: oidc_client_id
        client-secret: oidc_client_secret
        id-token: jdoe_Token
        idp-certificate-authority-data: aHR0cHM6Ly9kZXguc2FuZGJveC5jb3NtaWMuc2t5
        idp-issuer-url: https://dex.foo.cluster
      name: oidc

The client will create/update one instance of cluster, context, and user in the kubeconfig file per target in the ospreyconfig file. We use client-go's config api to manipulate the kubeconfig.

If previous contexts exist in the kubectl config file, they will get updated/overriden when performing a login. It overrides values by name (e.g. cluster.name, context.name, user.name). It is recommended that the first time using the osprey for a specific cluster old values are removed, to keep the config clean.

The names of clusters, user and context will use the value defined in the osprey config.

Server

The Osprey server can be started in two different ways:

  • osprey serve cluster-info
  • osprey serve auth

osprey serve cluster-info

Starts an instance of the osprey serve that will create a webserver that is capable of returning cluster information. In this mode, authentication is disabled. This endpoint is used for service discovery for an osprey target.

This endpoint (/cluster-info) will return the api-server URL and the CA for the api-server.

In this mode, the required flags are:

  • apiServerCA, the path to the api-server CA (defaults to /var/run/secrets/kubernetes.io/serviceaccount/ca.crt) which is the default location of the CA when running inside a kubernetes cluster.
  • apiServerURL, the api-server URL to return to the osprey client

osprey serve auth

Starts an instance of the osprey server that will listen for authentication requests. The configuration is done through the commands flags. The Osprey service will receive the user's credentials and forward them to the OIDC provider (Dex) for authentication. On success it will return the token generated by the provider along with additional information about the cluster so that the client can generate the kubectl config file.

    osprey serve auth --help

When Osprey is being used for authentication, the following flags require to be the same across the specified components:

  • environment, id of the cluster to be used as a client id
    • Dex: registered client id (managed via the Dex api or staticClients)
    • Kubernetes apiserver: oidc-client-id flag
  • secret, token to be shared between Dex and Osprey
    • Dex: registered client secret (managed via the Dex api or staticClients)
  • redirectURL, Osprey's callback url
    • Dex: registered client redirectURIs (managed via the Dex api or staticClients)
  • issuerURL, Dex's URL
    • Dex: issuer value
    • Kubernetes apiserver: oidc-issuer-url flag
  • issuerCA, Dex's CA certificate path
    • Kubernetes apiserver: oidc-ca-file flag

The following diagram depicts the authentication flow from the moment the osprey client requests a token.

                                       +------------------------+
                                       |                        |
                                       |      +----------------------------+
                                       |      |                 |          |
+------------------+                   |  +---v--------------+  |          |
|                  | 1./access-token   |  |                  |  |          |
|  Osprey Client   +---------------------->   Osprey Server  +-----+       |
|                  |                   |  |                  |  |  |       |
+------------------+                   |  +--+--------+------+  |  |       |
                                       |     |        |         |  |       |
                                       |     |        |         |  |       |
                                       |     | 2.     | 3.      |  |       |
                                       |     |/auth   |/login   |  |6. code|exchange
                                       |     |        |         |  |       |
                                       |     |        |         |  |       |
+------------------+                   |  +--v--------v------+  |  |       |
|                  |                   |  |                  |  |  |       |
|       LDAP       | 4. authenticate   |  |       Dex        <-----+       |
|                  <----------------------+                  +-------------+
+------------------+                   |  +------------------+  |  5. /callback
                                       |                        |
                                       |      Environment       |
                                       +------------------------+

After the user enters its credentials through the Osprey Client:

  1. An HTTPS call is made to an Osprey Server per environment configured.
  2. Per environment:
    1. The Osprey Server will make an authentication request to Dex which will will return an authentication url to use and a request ID.
    2. The Osprey Server will post the user credentials using the auth request details.
    3. Dex will call LDAP to validate the user.
    4. Upon a successful validation, Dex will redirect the request to the Osprey Server's callback url, with a generated code and the request ID.
    5. The Osprey Server will exchange the code with Dex to get the final token that is then returned to the client.
    6. The Osprey Client updates the kubeconfig file with the updated token.

TLS

Because the Osprey client sends the users credentials to the server, the communication must always be done securely. The Osprey server has to run using HTTPS, so a certificate and a key must be generated and provided at startup. The client must be configured with the CA used to sign the certificate in order to be able to communicate with the server.

A script to generate a test self signed certificate, key and CA can be found in the examples

Dex templates and static content

By default Dex searches for web resources in a web folder located in the same directory where the server is started. This location can be overridden in Dex's configuration:

...
frontend:
  dir: /path/to/the/templates
  theme: osprey
...

Dex also requires a web/static folder and a web/themes/<theme> folder for static content. Osprey does not require any of these, but the folders are required to be there, even if empty.

Because the authentication flow does not involve the user, the data exchanged between Dex and Osprey must be in json so the html templates need to be customized.

A folder with the required configuration for Osprey can be taken from out test setup. The only theme is osprey and it is empty. All the templates file are required to be present, but not all of them are used in the authentication flow.

Identity Provider

Osprey doesn't currently support Dex using multiple Identity Providers as the user would be required to select one of them (login.html) before proceeding to the authentication request.

Therefore currently only one Identity Provider can be configured.

Token expiry and Refresh token

Dex allows for configuration of the token expiry, and it also provides a refresh token, so that a client can request a new token without the need of user interaction.

The current usage of osprey is such that it was decided to discard the refresh token, to prevent a compromised token to be active for more than a configured amount of time. If the need arises, this could be reintroduced and enabled/disabled by configuration.

Apiserver

The Kubernetes apiserver needs to enable the OIDC Authentication in order for the kubectl requests to be authenticated and then authorised.

Some of those flags have been mentioned in the configuration.

Examples

Download and install the Osprey binaries so that the client can be used for the examples.

Kubernetes

A set of examples resources has been provided to create the required resources to deploy Dex and Osprey to a kubernetes cluster. The templates can be found in examples/kubernetes.

  1. Provide the required properties in examples/kubernetes/kubernetes.properties:

    • node, the script uses a NodePort service, so in order to configure the osprey and dex to talk to each other, a node ip from the target cluster must be provided. A list of ips to chose from can be obtained via: 
      kubectl --context <context> get nodes -o template --template='{{range.items}}{{range.status.addresses}}{{if eq .type "InternalIP"}}  {{.address}}:{{end}}{{end}}{{end}}' | tr ":" "\n"
    • context, the script uses kubectl to apply the resources and for this it needs a context to target.
    • ospreyNodePort, dexNodePort, dexTelemetryNodePort, the ports where Osprey and Dex (service and metrics) will be available across the cluster. A default value is provided, but if the ports are already in use, they must be changed.
    • ospreyImage, if you want to try a different version for the server.

  2. Run the shell script to render the templates and to to deploy the resources to the specified cluster.

    examples/kubernetes/deploy-all.sh </full/path/to/runtime/dir>

    To create an osprey-server that serves /cluster-info only, set ospreyAuthenticationDisabled=true in the properties file.

  3. Use the osprey client

    osprey --ospreyconfig </full/path/to/runtime/dir/>osprey/ospreyconfig --help

More properties are available to customize the resources at will.

Local docker containers

Although the Osprey solution is intended to be run in a Kubernetes cluster, with the OIDC Authentication enabled, it is possible to have a local instance of Osprey and Dex to try out and validate a specific configuration.

A set of scripts have been provided to start an end to end run of a user logging in, checking details and logging out.

From the root of the project:

   mkdir /tmp/osprey_local
   examples/local/end-to-end.sh /tmp/osprey_local

The end-to-end.sh script will:

  1. Start a Dex server (start-dex.sh)
  2. Start an Osprey server (start-osprey.sh)
  3. Execute the osprey user login command. It will request credentials, use user/pass: "jane@foo.cluster/doe", "john@foo.cluster/doe"
  4. Execute the osprey user command
  5. Execute the osprey user logout command
  6. Execute the osprey user command
  7. Shutdown Osprey and Dex

You can also start Dex and Osprey manually with the scripts and play with the osprey client yourself.

The scripts use templates for the Dex configuration and the Osprey client configuration. The scripts load a properties file to render the templates.

Development

First install the required dependencies:

  • make setup - installs required golang binaries
  • slapd, usually part of the openldap package - needed for end to end tests

Then run the tests using make:

make

Package structure

  • /cmd contains the cobra commands to start a server or a client.
  • /client contains code for the osprey cli client.
  • /server contains code for the osprey server.
  • /common contains code common to both client and server.
  • /e2e contains the end to end tests, and test utils for dependencies.
  • /examples contains scripts to start Dex and Osprey in a Kubernetes clusters or locally.
  • vendor contains the dependencies of the project.

Server and client

We use cobra, to generate the client and server commands.

E2E tests

The e2e tests are executed against local Dex and ldap servers.

The setup is as follows:

Osprey Client (1) -> () Osprey Server (1) -> (1) Dex () -> (1) LDAP

Each pair of osprey server-Dex represents an environment (cluster) setup. One osprey client contacts as many osprey-servers as configured in the test setup. Each osprey server will talk to only one Dex instance located in the same environment. All Dex instances from the different environments will talk to the single LDAP instance.

For cloud end to end tests, a mocked OIDC server is created and used to authenticate with.

HTTPS/ProtocolBuffers

Given that aws ELB's do not support HTTP/2 osprey needs to run over HTTP. We still use ProtocolBuffers for the requests and responses between osprey and its client.

Any changes made to the proto files should be backwards compatible. This guarantees older clients can continue to work against osprey, and we don't need to worry about updates to older clients.

To update, update common/pb/osprey.proto then run protoc.

make proto

Check in the osprey.pb.go file afterwards.

Azure Active Directory setup

The Azure AD Application setup requires two applications to be created. One for the Kubernetes api-servers to use, and one for the Osprey client to use. The Osprey client is then configured to request access on behalf of the Kubernetes OIDC provider.

Create Osprey Kubernetes Application

  1. Visit https://portal.azure.com/#blade/Microsoft_AAD_IAM/ActiveDirectoryMenuBlade/Overview and log in using your organisations credentials.
  2. Select 'App Registrations' from the side-bar and click '+ New registration' on the top menu bar.
  3. Create an application with the following details:
    • Name: "Osprey - Kubernetes API Server"
    • Supported account types: "Accounts in this organizational directory only"
  4. Select 'API permissions' from the side-bar and click '+ Add a permission' Add the following permissions:
    • Microsoft Graph -> Delegated permissions -> Enable access to "email", "openid" and "profile"
    • Click 'Add permissions' to save.
  5. Select 'Expose an API' from the side-bar and click '+ Add a scope'
  6. Create a scope with an appropriate/descriptive name. e.g. Kubernetes.API.All. The details in this form are what are shown to users when they first authorize the application to log in on their behalf.
  7. Select 'Manifest' from the side-bar and find the field 'groupMembershipClaims' in the JSON. Change this so that it's value is "groupMembershipClaims": "All", and not "groupMembershipClaims": null,
  8. The server client-id is the Object ID of this application. This can be found in the Overview panel.

Create Osprey Client Application

  1. Visit https://portal.azure.com/#blade/Microsoft_AAD_IAM/ActiveDirectoryMenuBlade/Overview and log in using your organisations credentials.
  2. Select 'App Registrations' from the side-bar and click '+ New registration' on the top menu bar.
  3. Create an application with the following details:
    • Name: "Osprey - Client"
    • Supported account types: "Accounts in this organizational directory only"
    • RedirectURI:
      • Type: Web RedirectURI: This is a redirect URI that must be configured to match in both the Azure application config and the Osprey config. It has to be in the http://localhost:<port>/<path> format. This will be the port that Osprey client opens up a webserver on, to listen to callbacks from the login page. We use http://localhost:65525/auth/callback in the example configuration.
  4. Select 'API permissions' from the side-bar and click '+ Add a permission' Add the following permissions:
    • Microsoft Graph -> Delegated permissions -> Enable access to "openid"
    • Click 'Add permissions' to save.
  5. Click '+ Add a permission' and select 'My APIs' from the top of the pop-out menu.
    • Select the "Osprey - Kubernetes API Server"
    • Click 'Add permissions' to save.
  6. Select 'Certificates & secrets' from the side-bar and click '+ New client secret'
    • Choose an expiry for this secret. When a token expires, the osprey client config must be updated to include this as the 'client-secret'. Copy this secret as soon as it is created, as it will be hidden when you leave the azure pane.
  7. The osprey client-id is the Object ID of this application. This can be found in the Overview panel.

The client ID and secrets generated in this section are used to fill out the osprey config file.

providers:
  azure:
    tenant-id: your-tenant-id
    server-application-id: api://SERVER-APPLICATION-ID   # Application ID of the "Osprey - Kubernetes APIserver"
    client-id: azure-application-client-id               # Client ID for the "Osprey - Client" application
    client-secret: azure-application-client-secret       # Client Secret for the "Osprey - Client" application
    scopes:
    # This must be in the format "api://" due to non-interactive logins appending this to the audience in the JWT.
      - "api://SERVER-APPLICATION-ID/Kubernetes.API.All"
    redirect-uri: http://localhost:65525/auth/callback   # Redirect URI configured for the "Osprey - Client" application

Kubernetes api-server flags:

- --oidc-issuer-url=https://sts.windows.net/<tenant-id>/
- --oidc-client-id=api://9bd903fd-f8df-4390-9a45-ab2fa28673b4
- --oidc-username-claim=unique_name
- --oidc-groups-claim=groups

Dependency management

Dependencies are managed with go modules. Run go mod download to download all dependencies.

Make sure any kubernetes dependencies are compatible with the kubernetes-1.8.5

Releasing

Tag the commit in master using an annotated tag and push it to release it. Only maintainers can do this.

Osprey gets released to:

  • Bintray as binaries for the supported platforms.
  • Docker-Hub as an alpine based docker image.

Code guidelines

  • Follow Effective Go.