Stealthburner Toolhead support for TapSensor is too weak

Question

Stealthburner Toolhead support for TapSensor is too weak

orotecluc opened this issue 8 months ago · 7 comments

Hi,
Iam trying the StealthBurner Square Rods version of Tapchanger/STL/Toolheads/Stealthburner.
But everytime, the mount to where Ihave to put the Tap Sensor, breaks off.
Since I have no Fusion360 experience at all, wouldn't it be possible to give it a more sturdy top wall, in line with the mount on the Voron-Tap?
I know, on Voron Tap, the stup is completly different, with a seperate peace to mount the sensor, and heavy side walls on both sides of the sensor, to make the mount more sturdy, but I think, with a thicker top layer on mount piece, we can have already a good result.
I tried doing a mockup in Tinkercad :

https://i.imgur.com/PHsDbpf.png
[https://i.imgur.com/Zt0iHWP.png](full view)
I know my 3D drawing skills are close to none

Answer 1 · 2024-02-19T09:02:57.000Z

Can you add a picture how exactly it breaks off? Does it break during assembly? Or when printing?

…

On Mon, Feb 19, 2024, 08:06 orotecluc ***@***.***> wrote: Hi, Iam trying the StealthBurner Square Rods version of Tapchanger/STL/Toolheads/Stealthburner. But everytime, the mount to where Ihave to put the Tap Sensor, breaks off. Since I have no Fusion360 experience at all, wouldn't it be possible to give it a more sturdy top wall, in line with the mount on the Voron-Tap? I know, on Voron Tap, the stup is completly different, with a seperate peace to mount the sensor, and heavy side walls on both sides of the sensor, to make the mount more sturdy, but I think, with a thicker top layer on mount piece, we can have already a good result. — Reply to this email directly, view it on GitHub <#27>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAMQT4Y4K3NVFSMBB65P3WLYUL2YHAVCNFSM6AAAAABDO5H37SVHI2DSMVQWIX3LMV43ASLTON2WKOZSGE2DCNRWGM4DGMY> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Answer 2 · 2024-02-19T09:28:41.000Z

It breaks OFF during assembly. https://i.imgur.com/OW3rEFs.jpg

Answer 3 · 2024-02-19T13:01:11.000Z

The bridge detaches rally easaly, but i thank, if we kake the backpart of that bridge stronger, Luke in my tinkercatd try, everything Will keep hold

Answer 4 · 2024-02-19T18:16:40.000Z

Thanks, making a more robust version...

Answer 5 · 2024-02-19T18:24:14.000Z

There, added 2 mm of plastic, let me know if this works.

Answer 6 · 2024-02-19T20:26:55.000Z

sorry, late out this evening. Testprinting right now.
Thanks for the fast response

Answer 7 · 2024-02-20T17:49:12.000Z

Prints are great now, mounted complete Square-rod-toolhead. Just had some issues mounting the TAP sensor, BHCS6mm are a bit too long, it seems, and screw holes are really narrow. Double magnets are a great upgrade.