Flying Stone Tiny 01 (FST-01G) PCB Design
Version 2.00
2016-09-XX
Niibe Yutaka
Flying Stone Technology
What's FST-01?
==============
Flying Stone Tiny 01 (FST-01) is a USB 32-bit computer by STM32
processor. It has minimalist design. MCU running at 72MHz, SPI flash
memory, SWD port for main flash ROM update, and two I/O pins.
That's all.
This is designed mainly for our own projects: Gnuk, NeuG, and Gone.
FST-01G is another revision, because KiCAD has been changed and I changed
LDO regulator.
These files are for what?
=========================
This is FST-01 PCB design for KiCAD.
I am using kicad of 4.0.2+dfsg1-4 in Debian.
Files
=====
README: This file
ChangeLog: History of this project
fst-01.pro: Project file of KiCAD
fst-01.sch: Schematic
fst-01.net: Netlist
fst-01.stf: Component and Module
fst-01.kicad_pcb: PCB design
library: schematic library
module.pretty: footprint modules for PCB
datasheet: Datasheets of parts
Note that files under datasheet directory is copyrighted by vendors.
Terms and conditions
====================
FST-01 is my work, but I am not sure how and what I can demand for
users. I think that PCB design and files can be copyrighted.
I assume that users don't use verbatim copy of this design. It
includes my trade marks of "FST-01G" and Flying Stone logo. Please
just don't include silk bottom layer, if you build your own PCB.
I would like to ask users to keep the design as "Open Hardware". See
the page for the definition of "Open Hardware":
http://www.opencollector.org/Whyfree/open_hardware.html
That is, interface, design itself, and tools for the design should be
free. Tools should be Free Software, in my opinion. It is not enough
if tools are available by download with no cost. Source code of tools
should be available and modification can be permitted.
Nevertheless, schematic design is distributed under Creative Commons
Attribution 3.0 Unported License (CC BY 3.0). See:
http://creativecommons.org/licenses/by/3.0/
Schematic design can be used for any purpose and you don't need to
open your modifications to my design.
For PCB, it is distributed under Creative Commons
Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0). See:
http://creativecommons.org/licenses/by-sa/3.0/
External modules
================
For module/SMT_CAP.mod and module/SMT_RES.mod, module drawings are
copied from w_smd_cap.mod and w_smd_resistors.mod by W.Lain. Files
are available at:
http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm
Its copyright notice is like following:
---------------------------------------------------------------------
Kicad Library by W. Lain - kcswalter@member.fsf.org
This library is released under the terms of the Creative Commons
license v3.0, Attribution-Share Alike.
The author holds no responsibility for any damage that can be caused
by the usage of this library. You are however welcome to report any
error or discrepance to the author, provided that you give also the
correct information and its source (i.e. the correct datasheet).
Note that the author used publicly available data sheets from many
different companies, and that package dimensions, pin numeration and
schematic symbols may vary slightly between companies.
---------------------------------------------------------------------
--