place and Route failed

Question

place and Route failed

Opened this issue 2 years ago · 4 comments

All the Paths are Set But Facing this Issue

[ERROR ORD-0047] You can't load a new db file as the db is already populated
Error: fillcell.tcl, 12 ORD-0047
Command exited with non-zero status 1
Elapsed time: 0:00.35[h:]min:sec. CPU time: user 0.30 sys 0.03 (95%). Peak memory: 102080KB.
make[1]: *** [Makefile:464: /home/vinayreddy/Desktop/mspdr/openfasoc/openfasoc/generators/PLL-gen/flow/results/sky130hd/PLL//4_2_cts_fillcell.odb] Error 1
make[1]: Leaving directory '/home/vinayreddy/Desktop/mspdr/openfasoc/openfasoc/generators/PLL-gen/flow'
[Error] Place and route failed. Refer to the log file
make: *** [Makefile:11: sky130hd_pll] Error 1

Answer 1 · 2023-03-05T14:14:16.000Z

Trying doing a 'make clean' first before you run the main make command

Answer 2 · 2023-03-05T16:57:41.000Z

Yes I Did But Still same issue Prevails

Answer 3 · 2023-03-06T13:43:42.000Z

Can you upload an issue reproducible to understand the issue better.

Answer 4 · 2023-03-06T13:45:25.000Z

This error shouldn't be produced unless you have made any changes after cloning the repo. Trying recloning and running once again. If the error persists please upload the issue reproducible.