/ring-hassio

A Home Assistant add-on for live streaming from Ring devices.

Primary LanguageJavaScriptMIT LicenseMIT

ring-hassio

Support the author on Patreon

Archived

This repo has been archived - please consider forking to continue development.

About

A Home Assistant add-on to enable live streams of Ring Cameras. This add-on wraps around Dgreif's excellent work and exposes a livestream.

DOT NOT run this add-on with 24-hour streaming - use this addon by starting it on-demand

Installation

  1. Add this GitHub repository to your supervisor (not HACS) add-on store.
  2. Configure your Ring Refresh Token and port (see configuration below).
  3. Start the "Ring Livestream" add-on. Check for errors in the logs.
  4. For remote access, open up the port in your router.
  5. Open the stream at http://homeassistant.local:port/public/stream.m3u8 to make sure it works before going any further. We recommend using VLC or equivalent.
  6. Add a camera to Home Assistant, such as:
    camera:
      - platform: generic
        name: Ring Livestream
        stream_source: http://homeassistant.local:port/public/stream.m3u8
        still_image_url: http://homeassistant.local:port/public/stream.m3u8
    (Don't worry about the still_image_url not pointing to an actual image, we are not going to use it, but it is required.)
  7. Add a card Picture Glance card to your UI, set the 'Camera Entity` to the camera you have just created.
  8. Done! Enjoy your shiny new livestream!

Configuration

Example configuration:

ring_refresh_token: your_refresh_token
camera_name: Front Door
  • You need to create a refresh token - see https://github.com/dgreif/ring/wiki/Refresh-Tokens on how to do that. Note that you will have to have node and npm installed on your machine.
  • The camera name is the name entred when setting up the camera in the Ring app.

Taking a snapshot

Currently the addon does not support taking snapshots, but when it does this is the configuration you will need: In order to use the snapshot service, you will need to following settings in your configuration.yaml:

homeassistant:
  whitelist_external_dirs:
    - /config/tmp

You can then call the snapshot service like this:

service: camera.snapshot
entity_id: [entityID]
filename: tmp/foo.jpg

Some users reported success to create a snapshot using:

  - platform: ffmpeg
    input: http://hassio.local:port/public/stream.m3u8

Battery conservation

A workaround to start/stop streaming (and avoid quick discharge) in Hassio is to start the addon on demand. To do this set up a sensor and switch:

sensor:
  - platform: rest
    resource: "http://hassio.local:port/api/hassio/addons/xxxxxxxx_ringlivestream/info"
    headers:
      Authorization: "Bearer [Long_Lived_Access_Token]"
      Content-Type: application/json
    name: ring_addon_state
    value_template: "{{value_json['data']['state']}}" 
 
switch:
  - platform: template
    switches:
      ring_live_stream:
        value_template: "{{ is_state('sensor.ring_addon_state', 'started') }}"
        turn_on:
          service: hassio.addon_start
          data:
            addon: xxxxxxxx_ringlivestream
        turn_off:
          service: hassio.addon_stop
          data:
            addon: xxxxxxxx_ringlivestream
  • for the sensor you will need the URL of the Info page on the Ring Livestream add-on page.
  • a [Long_Lived_Access_Token] can be generated on your profile page in Home Assistant (https://hassio.local:port/profile), scroll all the way to the bottom.
  • To get the 8 chars code "xxxxxxxx_ringlivestream" get them from the same URL.