vishnu350/rs-mainspring-winder

Issues

• Barrel walls for 17.5mm-18.5mm too thin

  #12 opened 9 months ago by vishnu350
  1

• Retire the barrel bowl and insert the arbor hole in setter bowl instead

  #8 opened 2 years ago by vishnu350
  2

• Missing M3 arbor rod sizes for large winder set

  #4 opened 2 years ago by vishnu350
  1

• Missing M1.5 arbor rod sizes for small winder set

  #5 opened 2 years ago by vishnu350
  1

• Vintage circular coil type mainsprings will not easily fit in some smaller winders

  #3 opened 2 years ago by vishnu350
  2

• Bowl deepness is still an issue in v0.9

  #15 opened 2 years ago by vishnu350
  1

• The winder size text never prints out cleanly

  #10 opened 2 years ago by vishnu350
  2

• Option to generate 3mf files

  #14 opened 2 years ago by vishnu350
  1

• Fillets too small in some parts, causing elephants foot

  #11 opened 2 years ago by vishnu350
  1

• Housing depth too deep?

  #13 opened 2 years ago by jhaals
  6

• Spring diameter shrink % parameter may not be needed?

  #9 opened 2 years ago by vishnu350
  2

• Retire the winder base with 3D printed arbor rod

  #7 opened 2 years ago by vishnu350
  1

• Modify Large Mainspring Winder

  #1 opened 2 years ago by walterp1982
  1