Welcome to PowerDale
PowerDale is a small town with around 100 residents. Most houses have a smart meter installed that can save and send information about how much power a house is drawing/using.
There are three major providers of energy in town that charge different amounts for the power they supply.
- Dr Evil's Dark Energy
- The Green Eco
- Power for Everyone
Introducing JOI Energy
JOI Energy is a new start-up in the energy industry. Rather than selling energy they want to differentiate themselves from the market by recording their customers' energy usage from their smart meters and recommending the best supplier to meet their needs.
You have been placed into their development team, whose current goal is to produce an API which their customers and smart meters will interact with.
Unfortunately, two members of the team are on annual leave, and another one has called in sick! You are left with another ThoughtWorker to progress with the current user stories on the story wall. This is your chance to make an impact on the business, improve the code base and deliver value.
Story Wall
At JOI energy the development team use a story wall or Kanban board to keep track of features or "stories" as they are worked on.
The wall you will be working from today has 7 columns:
- Backlog
- Ready for Dev
- In Dev
- Ready for Testing
- In Testing
- Ready for sign off
- Done
Examples can be found here https://leankit.com/learn/kanban/kanban-board/
Users
To trial the new JOI software 5 people from the JOI accounts team have agreed to test the service and share their energy data.
User | Smart Meter ID | Power Supplier |
---|---|---|
Sarah | smart-meter-0 |
Dr Evil's Dark Energy |
Peter | smart-meter-1 |
The Green Eco |
Charlie | smart-meter-2 |
Dr Evil's Dark Energy |
Andrea | smart-meter-3 |
Power for Everyone |
Alex | smart-meter-4 |
The Green Eco |
These values are used in the code and in the following examples too.
Requirements
The project requires Python 3.7 or higher and the PIP package manager.
Useful Python commands
Installation
Install the project dependencies
$ python3.7 -m pip install --requirement requirements.txt
Run the tests
Run all tests
$ python3.7 -m unittest
Run the application
Run the application which will be listening on port 5000
.
$ python3.7 src/app.py
API
Below is a list of API endpoints with their respective input and output. Please note that the application needs to be running for the following endpoints to work. For more information about how to run the application, please refer to run the application section above.
Store Readings
Endpoint
POST /readings/store
Example of body
{
"smartMeterId": <smartMeterId>,
"electricityReadings": [
{
"time": <timestamp>,
"reading": <reading>
}
]
}
Parameters
Parameter | Description |
---|---|
smartMeterId |
One of the smart meters' id listed above |
time |
The date/time (as epoch) when the reading was taken |
reading |
The consumption in kW at the time of the reading |
Example readings
Date (GMT ) |
Epoch timestamp | Reading (kW ) |
---|---|---|
2020-11-29 8:00 |
1606636800 | 0.0503 |
2020-11-29 8:01 |
1606636860 | 0.0621 |
2020-11-29 8:02 |
1606636920 | 0.0222 |
2020-11-29 8:03 |
1606636980 | 0.0423 |
2020-11-29 8:04 |
1606637040 | 0.0191 |
In the above example, the smart meter sampled readings, in kW
, every minute. Note that the reading is in kW
and
not kWH
, which means that each reading represents the consumption at the reading time. If no power is being consumed
at the time of reading, then the reading value will be 0
. Given that 0
may introduce new challenges, we can assume
that there is always some consumption, and we will never have a 0
reading value. These readings are then sent by the
smart meter to the application using REST. There is a service in the application that calculates the kWH
from these
readings.
The following POST request, is an example request using CURL, sends the readings shown in the table above.
$ curl \
-X POST \
-H "Content-Type: application/json" \
"http://localhost:5000/readings/store" \
-d '{"smartMeterId":"smart-meter-0","electricityReadings":[{"time":1606636800,"reading":0.0503},{"time":1606636860,"reading":0.0621},{"time":1606636920,"reading":0.0222},{"time":1606636980,"reading":0.0423},{"time":1606637040,"reading":0.0191}]}'
The above command will return the submitted readings.
{
"electricityReadings": [
{
"reading": 0.0503,
"time": 1606636800
},
{
"reading": 0.0621,
"time": 1606636860
},
{
"reading": 0.0222,
"time": 1606636920
},
{
"reading": 0.0423,
"time": 1606636980
},
{
"reading": 0.0191,
"time": 1606637040
}
],
"smartMeterId": "smart-meter-0"
}
Get Stored Readings
Endpoint
GET /readings/read/<smartMeterId>
Parameters
Parameter | Description |
---|---|
smartMeterId |
One of the smart meters' id listed above |
Retrieving readings using CURL
$ curl "http://localhost:5000/readings/read/smart-meter-0"
Example output
[
{
"reading": 0.0503,
"time": 1606636800
},
{
"reading": 0.0621,
"time": 1606636860
},
{
"reading": 0.0222,
"time": 1606636920
},
{
"reading": 0.0423,
"time": 1606636980
},
{
"reading": 0.0191,
"time": 1606637040
},
{
"reading": 0.988,
"time": 989707945
},
{
"reading": 0.402,
"time": 992419009
},
{
"reading": 0.785,
"time": 1006196973
},
{
"reading": 0.327,
"time": 989837737
},
{
"reading": 0.485,
"time": 1003722501
}
]
View Current Price Plan and Compare Usage Cost Against all Price Plans
Endpoint
GET /price-plans/compare-all/<smartMeterId>
Parameters
Parameter | Description |
---|---|
smartMeterId |
One of the smart meters' id listed above |
Retrieving readings using CURL
$ curl "http://localhost:5000/price-plans/compare-all/smart-meter-0"
Example output
{
"pricePlanComparisons": [
{
"price-plan-2": 1.8573933524727018e-06
},
{
"price-plan-1": 3.7147867049454036e-06
},
{
"price-plan-0": 1.8573933524727016e-05
}
],
"pricePlanId": "price-plan-0"
}
View Recommended Price Plans for Usage
Endpoint
GET /price-plans/recommend/<smartMeterId>[?limit=<limit>]
Parameters
Parameter | Description |
---|---|
smartMeterId |
One of the smart meters' id listed above |
limit |
(Optional) limit the number of plans to be displayed |
Retrieving readings using CURL
$ curl "http://localhost:5000/price-plans/recommend/smart-meter-0?limit=2"
Example output
[
{
"price-plan-2": 1.8573933524727018e-06
},
{
"price-plan-1": 3.7147867049454036e-06
}
]