vlkv/avalanche

Issues

• Split Communication Issues

  #22 opened a year ago by m-reiner
  2

• v4.2 compatible QMK firmware

  #23 opened a year ago by filoxo
  1

• 60% 3D printed case link issue

  #21 opened 2 years ago by waboni1
  1

• [v4.2] Shorting the SW34 pads for the OLED causes a short on the Pro Micro

  #20 opened 2 years ago by cam443
  0

• V4/V4.2 firmware missing?

  #19 opened 2 years ago by JJoe21
  0

• Is 4.2 released? or is the README up to date that still recommends to wait?

  #18 opened 3 years ago by maxhbr
  3

• Differences between v3 and v4

  #12 opened 3 years ago by DLopezGo90
  4

• v4.2 JLCPCB Order

  #13 opened 3 years ago by winder
  6

• GND shortened to RST in Avalanche 4.0 and 4.1

  #10 opened 3 years ago by vlkv
  0

• Change the OLED pins order in Avalanche 4.0 and 4.1

  #11 opened 3 years ago by vlkv
  0

• Per-key LED footprint is incorrect

  #8 opened 3 years ago by vlkv
  0

• Problems after breaking-off the numbers row

  #9 opened 3 years ago by vlkv
  0

• Top plate holes for switches are rather hard to break off

  #4 opened 3 years ago by vlkv
  1

• Create design for ProMicro cover plate

  #7 opened 3 years ago by vlkv
  1

• Mount top plate with bottom plate with standoffs?..

  #5 opened 4 years ago by vlkv
  1

• Change footprints for backlight LEDs

  #6 opened 4 years ago by vlkv
  2

• Bigger footprint for R1, R2 resistors

  #3 opened 4 years ago by vlkv
  1

• Move TRRS up

  #1 opened 4 years ago by vlkv
  1

• Move ProMicro up

  #2 opened 4 years ago by vlkv
  1