/esphome_c1101_alt

Primary LanguageC++

!!Work in progress!!

This is an alternative to https://github.com/CoMPaTech/esphome_c1101 which should handle most things within ESPhome instead of offloading controls to HA

This has no support for the timers and just one additional switch for the join command

ESPHome ITHO control

Trying to get ESPHome to mimic what is comprised in

How-to

Not tested from HA yet, just from CLI. Assumption: you have a machine ready with the ESP8266 and C1101 connected to it.

That machine is also ready to go as instructed per https://esphome.io/guides/getting_started_command_line.html (pip install)

  • Copy itho.yaml and c1101h to a directory of choice
  • Run esphome itho.yaml run and watch the magic happen
  • Go into HA, choose integrations and add your ITHO
  • If everything goes well, you'll see the fan within HA
  • Enjoy!

Wiring schema used:

Connections between the CC1101 and the ESP8266 or Arduino:
CC11xx pins    ESP pins Arduino pins  Description
*  1 - VCC        VCC      VCC           3v3
*  2 - GND        GND      GND           Ground
*  3 - MOSI       13=D7    Pin 11        Data input to CC11xx
*  4 - SCK        14=D5    Pin 13        Clock pin
*  5 - MISO/GDO1  12=D6    Pin 12        Data output from CC11xx / serial clock from CC11xx
*  6 - GDO2       04=D1    Pin  2        Programmable output
*  7 - GDO0       ?        Pin  ?        Programmable output
*  8 - CSN        15=D8    Pin 10        Chip select / (SPI_SS)

Dependencies