[Prototype] Real Time for The Masses on the homogeneous dual core LPC55S69 (2x M33)
The onboard debugger comes flashed with CMSIS-DAP firmware but I didn't have much luck with it so I replaced it with J-LINK firmware.
$ # on a terminal
$ JLinkGDBServer -device LPC55S69 -if SWD$ # on another terminal
$ rustup default beta # or Rust 1.36 when that's out
$ rustup target add thumbv8m.main-none-eabi
$ cd lpc55s6x
$ cargo run --example xschedule --release
(gdb) continue(If you get a linker error when you build an example without optimizations then
re-compile with --release -- I don't have time to fix the linker error right
now)
This example should blink the RGB led on the board.
Note that flashing sometimes fails so you may need to re-rerun the cargo run
command.
All source code (including code snippets) is licensed under either of
-
Apache License, Version 2.0 (LICENSE-APACHE or https://www.apache.org/licenses/LICENSE-2.0)
-
MIT license (LICENSE-MIT or https://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be licensed as above, without any additional terms or conditions.