PacXplorer

PacXplorer is an IDA plugin that adds XREFs between virtual functions and their call sites.
This is accomplished by leveraging PAC codes in ARM64e binaries.

Installation

install ida-nentode somewhere IDA can import it
clone the repository and symlink ~/.idapro/plugins/pacxplorer.py to pacxplorer.py in the cloned repo

Usage

Preliminary Analysis

open an IDB and make sure autoanalysis has finished
1.1. KernelCache only: make sure to run ida_kernelcache (Cellebrite's fork). This defines the `vtable for' symbols
from the menu select Edit -> Plugins -> PacXplorer -> Analyse IDB
2.2. if asked, point PacXplorer to the original input binary file that created the IDB
- this will only happen if the original PAC codes are not present in the IDB and the input binary can't be located automatically
done!

Continuous Use

TL;DR

⌘-x or Right Click -> Jump to PAC XREFs at suitable locations will open a selection window

From call site to virtual function

place the cursor on a MOVK instruction near the call site to a virtual function (marked with a comment).
press the hotkey or activate the menu entry
a list of possible virtual methods called will open
if the same virtual function is called from several vtables, the class column will show <multiple classes> instead of a class name
- Right click -> PAC: toggle unique function names toggles this grouping

From virtual function to call site

place the cursors either on a vtable entry or at the start of a virtual function
press the hotkey or activate the menu entry
a list of possible call sites will open

Principals of Operation

PAC codes sign pointers with a key and a context.
LLVM ABI specifies that the context of vtable entries is a mix between the entry's address and a hash of the function prototype.

Consider the following vtable at address 0x00000001 abcdef00:

offset	method	hash
`0`	`foo()`	`0x1234`
`8`	`bar()`	`0x9876`

The formula for calculating the context is:

addr_part = (addr_of_vtable + offset_of_method) & 0x0000ffffffffffff
hash_part = (hash & 0xffff) << 48
context   =  addr_part | hash_part

Hence when calling bar(), the context will be: 0x98760001 abcdef08.

Out of these factors, the offset of the method and the hash are known at compile time, but the actual address of the vtable is only known at runtime, through the this ptr (heck, this is the whole purpose of vtables to begin with).

Therefore, a typical (simplified) code snippet might look as follows:

LDR     X8, [X0]            ; load vtable address
LDRA    X9, [X8,#0x18]!     ; X8 = vtbl + offset
MOVK    X8, #0x68DA,LSL#48  ; set the hash 
BLRAA   X9, X8              ; virtual call

PacXplorer looks for similar MOVK instructions in all of the defined functions and analyses the code leading up to them, noting the offset in the table and the hash value, and constructs PAC tuple mappings of {(offset, hash): address of call}

On the other hand, PacXplorer iterates over all of the defined vtables, which it finds using symbol names.
In the binary, each vtable contains tagged pointers, which will have been untagged by IDA. The pointer tags embed the hash values that are used for PAC.
PacXplorer looks for the original pointer tags, which will have either been preserved in IDA's patched bytes window, or by opening the actual original binary. Using that, it creates the same PAC tuple for each virtual call, and construct a mapping of {(offset, hash): entry in vtable}.

At runtime, a simple matching of these two mappings is performed.

Q&A

Q: Why are there several virtual methods in the XREFs window?
A: This is the inherent ambiguity which is an intrinsic limitation of this method.
For every class inheritance tree, when calling a virtual method that's present in the parent class and overloaded in some of the children, there is no knowing at compile time which overloaded version will actually get called.
Obviously only what's known at compile time can be statically analysed.

Q: Why use a special window and not add the XREFs to the regular XREF list?
A: Due to the inherent ambiguity of which virtual function is called, I decided not to add (potentially many) bogus XREFs to the regular list, but keep them separated.

Q: Could there be false positives?
A: Yes. Besides the inherent ambiguity, there could also be cases where two functions in unrelated vtables generate the same (offset, hash) tuple.
When trying out using the hash value alone (disregarding the offset in the vtable), I've encountered many such false positives. Using the combination of (offset, hash) I'm yet to observe any such false positives.

Q: Why is the XREF from the MOVK instruction and not the BLRAA call?
A: I've encountered instances of several virtual calls using the same BLRAA.
Think of a function that selects a command handler with a switch-case, and all the cases jump to the same exit node that performs the call.

Q: Great stuff, I want to work with you!
A: Uhh, that's not really a question but thanks! click here (Remote talent welcome)

Limitations

Works only on ARM64e binaries that conform to the ABI
Vtable symbols need to be present in the binary ( `vtable for'). In the case of the Kernel, ida_kernelcache needs to have been run. Note that the official version doesn't support recent Kernels, but Cellebrite's fork is up to date.
If the tagged pointers haven't been preserved in the IDB, the original binary is needed for the analysis stage (but not afterwards)
Hexrays support WIP

vngkv123/PacXplorer