/TyconMax_Klipper

Klipper for Kywoo3D Tycoon Max

Specification

Item Description
Printer Kywoo3D Tycoon Max
Board (MCU) Kywoo v1.4 (MKS Robin Nano v3 based)
Klipper Board BIGTECHTREE CM4 + PI4B Adapter

Firmware

Firmware settings

Instructions

  1. Enter klipper firmware configuration:
> cd  ~/klipper
> make menuconfig

  1. Set parameters as on Firmware section and save;

  2. Build the new bin file through make command:

> make
  1. Run the fix script for mks boards and move the result file to configuration folder:
> ./scripts/update_mks_robin.py out/klipper.bin out/Robin_nano35.bin
> cp out/Robin_nano35.bin ~/printer_data/config/
>
  1. Download the bin file from Moonrake interface and follow the instructions on Kywoo site to flash it.