Orignally designed and coded by @roarfred, see the original repo at roarfred/AmsToMqttBridge
This repository contains the code and schematics necessary to build a device to receive and convert data from AMS electrical meters installed in Norway. The code can be used on both ESP8266 and ESP32, both as custom build devices or built from readily available modules. It reads data from the HAN port of the meter and sends this to a configured MQTT bus.
In the Release section of this repository, you will find precompiled binaries for some common boards.
- esp12e :: General ESP8266 board with 12E or 12F chip, ex NodeMCU board.
- hw1esp12e :: First version hardware with ESP 12E of 12F chip.
- featheresp32 :: Adafruit ESP32 feather
Flashing binaries with esptool.py
Linux:
esptool.py --port /dev/ttyUSB0 write_flash 0x0 binary-file.bin
Windows:
esptool.py --port COM1 write_flash 0x0 binary-file.bin