EFL Windows package installer
This project installs a set of libraries, most of them being compatible with LGPL v2.1. The others are compatible with GPL v2 or AGPL v3, for use with Etui. See below the list of installed libraries with their version and license.
- mingw-w64 toolchain
- tar
- make
- cmake
- yasm
- nasm
- wget
- gperf (native on Windows, not MSYS2 one)
- autotools
- python
- perl
- meson >= 0.60.0
- ninja
- flex
- bison
- nsis
To build the NSIS installer, the EnVar plug-in is mandatory. See https://nsis.sourceforge.io/EnVar_plug-in for the latest link and documentation.
- Install MSYS2 : https://www.msys2.org/ (steps 1 to 4)
- In the start menu,launch
MSYS2 64bit
-->MSYS2 MINGW32
- In the terminal, launch
pacman -Syu
, pressY
to proceed the installation. PressY
to close the terminal - In the start menu, launch again
MSYS2 64bit
-->MSYS2 MINGW32
- Run `pacman -Syu base-devel autoconf automake libtool tar git wget python flex bison gettext-devel pkgconf make mingw-w64-i686-gettext-tools mingw-w64-i686-gperf mingw-w64-i686-nasm mingw-w64-i686-yasm mingw-w64-i686-cmake mingw-w64-i686-openmp mingw-w64-i686-toolchain mingw-w64-i686-ninja mingw-w64-i686-meson mingw-w64-i686-nsis
- When aksed for the selection, just press the Enter key for the default selection
- Press
Y
to proceed the installation. This may take several minutes
- Install MSYS2 : https://www.msys2.org/ (steps 1 to 4)
- In the start menu,launch
MSYS2 64bit
-->MSYS2 MINGW64
- In the terminal, launch
pacman -Syu
, pressY
to proceed the installation. PressY
to close the terminal - In the start menu,launch again
MSYS2 64bit
-->MSYS2 MINGW64
- Run `pacman -Syu base-devel autoconf automake libtool tar git wget python perl flex bison gettext-devel pkgconf make mingw-w64-x86_64-gettext-tools mingw-w64-x86_64-gperf mingw-w64-x86_64-nasm mingw-w64-x86_64-yasm mingw-w64-x86_64-cmake mingw-w64-x86_64-openmp mingw-w64-x86_64-toolchain mingw-w64-x86_64-ninja mingw-w64-x86_64-meson mingw-w64-x86_64-nsis
- When aksed for the selection, just press the Enter key for the default selection
- Press
Y
to proceed the installation This may take several minutes
- dnf install autoconf automake libtool gettext cmake yasm nasm gperf python perl ninja-build pkgconf mingw32-libgomp mingw32-gcc mingw32-gcc-c++ python3-pip bison flex make gcc-c++ mingw32-nsis
- run "pip3 install meson"
- Verify that meson >= 0.60.0 is installed
- dnf install autoconf automake libtool gettext cmake yasm nasm gperf python perl ninja-build pkgconf mingw64-libgomp mingw64-gcc mingw64-gcc-c++ python3-pip bison flex make gcc-c++ mingw32-nsis
- run "pip3 install meson"
- Verify that meson >= 0.60.0 is installed
- apt install autoconf automake libtool cmake yasm nasm gperf ninja-build pkgconf g++-mingw-w64-x86-64 python3-pip perl bison flex nsis
- run "pip3 install meson"
- Verify that meson >= 0.60.0 is installed
after cloning ewpi and changing to the ewpi directory:
gcc -O2 -std=c99 -o ewpi ewpi.c ewpi_map.c
To see the usage, run "./ewpi --help", which returns:
Usage: D:\Documents\msys2\home\vtorri\gitroot\ewpi\ewpi.exe [OPTION]
Compile and install the EFL dependencies.
Optional arguments:
--help show this help message and exit
--version show the Ewpi version and exit
--prefix=DIR install in DIR (must be an absolute path)
[default=$HOME/ewpi_$arch] $arch=32|64 base on
host value
--host=VAL host triplet, either i686-w64-mingw32 or x86_64-w64-mingw32
[default=x86_64-w64-mingw32]
--arch=VAL value passed to -march and -mtune gcc options
[default=i686|x86-64], depending on host value
--winver=VAL requested Windows version, win7 or win10 [default=win10]
--verbose verbose mode
--strip strip DLL
--nsis strip DLL and create the NSIS installer
--efl install the EFL
--jobs=VAL maximum number of used jobs [default=maximum]
--clean remove the archives and the created directories
(not removed by default)
Examples :
- ./ewpi --prefix=/opt/ewpi_32 --host=i686-w64-mingw32
- ./ewpi --host=x86_64-w64-mingw32 --efl --jobs=4 --clean
- brotli 1.1.0 (MIT)
- bzip2 1.0.8 (BSD 4-clause, LGPL 2.1 compatible)
- check 0.15.2(LGPL 2.1)
- curl 8.9.1 (MIT)
- dbus 1.14.10 (Academic Free License version 2.1)
- dejavu-fonts 2.37
- expat 2.6.2 (MIT)
- ffmpeg 7.0.2 (LGPL 2.1)
- flac 1.4.3 (LGPL 2.1)
- fontconfig 2.14.2 (MIT)
- freetype 2.13.3 (FreeType license)
- fribidi 1.0.15 (LGPL 2.1)
- gettext 0.22.4 (only libintl : LGPL 2.1)
- giflib 5.2.2 (MIT)
- glib2 2.76.3 (LGPL 2.1)
- graphene 1.10.8 (MIT)
- graphite2 1.3.14 (LGPL 2.1)
- gst-libav 1.24.7 (LGPL 2.1)
- gst-plugins-base 1.24.7 (LGPL 2.1)
- gst-plugins-good 1.24.7 (LGPL 2.1)
- gstreamer 1.24.7 (LGPL 2.1)
- harfbuzz 9.0.0 (MIT)
- highway 1.2.0 (Apache 2.0)
- iconv 0.0.8 (public domain)
- icu 75.1 (MIT)
- lcms2 2.16 (MIT)
- libaacs 0.11.1 (LGPL 2.1)
- libaom 3.10.0 (BSD 2-clause)
- libarchive 3.7.4 (BSD 2-clause)
- libass 0.17.3 (ISC)
- libavif 1.1.1 (BSD 2-clause)
- libbdplus 0.2.0 (LGPL 2.1)
- libblake2 0.98.1 (CC0 1.0)
- libbluray 1.3.4 (LGPL 2.1)
- libbs2b 3.1.0 (MIT)
- libdav1d 1.4.3 (BSD 2-clause)
- libdeflate 1.21 (MIT)
- libexif 0.6.24 (LGPL v2.1)
- libffi 3.4.6 (MIT)
- libgcrypt 1.11.0 (LGPL 2.1)
- libgme 0.6.3 (LGPL 2.1)
- libgpg-error 1.50 (LGPL 2.1)
- libgsm 1.0.22 (MIT)
- libilbc 3.0.4 (BSD 3-clause)
- libjpeg 3.0.3 (IJG and zlib)
- libjxl 0.10.3 (BSD 3-clause)
- libkvazaar 2.3.1 (BSD 3-clause)
- liblerc 4.0.0 (Apache 2.0)
- libmodplug 0.8.9 (public domain)
- libmysofa 1.3.2 (BSD 3-clause)
- libogg 1.3.5 (BSD 3-clause)
- libopenh264 2.4.1 (BSD 2-clause)
- libopenmpt 0.7.3 (BSD 3-clause)
- libpng 1.6.43 (BSD 3-clause)
- libpsl 0.21.5 (MIT)
- libraw 0.21.2 (LGPL v2.1)
- libsnappy 1.2.1 (BSD 3-clause)
- libsndfile 1.2.2 (LGPL 2.1)
- libsoxr 0.1.3 (LGPL 2.1)
- libssh2 1.11.0 (BSD 3-clause)
- libtiff 4.6.0 (BSD 2-clause)
- libvmaf 3.0.0 (BSD -2-clause + patent)
- libvorbis 1.3.7 (BSD 3-clause)
- libwavpack 5.6.0 (BSD 3-clause)
- libwebp 1.4.0 (BSD 3-clause)
- libxml2 2.13.3 (MIT)
- libyuv 1.89.5 (BSD 3-clause)
- luajit 2.1.20240311 (MIT + public domain for some parts)
- lz4 1.10.0 (BSD 2-clause for the library)
- mp3lame 3.100 (LGPL 2.1)
- mpg123 1.32.7 (LGPL 2.1)
- nghttp2 1.63.0 (MIT)
- openjpeg 2.5.2 (BSD 2-clause)
- openssl 3.3.0 (Apache 2.0)
- opus 1.5.2 (BSD 3-clause)
- orc 0.4.39 (BSD 2-clause)
- pixman 0.43.4 (MIT)
- regex 1.2.1 (MIT)
- utfcpp 4.0.5 (BSL 1.0)
- taglib 2.0.2 (LGPL 2.1)
- xz 5.6.2 (lzma : public domain)
- zlib 1.3.1 (zlib license)
- zstd 1.5.6 (BSD 3-clause)
- libde265 1.0.15 (LGPL v3)
- libheif 1.18.2 (LGPL v3)
- djvulibre 3.5.28 (GPL v2)
- shared-mime-info 2.4 (GPL v2: tool generating mime types, not distributed)
- jbig2dec 0.20 (AGPL v3)
- mupdf 1.24.9 (AGPL v3)