Selenium Docker
The project is made possible by volunteer contributors who have put in thousands of hours of their own time, and made the source code freely available under the Apache License 2.0.
Community
SeleniumHQ Slack
IRC (#selenium at Freenode)
Docker images for Selenium Standalone Server Hub and Node configurations with Chrome and Firefox
Images included:
- selenium/base: Base image which includes Java runtime and Selenium Server JAR file
- selenium/hub: Image for running a Grid Hub
- selenium/node-base: Base image for Grid Nodes which includes a virtual desktop environment
- selenium/node-chrome: Grid Node with Chrome installed, needs to be connected to a Grid Hub
- selenium/node-firefox: Grid Node with Firefox installed, needs to be connected to a Grid Hub
- selenium/node-chrome-debug: Grid Node with Chrome installed and runs a VNC server, needs to be connected to a Grid Hub
- selenium/node-firefox-debug: Grid Node with Firefox installed and runs a VNC server, needs to be connected to a Grid Hub
- selenium/standalone-chrome: Selenium Standalone with Chrome installed
- selenium/standalone-firefox: Selenium Standalone with Firefox installed
- selenium/standalone-chrome-debug: Selenium Standalone with Chrome installed and runs a VNC server
- selenium/standalone-firefox-debug: Selenium Standalone with Firefox installed and runs a VNC server
Running the images
❗ When executing docker run
for an image with Chrome or Firefox please either mount -v /dev/shm:/dev/shm
or use the flag --shm-size=2g
to use the host's shared memory.
Chrome
$ docker run -d -p 4444:4444 -v /dev/shm:/dev/shm selenium/standalone-chrome:3.12.0-americium
#OR
$ docker run -d -p 4444:4444 --shm-size=2g selenium/standalone-chrome:3.12.0-americium
Firefox
$ docker run -d -p 4444:4444 -v /dev/shm:/dev/shm selenium/standalone-firefox:3.12.0-americium
#OR
$ docker run -d -p 4444:4444 --shm-size 2g selenium/standalone-firefox:3.12.0-americium
This is a known workaround to avoid the browser crashing inside a docker container, here are the documented issues for
Chrome and Firefox.
The shm size of 2gb is arbitrary but known to work well, your specific use case might need a different value, it is recommended
to tune this value according to your needs. Along the examples -v /dev/shm:/dev/shm
will be used, but both are known to work.
Standalone Chrome and Firefox
$ docker run -d -p 4444:4444 -v /dev/shm:/dev/shm selenium/standalone-chrome:3.12.0-americium
# OR
$ docker run -d -p 4444:4444 -v /dev/shm:/dev/shm selenium/standalone-firefox:3.12.0-americium
Note: Only one standalone image can run on port 4444
at a time.
To inspect visually what the browser is doing use the standalone-chrome-debug
or standalone-firefox-debug
images. See Debugging section for details.
Selenium Grid Hub and Nodes
There are different ways to run the images and create a grid, check the following options.
Using docker networking
With this option, the hub and nodes will be created in the same network and they will recognize each other by their container name. A docker network needs to be created as a first step.
$ docker network create grid
$ docker run -d -p 4444:4444 --net grid --name selenium-hub selenium/hub:3.12.0-americium
$ docker run -d --net grid -e HUB_HOST=selenium-hub -v /dev/shm:/dev/shm selenium/node-chrome:3.12.0-americium
$ docker run -d --net grid -e HUB_HOST=selenium-hub -v /dev/shm:/dev/shm selenium/node-firefox:3.12.0-americium
When you are done using the grid and the containers have exited, the network can be removed with the following command:
# Remove all unused networks
$ docker network prune
# OR
# Removes the grid network
$ docker network rm grid
Via docker-compose
The most simple way to start a grid is with docker-compose, use the following
snippet as your docker-compose.yaml
, save it locally and in the same folder run docker-compose up
.
Version 2
# To execute this docker-compose yml file use docker-compose -f <file_name> up
# Add the "-d" flag at the end for deattached execution
version: '2'
services:
firefox:
image: selenium/node-firefox:3.12.0-americium
volumes:
- /dev/shm:/dev/shm
depends_on:
- hub
environment:
HUB_HOST: hub
chrome:
image: selenium/node-chrome:3.12.0-americium
volumes:
- /dev/shm:/dev/shm
depends_on:
- hub
environment:
HUB_HOST: hub
hub:
image: selenium/hub:3.12.0-americium
ports:
- "4444:4444"
Version 3
# To execute this docker-compose yml file use docker-compose -f <file_name> up
# Add the "-d" flag at the end for deattached execution
version: "3"
services:
selenium-hub:
image: selenium/hub:3.12.0-americium
container_name: selenium-hub
ports:
- "4444:4444"
chrome:
image: selenium/node-chrome:3.12.0-americium
depends_on:
- selenium-hub
environment:
- HUB_HOST=selenium-hub
- HUB_PORT=4444
firefox:
image: selenium/node-firefox:3.12.0-americium
depends_on:
- selenium-hub
environment:
- HUB_HOST=selenium-hub
- HUB_PORT=4444
To stop the grid and cleanup the created containers, run docker-compose down
.
Using --link
This option can be used for a single host scenario (hub and nodes running in a single machine), but it is not recommended for longer term usage since this is a docker legacy feature. It could serve you as an option for a proof of concept, and for simplicity it is used in the examples shown from now on.
$ docker run -d -p 4444:4444 --name selenium-hub selenium/hub:3.12.0-americium
$ docker run -d --link selenium-hub:hub -v /dev/shm:/dev/shm selenium/node-chrome:3.12.0-americium
$ docker run -d --link selenium-hub:hub -v /dev/shm:/dev/shm selenium/node-firefox:3.12.0-americium
Configuring the containers
JAVA_OPTS Java Environment Options
You can pass JAVA_OPTS
environment variable to java process.
$ docker run -d -p 4444:4444 -e JAVA_OPTS=-Xmx512m --name selenium-hub selenium/hub:3.12.0-americium
SE_OPTS Selenium Configuration Options
You can pass SE_OPTS
variable with additional commandline parameters for starting a hub or a node.
$ docker run -d -p 4444:4444 -e SE_OPTS="-debug" --name selenium-hub selenium/hub:3.12.0-americium
Selenium Hub and Node Configuration options
For special network configurations or when the hub and the nodes are running on different machines HUB_HOST
and HUB_PORT
or REMOTE_HOST
can be used.
You can pass the HUB_HOST
and HUB_PORT
options to provide the hub address to a node when needed.
# Assuming a hub was already started
$ docker run -d -e HUB_HOST=<hub_ip|hub_name> -e HUB_PORT=4444 selenium/node-chrome:3.12.0-americium
Some network topologies might prevent the hub to reach the node through the url given at registration time, REMOTE_HOST
can be used to supply the hub a url where the node is reachable under your specific network configuration
# Assuming a hub was already started
$ docker run -d -e HUB_HOST=<hub_ip|hub_name> -e REMOTE_HOST="http://node_ip|node_name:node_port" selenium/node-firefox:3.12.0-americium
Building the images
Clone the repo and from the project directory root you can build everything by running:
$ VERSION=local make build
If you need to configure environment variable in order to build the image (http proxy for instance), simply set an environment variable BUILD_ARGS
that contains the additional variables to pass to the docker context (this will only work with docker >= 1.9)
$ BUILD_ARGS="--build-arg http_proxy=http://acme:3128 --build-arg https_proxy=http://acme:3128" make build
Note: Omitting VERSION=local
will build the images with the current version number thus overwriting the images downloaded from Docker Hub.
Using the images
Example: Spawn a container for testing in Chrome:
$ docker run -d --name selenium-hub -p 4444:4444 selenium/hub:3.12.0-americium
$ CH=$(docker run --rm --name=ch \
--link selenium-hub:hub -v /e2e/uploads:/e2e/uploads \
-v /dev/shm:/dev/shm \
selenium/node-chrome:3.12.0-americium)
Note: -v /e2e/uploads:/e2e/uploads
is optional in case you are testing browser uploads on your web app you will probably need to share a directory for this.
Example: Spawn a container for testing in Firefox:
This command line is the same as for Chrome. Remember that the Selenium running container is able to launch either Chrome or Firefox, the idea around having 2 separate containers, one for each browser is for convenience plus avoiding certain :focus
issues your web app may encounter during end-to-end test automation.
$ docker run -d --name selenium-hub -p 4444:4444 selenium/hub:3.12.0-americium
$ FF=$(docker run --rm --name=fx \
--link selenium-hub:hub -v /e2e/uploads:/e2e/uploads \
-v /dev/shm:/dev/shm \
selenium/node-firefox:3.12.0-americium)
Note: Since a Docker container is not meant to preserve state and spawning a new one takes less than 3 seconds you will likely want to remove containers after each end-to-end test with --rm
command. You need to think of your Docker containers as single processes, not as running virtual machines, in case you are familiar with Vagrant.
Debugging
In the event you wish to visually see what the browser is doing you will want to run the debug
variant of node or standalone images. A VNC server will run on port 5900. You are free to map that to any free external port that you wish. Keep in mind that you will only be able to run one node per port so if you wish to include a second node, or more, you will have to use different ports, the 5900 as the internal port will have to remain the same though as thats the VNC service on the node. The second example below shows how to run multiple nodes and with different VNC ports open:
$ docker run -d -P -p <port4VNC>:5900 --link selenium-hub:hub -v /dev/shm:/dev/shm selenium/node-chrome-debug:3.12.0-americium
$ docker run -d -P -p <port4VNC>:5900 --link selenium-hub:hub -v /dev/shm:/dev/shm selenium/node-firefox-debug:3.12.0-americium
e.g.:
$ docker run -d -P -p 5900:5900 --link selenium-hub:hub -v /dev/shm:/dev/shm selenium/node-chrome-debug:3.12.0-americium
$ docker run -d -P -p 5901:5900 --link selenium-hub:hub -v /dev/shm:/dev/shm selenium/node-firefox-debug:3.12.0-americium
to connect to the Chrome node on 5900 and the Firefox node on 5901 (assuming those node are free, and reachable).
And for standalone:
$ docker run -d -p 4444:4444 -p <port4VNC>:5900 -v /dev/shm:/dev/shm selenium/standalone-chrome-debug:3.12.0-americium
# OR
$ docker run -d -p 4444:4444 -p <port4VNC>:5900 -v /dev/shm:/dev/shm selenium/standalone-firefox-debug:3.12.0-americium
or
$ docker run -d -p 4444:4444 -p 5900:5900 -v /dev/shm:/dev/shm selenium/standalone-chrome-debug:3.12.0-americium
# OR
$ docker run -d -p 4444:4444 -p 5901:5900 -v /dev/shm:/dev/shm selenium/standalone-firefox-debug:3.12.0-americium
You can acquire the port that the VNC server is exposed to by running: (Assuming that we mapped the ports like this: 49338:5900)
$ docker port <container-name|container-id> 5900
#=> 0.0.0.0:49338
In case you have RealVNC binary vnc
in your path, you can always take a look, view only to avoid messing around your tests with an unintended mouse click or keyboard interrupt:
$ ./bin/vncview 127.0.0.1:49160
If you are running Boot2Docker on OS X then you already have a VNC client built-in. You can connect by entering vnc://<boot2docker-ip>:49160
in Safari or Alfred.
When you are prompted for the password it is secret
. If you wish to change this then you should either change it in the /NodeBase/Dockerfile
and build the images yourself, or you can define a Docker image that derives from the posted ones which reconfigures it:
#FROM selenium/node-chrome-debug:3.12.0-americium
#FROM selenium/node-firefox-debug:3.12.0-americium
#Choose the FROM statement that works for you.
RUN x11vnc -storepasswd <your-password-here> /home/seluser/.vnc/passwd
If you want to run VNC without password authentication you can set the environment variable VNC_NO_PASSWORD=1
.
Troubleshooting
All output is sent to stdout so it can be inspected by running:
$ docker logs -f <container-id|container-name>