AmnewziaWG Easy

You have found the easiest way to install & manage WireGuard on any Linux host!

Features

All-in-one: AmneziaWG + Web UI.
Easy installation, simple to use.
List, create, edit, delete, enable & disable clients.
Show a client's QR code.
Download a client's configuration file.
Statistics for which clients are connected.
Tx/Rx charts for each connected client.
Gravatar support or random avatars.
Automatic Light / Dark Mode
Multilanguage Support
Traffic Stats (default off)
One Time Links (default off)
Client Expiry (default off)
Prometheus metrics support

Requirements

A host with Docker installed.

Installation

1. Install Docker

If you haven't installed Docker yet, install it by running:

curl -sSL https://get.docker.com | sh
sudo usermod -aG docker $(whoami)
exit

And log in again.

2. Run AmneziaWG Easy

To automatically install & run wg-easy, simply run:

  docker run -d \
  --name=amnezia-wg-easy \
  -e LANG=en \
  -e WG_HOST=<🚨YOUR_SERVER_IP> \
  -e PASSWORD_HASH=<🚨YOUR_ADMIN_PASSWORD_HASH> \
  -e PORT=51821 \
  -e WG_PORT=51820 \
  -v ~/.amnezia-wg-easy:/etc/wireguard \
  -p 51820:51820/udp \
  -p 51821:51821/tcp \
  --cap-add=NET_ADMIN \
  --cap-add=SYS_MODULE \
  --sysctl="net.ipv4.conf.all.src_valid_mark=1" \
  --sysctl="net.ipv4.ip_forward=1" \
  --device=/dev/net/tun:/dev/net/tun \
  --restart unless-stopped \
  ghcr.io/w0rng/amnezia-wg-easy

💡 Replace YOUR_SERVER_IP with your WAN IP, or a Dynamic DNS hostname.

💡 Replace YOUR_ADMIN_PASSWORD_HASH with a bcrypt password hash to log in on the Web UI. See How_to_generate_an_bcrypt_hash.md for know how generate the hash.

The Web UI will now be available on http://0.0.0.0:51821.

The Prometheus metrics will now be available on http://0.0.0.0:51821/metrics. Grafana dashboard 21733

💡 Your configuration files will be saved in ~/.amnezia-wg-easy

Options

These options can be configured by setting environment variables using -e KEY="VALUE" in the docker run command.

Env	Default	Example	Description
`PORT`	`51821`	`6789`	TCP port for Web UI.
`WEBUI_HOST`	`0.0.0.0`	`localhost`	IP address web UI binds to.
`PASSWORD_HASH`	-	`$2y$05$Ci...`	When set, requires a password when logging in to the Web UI. See How to generate an bcrypt hash.md for know how generate the hash.
`WG_HOST`	-	`vpn.myserver.com`	The public hostname of your VPN server.
`WG_DEVICE`	`eth0`	`ens6f0`	Ethernet device the wireguard traffic should be forwarded through.
`WG_PORT`	`51820`	`12345`	The public UDP port of your VPN server. WireGuard will listen on that (othwise default) inside the Docker container.
`WG_CONFIG_PORT`	`51820`	`12345`	The UDP port used on Home Assistant Plugin
`WG_MTU`	`null`	`1420`	The MTU the clients will use. Server uses default WG MTU.
`WG_PERSISTENT_KEEPALIVE`	`0`	`25`	Value in seconds to keep the "connection" open. If this value is 0, then connections won't be kept alive.
`WG_DEFAULT_ADDRESS`	`10.8.0.x`	`10.6.0.x`	Clients IP address range.
`WG_DEFAULT_DNS`	`1.1.1.1`	`8.8.8.8, 8.8.4.4`	DNS server clients will use. If set to blank value, clients will not use any DNS.
`WG_ALLOWED_IPS`	`0.0.0.0/0, ::/0`	`192.168.15.0/24, 10.0.1.0/24`	Allowed IPs clients will use.
`WG_PRE_UP`	`...`	-	See config.js for the default value.
`WG_POST_UP`	`...`	`iptables ...`	See config.js for the default value.
`WG_PRE_DOWN`	`...`	-	See config.js for the default value.
`WG_POST_DOWN`	`...`	`iptables ...`	See config.js for the default value.
`WG_ENABLE_EXPIRES_TIME`	`false`	`true`	Enable expire time for clients
`LANG`	`en`	`de`	Web UI language (Supports: en, ua, ru, tr, no, pl, fr, de, ca, es, ko, vi, nl, is, pt, chs, cht, it, th, hi).
`UI_TRAFFIC_STATS`	`false`	`true`	Enable detailed RX / TX client stats in Web UI
`UI_CHART_TYPE`	`0`	`1`	UI_CHART_TYPE=0 # Charts disabled, UI_CHART_TYPE=1 # Line chart, UI_CHART_TYPE=2 # Area chart, UI_CHART_TYPE=3 # Bar chart
`DICEBEAR_TYPE`	`false`	`bottts`	see dicebear types
`USE_GRAVATAR`	`false`	`true`	Use or not GRAVATAR service
`WG_ENABLE_ONE_TIME_LINKS`	`false`	`true`	Enable display and generation of short one time download links (expire after 5 minutes)
`MAX_AGE`	`0`	`1440`	The maximum age of Web UI sessions in minutes. `0` means that the session will exist until the browser is closed.
`UI_ENABLE_SORT_CLIENTS`	`false`	`true`	Enable UI sort clients by name
`ENABLE_PROMETHEUS_METRICS`	`false`	`true`	Enable Prometheus metrics `http://0.0.0.0:51821/metrics` and `http://0.0.0.0:51821/metrics/json`
`PROMETHEUS_METRICS_PASSWORD`	-	`$2y$05$Ci...`	If set, Basic Auth is required when requesting metrics. See How to generate an bcrypt hash.md for know how generate the hash.
`JC`	`random`	`5`	Junk packet count — number of packets with random data that are sent before the start of the session.
`JMIN`	`50`	`25`	Junk packet minimum size — minimum packet size for Junk packet. That is, all randomly generated packets will have a size no smaller than Jmin.
`JMAX`	`1000`	`250`	Junk packet maximum size — maximum size for Junk packets.
`S1`	`random`	`75`	Init packet junk size — the size of random data that will be added to the init packet, the size of which is initially fixed.
`S2`	`random`	`75`	Response packet junk size — the size of random data that will be added to the response packet, the size of which is initially fixed.
`H1`	`random`	`1234567891`	Init packet magic header — the header of the first byte of the handshake. Must be < uint_max.
`H2`	`random`	`1234567892`	Response packet magic header — header of the first byte of the handshake response. Must be < uint_max.
`H3`	`random`	`1234567893`	Underload packet magic header — UnderLoad packet header. Must be < uint_max.
`H4`	`random`	`1234567894`	Transport packet magic header — header of the packet of the data packet. Must be < uint_max.

If you change WG_PORT, make sure to also change the exposed port.

Updating

To update to the latest version, simply run:

docker stop amnezia-wg-easy
docker rm amnezia-wg-easy
docker pull ghcr.io/w0rng/amnezia-wg-easy

And then run the docker run -d \ ... command above again.

Thanks

Based on wg-easy by Emile Nijssen.
Use integrations with AmneziaWg from amnezia-wg-easy by Viktor Yudov.