GPS in Weatherproof - Chassis code and mechanicals
Sat 4 Dec 11:45:17 UTC 2021
Wanted functional units to test individual hardware enclosed in a single chassis.
Chassis already wired (2017) and tested on old firmware. This project aims to update and to document to some extent. ;)
the chassis is here:
[ https://www.adafruit.com/product/905 ]
the GPS module is here:
[ https://www.adafruit.com/product/3133 ]
(Looks like it, anyway - could be another one from them but this is probably it)
the USB pass-through is here:
[ https://www.adafruit.com/product/3258 ]
the buzzer (passive) is here:
[ https://www.adafruit.com/product/160 ]
the graphic LCD is here:
[ https://www.adafruit.com/product/250 ]
its pinout is here:
[ https://cdn-shop.adafruit.com/970x728/250-04.jpg ]
It's wired to Feather M0 Express on the top row, D11-D5 (contiguous, five pins exactly):
-- snip --
Adafruit_GPS GPS(&GPSSerial);
134
135
136 // MOSI, SCK, A0, RST, CS
137 // ST7565 glcd(11, 10, 9, 6, 5);
138
139 // Use MOSI and SCK hardware pins on D29 and D30:
140 // ST7565 glcd(29, 30, 9, 6, 5);
141 ST7565 glcd(11, 10, 9, 6, 5); // stands as-is 4 Dec 2021
-- snip --
Note: D29 D30 old news - corrected to D11 and D10 there.
END.