Voron Trident 250x250x250mm - Klipper Octopi Those are some config and mods I'm currently using on my printer.
├── klicky # Click mode stls I used
├── klicky-bed-mesh-calibrate.cfg
├── klicky-macros.cfg
├── klicky-probe.cfg
├── klicky-variables.cfg
├── klicky-z-tilt-adjust.cfg
├── picamera # PI Camera suport STLs
│ ├── Pi_Camera_10cm_Arm.stl
│ ├── Pi_Camera_2020_Adapter.stl
│ ├── Pi_Camera_5cm_Arm.stl
│ ├── Pi_Camera_Back.3mf
│ ├── Pi_Camera_Back_Adapter.stl
│ ├── Pi_Camera_Back_No_IR.stl
│ ├── Pi_Camera_Back.stl
│ ├── Pi_Camera_Back_Tripod.stl
│ ├── Pi_Camera_Front_No_IR.stl
│ └── Pi_Camera_Front.stl
├── printer-20220128_001910.cfg # Old printer config files.
├── printer-20220128_010007.cfg
├── printer-20220128_010231.cfg
├── printer-20220128_010348.cfg
├── printer-20220128_032042.cfg
├── printer-20220128_113131.cfg
├── printer.cfg # current config file
├── README.md
├── stls # Some skirts and other stls
│ ├── [a]_60mm_fan_blank_insert_x2.3mf
│ ├── [a]_60mm_fan_blank_insert_x2.stl
│ ├── [a]_btt_knob_light_shield.stl
│ ├── [a]_keystone_blank_insert_x2.stl
│ ├── power_inlet_adamstech.stl
│ ├── power_inlet_filtered.stl
│ ├── side_fan_support_x2.stl
│ ├── side_skirt_a_250_x2.stl
│ ├── side_skirt_b_250_x2.3mf
│ └── side_skirt_b_250_x2.stl
└── video-cam.sh # script for backup in case I need to start the camera service outside