- push, pall mandatory Implement the push and pall opcodes.
The push opcode
The opcode push pushes an element to the stack.
Usage: push where is an integer if is not an integer or if there is no argument given to push, print the error message L<line_number>: usage: push integer, followed by a new line, and exit with the status EXIT_FAILURE where is the line number in the file You won’t have to deal with overflows. Use the atoi function The pall opcode
The opcode pall prints all the values on the stack, starting from the top of the stack.
Usage pall
Format: see example
If the stack is empty, don’t print anything
julien@ubuntu:/monty$ cat -e bytecodes/00.m
push 1$
push 2$
push 3$
pall$
julien@ubuntu:/monty$ ./monty bytecodes/00.m
3
2
1
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox
- pint mandatory Implement the pint opcode.
The pint opcode
The opcode pint prints the value at the top of the stack, followed by a new line.
Usage: pint
If the stack is empty, print the error message L<line_number>: can't pint, stack empty, followed by a new line, and exit with the status EXIT_FAILURE
julien@ubuntu:/monty$ cat bytecodes/06.m
push 1
pint
push 2
pint
push 3
pint
julien@ubuntu:/monty$ ./monty bytecodes/06.m
1
2
3
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 2. pop mandatory Implement the pop opcode.
The pop opcode
The opcode pop removes the top element of the stack.
Usage: pop
If the stack is empty, print the error message L<line_number>: can't pop an empty stack, followed by a new line, and exit with the status EXIT_FAILURE
julien@ubuntu:/monty$ cat bytecodes/07.m
push 1
push 2
push 3
pall
pop
pall
pop
pall
pop
pall
julien@ubuntu:/monty$ ./monty bytecodes/07.m
3
2
1
2
1
1
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 3. swap mandatory Implement the swap opcode.
The swap opcode
The opcode swap swaps the top two elements of the stack.
Usage: swap
If the stack contains less than two elements, print the error message L<line_number>: can't swap, stack too short, followed by a new line, and exit with the status EXIT_FAILURE
julien@ubuntu:/monty$ cat bytecodes/09.m
push 1
push 2
push 3
pall
swap
pall
julien@ubuntu:/monty$ ./monty bytecodes/09.m
3
2
1
2
3
1
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 4. add mandatory Implement the add opcode.
The add opcode
The opcode add adds the top two elements of the stack.
Usage: add If the stack contains less than two elements, print the error message L<line_number>: can't add, stack too short, followed by a new line, and exit with the status EXIT_FAILURE The result is stored in the second top element of the stack, and the top element is removed, so that at the end: The top element of the stack contains the result The stack is one element shorter julien@ubuntu:~/monty$ cat bytecodes/12.m push 1 push 2 push 3 pall add pall
julien@ubuntu:/monty$ ./monty bytecodes/12.m
3
2
1
5
1
julien@ubuntu:/monty$
Repo:
GitHub repository: monty ? Get a sandbox 5. nop mandatory Implement the nop opcode.
The nop opcode
The opcode nop doesn’t do anything.
Usage: nop Repo:
GitHub repository: monty ? Get a sandbox 6. sub #advanced Implement the sub opcode.
The sub opcode
The opcode sub subtracts the top element of the stack from the second top element of the stack.
Usage: sub
If the stack contains less than two elements, print the error message L<line_number>: can't sub, stack too short, followed by a new line, and exit with the status EXIT_FAILURE
The result is stored in the second top element of the stack, and the top element is removed, so that at the end:
The top element of the stack contains the result
The stack is one element shorter
julien@ubuntu:/monty$ cat bytecodes/19.m
push 1
push 2
push 10
push 3
sub
pall
julien@ubuntu:/monty$ ./monty bytecodes/19.m
7
2
1
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 7. div #advanced Implement the div opcode.
The div opcode
The opcode div divides the second top element of the stack by the top element of the stack.
Usage: div If the stack contains less than two elements, print the error message L<line_number>: can't div, stack too short, followed by a new line, and exit with the status EXIT_FAILURE The result is stored in the second top element of the stack, and the top element is removed, so that at the end: The top element of the stack contains the result The stack is one element shorter If the top element of the stack is 0, print the error message L<line_number>: division by zero, followed by a new line, and exit with the status EXIT_FAILURE Repo:
GitHub repository: monty ? Get a sandbox 8. mul #advanced Implement the mul opcode.
The mul opcode
The opcode mul multiplies the second top element of the stack with the top element of the stack.
Usage: mul If the stack contains less than two elements, print the error message L<line_number>: can't mul, stack too short, followed by a new line, and exit with the status EXIT_FAILURE The result is stored in the second top element of the stack, and the top element is removed, so that at the end: The top element of the stack contains the result The stack is one element shorter Repo:
GitHub repository: monty ? Get a sandbox 9. mod #advanced Implement the mod opcode.
The mod opcode
The opcode mod computes the rest of the division of the second top element of the stack by the top element of the stack.
Usage: mod If the stack contains less than two elements, print the error message L<line_number>: can't mod, stack too short, followed by a new line, and exit with the status EXIT_FAILURE The result is stored in the second top element of the stack, and the top element is removed, so that at the end: The top element of the stack contains the result The stack is one element shorter If the top element of the stack is 0, print the error message L<line_number>: division by zero, followed by a new line, and exit with the status EXIT_FAILURE Repo:
GitHub repository: monty ? Get a sandbox 10. comments #advanced Every good language comes with the capability of commenting. When the first non-space character of a line is #, treat this line as a comment (don’t do anything).
Repo:
GitHub repository: monty ? Get a sandbox 11. pchar #advanced Implement the pchar opcode.
The pchar opcode
The opcode pchar prints the char at the top of the stack, followed by a new line.
Usage: pchar
The integer stored at the top of the stack is treated as the ascii value of the character to be printed
If the value is not in the ascii table (man ascii) print the error message L<line_number>: can't pchar, value out of range, followed by a new line, and exit with the status EXIT_FAILURE
If the stack is empty, print the error message L<line_number>: can't pchar, stack empty, followed by a new line, and exit with the status EXIT_FAILURE
julien@ubuntu:/monty$ cat bytecodes/28.m
push 72
pchar
julien@ubuntu:/monty$ ./monty bytecodes/28.m
H
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 12. pstr #advanced Implement the pstr opcode.
The pstr opcode
The opcode pstr prints the string starting at the top of the stack, followed by a new line.
Usage: pstr
The integer stored in each element of the stack is treated as the ascii value of the character to be printed
The string stops when either:
the stack is over
the value of the element is 0
the value of the element is not in the ascii table
If the stack is empty, print only a new line
julien@ubuntu:/monty$ cat bytecodes/31.m
push 1
push 2
push 3
push 4
push 0
push 110
push 0
push 108
push 111
push 111
push 104
push 99
push 83
pstr
julien@ubuntu:/monty$ ./monty bytecodes/31.m
School
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 13. rotl #advanced Implement the rotl opcode.
The rotl opcode
The opcode rotl rotates the stack to the top.
Usage: rotl
The top element of the stack becomes the last one, and the second top element of the stack becomes the first one
rotl never fails
julien@ubuntu:/monty$ cat bytecodes/35.m
push 1
push 2
push 3
push 4
push 5
push 6
push 7
push 8
push 9
push 0
pall
rotl
pall
julien@ubuntu:/monty$ ./monty bytecodes/35.m
0
9
8
7
6
5
4
3
2
1
9
8
7
6
5
4
3
2
1
0
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 14. rotr #advanced Implement the rotr opcode.
The rotr opcode
The opcode rotr rotates the stack to the bottom.
Usage: rotr The last element of the stack becomes the top element of the stack rotr never fails Repo:
GitHub repository: monty ? Get a sandbox 15. stack, queue #advanced Implement the stack and queue opcodes.
The stack opcode
The opcode stack sets the format of the data to a stack (LIFO). This is the default behavior of the program.
Usage: stack The queue opcode
The opcode queue sets the format of the data to a queue (FIFO).
Usage: queue When switching mode:
The top of the stack becomes the front of the queue
The front of the queue becomes the top of the stack
julien@ubuntu:/monty$ cat bytecodes/47.m
queue
push 1
push 2
push 3
pall
stack
push 4
push 5
push 6
pall
add
pall
queue
push 11111
add
pall
julien@ubuntu:/monty$ ./monty bytecodes/47.m
1
2
3
6
5
4
1
2
3
11
4
1
2
3
15
1
2
3
11111
julien@ubuntu:~/monty$
Repo:
GitHub repository: monty ? Get a sandbox 16. Brainfck #advanced Write a Brainfck script that prints School, followed by a new line.
All your Brainfck files should be stored inside the bf sub directory
You can install the bf interpreter to test your code: sudo apt-get install bf
Read: Brainfck
julien@ubuntu:/monty/bf$ bf 1000-school.bf
School
julien@ubuntu:/monty/bf$
Repo:
GitHub repository: monty Directory: bf File: 1000-school.bf ? Get a sandbox 17. Add two digits #advanced Add two digits given by the user.
Read the two digits from stdin, add them, and print the result
The total of the two digits with be one digit-long (<10)
julien@ubuntu:/monty/bf$ bf ./1001-add.bf
81
9julien@ubuntu:/monty/bf$
Repo:
GitHub repository: monty Directory: bf File: 1001-add.bf ? Get a sandbox 18. Multiplication #advanced Multiply two digits given by the user.
Read the two digits from stdin, multiply them, and print the result
The result of the multiplication will be one digit-long (<10)
julien@ubuntu:/monty/bf$ bf 1002-mul.bf
24
8julien@ubuntu:/monty/bf$
Repo:
GitHub repository: monty Directory: bf File: 1002-mul.bf ? Get a sandbox 19. Multiplication level up #advanced Multiply two digits given by the user.
Read the two digits from stdin, multiply them, and print the result, followed by a new line
julien@ubuntu:/monty/bf$ bf 1003-mul.bf
77
49
julien@ubuntu:/monty/bf$
Repo:
GitHub repository: monty Directory: bf File: 1003-mul.bf ? Get a sandbox