watterott/ATmega328PB-Testing

Issues

• PWM on digital pin 2 acts strange

  #29 opened 7 years ago by MCUdude
  11

• SPI1

  #52 opened 4 years ago by wangnick
  2

• __AVR_HAVE_PRR0_PRTWI0 not correctly defined

  #51 opened 5 years ago by chaveiro
  1

• Error compiling

  #16 opened 8 years ago by mizraith
  9

• Problems with simultaneous master/slave

  #50 opened 5 years ago by haimiko
  3

• PlatformIO support

  #40 opened 6 years ago by streamliner18
  2

• m328pb flash programming using UART.

  #49 opened 6 years ago by bhargavmakodia
  1

• Device signature error while uploading bootloader

  #48 opened 6 years ago by bhargavmakodia
  3

• USART1 instead of USART0

  #47 opened 6 years ago by zdravke
  1

• Atmega328PB and RFM95W

  #46 opened 6 years ago by Lanzones
  3

• Optiboot PB loader on Nano Clone no worky

  #45 opened 6 years ago by zdravke
  4

• Bootloader and Sketch Upload with ISP works, Serial doesn't

  #43 opened 6 years ago by GoingForGold13
  3

• Dead chips

  #44 opened 6 years ago by LuisCRSousa
  3

• Precompiler issue with Wire.h

  #42 opened 6 years ago by JGSuw
  2

• Upload bootloader fail

  #38 opened 6 years ago by maxpromer
  3

• Explanation of Wire1 library

  #41 opened 6 years ago by maccacino
  1

• High power consumption in deep sleep

  #35 opened 6 years ago by Mirdox
  2

• ADC6 always reading 1023

  #39 opened 6 years ago by Atalonica
  1

• compile error #include <twi_def.h>

  #37 opened 7 years ago by Yoshi20
  1

• SPCR, SPDR, and SPSR are not declared in the scope

  #36 opened 7 years ago by jvinsko
  1

• Cannot compile

  #34 opened 7 years ago by sicsim
  4

• Sleep and wake up on ext. interrupt not working

  #31 opened 7 years ago by leozulfiu
  2

• Port Manipulation Problem

  #32 opened 7 years ago by Electro707
  1

• 'Serial' was not declared in this scope

  #27 opened 7 years ago by StephiB
  1

• Attach/Detach interrupt implementation missing error

  #26 opened 7 years ago by kiik
  1

• Serial not defined

  #25 opened 7 years ago by szwetsloot
  8

• "Device type not defined" and "interrupt attach/detach not completed"

  #24 opened 7 years ago by MarosMacko
  9

• Missing definitions for ADC6D and ADC7D

  #22 opened 7 years ago by emilfihlman
  1

• SPI not working correctly with V1.0.9

  #21 opened 8 years ago by Yoshi20
  8

• Second UART?

  #20 opened 8 years ago by gohai
  2

• Can't get it to work

  #19 opened 8 years ago by botletics
  23

• package_m328pb_index.json not compatible with 1.6.16

  #12 opened 8 years ago by markruys
  5

• spi not working

  #18 opened 8 years ago by goldkwang
  8

• Will you post the bootloader's source code?

  #17 opened 8 years ago by liudr
  2

• Missing pins on 328PB

  #15 opened 8 years ago by jandrewb
  2

• Burn bootloader

  #14 opened 8 years ago by liudr
  1

• Avrdude.conf

  #11 opened 8 years ago by d3orn
  1

• New pack available

  #10 opened 8 years ago by PaoloP74
  1

• Cannot upload Blink sketch to 328PB

  #9 opened 8 years ago by paulusjacobus
  16

• Arduino 1.6.11, v1.0.4, collect2.exe: error: ld returned 5 exit status

  #8 opened 8 years ago by oddstr13
  1

• avrdude Linux support

  #7 opened 8 years ago by woo2
  2

• New toolchain 3.5.2 with libc 2.0.0.

  #6 opened 9 years ago by PaoloP74
  1

• PWM on arduino pins 0, 1 and 2

  #3 opened 9 years ago by Xplorer001
  1