wchill/SwitchInputEmulator
Nintendo Switch controller emulator that allows for serial input to control the Switch. Emulates a HORIPAD Wired Controller.
C++
Issues
- 0
- 1
How does it work?
#23 opened by idkuaskedme - 1
Does it work with the newest switch version ?
#29 opened by TROLLERLOLL - 1
Project Site Down
#28 opened by numberisnan - 0
Cannot determine best way to send packets to device over serial to simulate joystick proxy
#30 opened by ChrisAJS - 17
Recommended handshaking for a Python Client
#5 opened by IBNobody - 0
How to set up.
#27 opened by ProtatoPlus - 4
How do I use this?
#16 opened by IAMSolaara - 5
Does not compile on Windows
#26 opened by danvx6 - 4
- 4
Teensy Compilation Error
#13 opened by adstep - 0
Can't build program
#24 opened by MrD3D3 - 1
Module missing
#22 opened by idkuaskedme - 0
Explore the feasibility of ps4
#21 opened by gjc9620 - 5
Unable to Sync with Arduino
#12 opened by tgb20 - 1
could not sync and packet error
#20 opened by wanglamao - 1
Rumble and gyro support
#19 opened by ekulabuhov - 2
Compatibility with ESP8266?
#18 opened by caribbeanwebdev - 1
Arduino nano?
#14 opened by cursedtoast - 2
Change baud rate
#17 opened by javmarina - 1
No response from Arduino Uno R3
#15 opened by QuincyHe - 10
- 7
Arduino board is not recognized by Switch
#10 opened by javmarina - 1
- 1
how is wired up
#9 opened by mko88 - 3
Serial communication from arduino sketch?
#4 opened by jwhop - 1
Without arduino
#3 opened by Hedgestock - 7
License file for project.
#2 opened by cal-pratt - 3
Is this based on what I did?
#1 opened by leo60228