/Molten

php probe for zipkin and opentracing

Primary LanguageCApache License 2.0Apache-2.0

molten

Readme in Chinese 中文

Build Status

molten is transparency tool for application tracing it self module call.

It trace php app core call and output zipkin/opentracing format trace log.

Provides features about muliti trace sapi, multi sampling type, upload tracing status, module control and muliti sink type.

It very easy to build a distributed systems tracing infrastructure base on php, already run on thousand instance on production env.

Table of contents


  1. Installing
  2. QuickStart
  3. Configure
  4. Verify
  5. Features
  6. Contributing
  7. License

Installing

Everything you should need to install molten on your system.

phpize
./configure
make && make install

make install copies molten.so to and appropriate location, but you still need to enable the module int the PHP config file, To do so, either edit your php.ini or add ad molten.ini file in /etc/php5/conf.d with the following contents:extension=molten.so.

at ./configure phase, you can also add --enable-zipkin-header=yes to support zipkin B3 header.

QuickStart

cd example
sh run.sh

open http://127.0.0.1:9411/zipkin/ in your browser, you can see the tracing detail in it.

if you think above is too simple, you also can do this.

cd example
sh complex.sh

it is cool, alright?

NOTICE if you not see the trace, you select EndTime +1 hour.

Configure

Base Config

molten.enable set 1 enable or set 0 disable, default 1.

molten.service_name is to set service name for label app service name.

molten.tracing_cli set 1 to trace, cli sapi, 0 not trace, just use for trace unit test, default 0.

Sampling Config

molten.sampling_type sampling type choose to use sampling by rate(1) or request(2), default is 1.

molten.sampling_request sampling by request, set to per min request num, defualt is 1000.

molten.sampling_rate determine a request sampled or not by rate, default is 64.

Control Config

molten.notify_uri the uri for molten to notify manger.

Report Config

report module output type is same as sink module

molten.report_interval reporter call interval, default 60.

molten.report_limit reporter list limit current only for error num, default 100.

Sink Config

molten.sink_type sink type, 1 write log, log path is depend on molten.sink_log_path, 2 write log to standand output, 3 write log to syslog, 4 use curl to send trace log, http uri depend on molten.sink_http_uri.

molten.output_type output spans on one line(1) or one line one span(2).

molten.sink_log_path locate log path.

molten.sink_http_uri locate log http uri.

molten.sink_syslog_unix_socket transform log to syslog udp unix domain collector.

Spans Config

molten.span_format span format, you can select zipkin or opentracing for different tracing system.

Verify

php -d extension=molten.so -d molten.enable=1 -d molten.sink_type=2 -d molten.tracing_cli=1 -d molten.sampling_rate=1 -r '$c=curl_init("http://localhost:12345");curl_exec($c);'

You can see output below:

[{"traceId":"%s","name":"php_curl","version":"php-4","id":"1.1","parentId":"1","timestamp":%d,"duration":%d,"annotations":[{"value":"cs","timestamp":%d,"endpoint":{"serviceName":"%s","ipv4":"%s"}},{"value":"cr","timestamp":%d,"endpoint":{"serviceName":"%s","ipv4":"%s"}}],"binaryAnnotations":[{"key":"http.url","value":"http:\/\/localhost:12345\/","endpoint":{"serviceName":"%s","ipv4":"%s"}},{"key":"error","value":"Failed
connect to localhost:12345; Connection
refused","endpoint":{"serviceName":"%s","ipv4":"%s"}}]},{"traceId":"%s","name":"cli","version":"php-4","id":"1","timestamp":%d,"duration":%d,"annotations":[{"value":"sr","timestamp":%d,"endpoint":{"serviceName":"%s","ipv4":"%s"}},{"value":"ss","timestamp":%d,"endpoint":{"serviceName":"%s","ipv4":"%s"}}],"binaryAnnotations":[{"key":"path","value":"-","endpoint":{"serviceName":"%s","ipv4":"%s"}}]}]

Features

the Config Block above, you can see which feature we support.

Interceptor

we intercept curl,pdo,mysqli,redis,mongodb,memcached extension to build execute time span info. for chain http request, we replace curl_exec,curl_setopt,curl_setopt_array to add http request trace header (x-w-traceid, x-w-spanid and so on).

the span_format is the way to custom span format, for two popular kinds (zipkin and opentracing).

Sampling

different sampling type and change parameter to control sampling, rate or request.

Sink

Sink is the output where you locate, molten support to standard fd, file, http and others (continue), on this way, we can choose where to output trace log.

Control

Use http to control our sampling.

see molten status, request http://domain/molten/status use GET method.

the output is below, already adapt the style of prometheus.

# HELP molten_request_all Number of all request.
# TYPE molten_request_all counter
molten_request_all %d
# HELP molten_request_capture Number of request be capture.
# TYPE molten_request_capture counter
molten_request_capture %d
# HELP molten_sampling_type the type of sampling.
# TYPE molten_sampling_type gauge
molten_sampling_type %d
# HELP molten_sampling_rate the rate of sampling.
# TYPE molten_sampling_rate gauge
molten_sampling_rate %d
# HELP molten_sampling_request the request be capture one min.
# TYPE molten_sampling_request gauge
molten_sampling_request %d

modify molten sampling, request http://domain/molten/status use POST method,

body is json format, field has the same meaning of config.

{"enable":1,"samplingType":2,"samplingRate":20,"samplingRequest":100}

Report

Report base import info which we do not sampled like error list.

Contributing

Welcome developers who willing to make it better.

the mail list below you can contract for discuss and improve more power.

phobosw@gmail.com

silkcutbeta@gmail.com

You may contribute in the following ways:

License

Apache License Version 2.0 see http://www.apache.org/licenses/LICENSE-2.0.html