/fast-vixel

an improved version of Rye Terrell's vixel, mainly to speed up the rendering speed and reduce memory usage.

Primary LanguageTypeScript

fast-vixel

Installation

npm install fast-vixel

This is project is base on wwwtyro's Vixel, most of the detail are the same. If you don't konw vixel, you can go checkout Vixel. But I personally made some changes to the source code and rewritten it with typescript.

The original Vixel render skymap into a Cubic frame buffers which you can roughly think of it as consisting of 6 frambuffers. The idea to spead up skymap rendering is to use one frambuffers instead of a Cubic frame buffers. The trick is to map the 3d position into 2d space, one common method is Paraboloid to Vector Normal. You may think that the skymap obtained like this will be a bit imperfect, but from the actual results, there is almost no difference between the two.

Other modifications with vixel include changes in texture types. I change the type of tRMET texture form float to uin8, that is one-fourth of original memory cost, and change the format and type of tRi texture from rgba-float to luminance-uint8 which is 1/16th of the original size.

The trade off for compress the texture size is to loss the precision of some value, such as emit and refract. And the rang of the these value will correspondingly different from the counter part in vixel.

fast-vixel screenshot

fast-vixel screenshot

fast-vixel screenshot

open the examples under the ./example folder to see the effect!

Example

const FastVixel = require('./build/FastVixel');
const canvas = document.createElement('canvas');

canvas.width = 512;
canvas.height = 512;
document.body.appendChild(canvas);

// the canvas is optional, regl will create a default full screen canvas if you don't pass it one.
const fvixel = new FastVixel({canvas:canvas, size:[64, 64, 64]});

// notice it is setCamera, and all 4 params are optional 
fvixel.setCamera({
    eye: [10, 10, 10], // Camera position
    center: [0.5, 0.5, 0.5], // Camera target
    up: [0, 1, 0], // Up
    fov: Math.PI / 4 // Field of view
});

fvixel.set( 1, 0, 0, {
    red: 1,
    green: 0.1,
    blue: 0.1,
});
fvixel.set( 0, 0, 1, {
    red: 1,
    green: 0.1,
    blue: 0.1,
});
fvixel.set(0, 0, 0, {
    red: 1,
    green: 0.5,
    blue: 0.25,
});

// you can take the regl object for other use
fvixel.regl.frame(() => {
    fvixel.sample(1);
    fvixel.display();
});
// you can also replace the `fvixel.regl.frame`
// with requestanimationframe like this:
/**
 * 
function render() {  
    fvixel.sample(1);
    fvixel.display();
    window.requestAnimationFrame(render); 
}
window.requestAnimationFrame(render);
 */

API

const FastVixel = require('fast-vixel')

Constructor

const fvixel = new FastVixel(opt:{canvas?, size:number[]|vec3} = {size:[32, 32, 32]});

similar to vixel's constructor, except the param is an object, the canvas is optional and the default world size is [32, 32, 32]

Method

Like vixel, methods marked with an (*) will reset the renderer. This will clear the collected samples and require new samples to converge the scene. Methods marked with (**) will reset both the renderer and require the voxel data to be reuploaded to the GPU on the next call to fvixel.sample. Reuploading can be slow depending on world size and the total amount of voxel.

fvixel.set(x, y, z, options)**

sets a voxel at coordinates x, y, z with options, similar to vixel.set(x, y, z, options), except some options' attributes have different range:

options
Option Type Default Description
red float 1.0 The red component of the voxel color.
green float 1.0 The green component of the voxel color.
blue float 1.0 The blue component of the voxel color.
rough Uint8 255 The roughness of the voxel surface. Zero is perfectly smooth, 255 is completely rough.
metal Uint8 0 The metalness of the voxel surface. Zero is completely nonmetallic, 255 is fully metallic.
transparent Uint8 0 The transparency of the voxel. Zero is completely opaque, 255 is completely clear.
refract Uint8 85 The refraction index of the voxel. This value will mapping from [0, 255] to [0, 3] in shader, so 85 will be convert to 1. And air has a value of 1.0 * 85 and glass is around 1.333 * 85 => 113. Although some materials have a refractive index greater than 3, common materials are basically within 3.
emit Uint8 0 The amount of light the voxel emits. If this is nonzero, rough, metal, transparent, and refract will be ignored. This value will mapping from [0, 255] to [0, 5], and the object that has emissive at 5 is actually very bright

These methods work the same as the conterpart in vixel.

fvixel.unset(x, y, z)**
fvixel.get(x, y, z)
fvixel.clear()**

fvixel.setCamera(param:{eye?:number[]|vec3, center?:number[]|vec3, up?:number[]|vec3, fov?:number});

similar to vixel.camera(eye, center, up, fov) except the param is an object and all 4 attributes are optional. see here

fvixel.setGround(param:{color?:number[]|vec3, rough?:number, metal?:number})*

similar to vixel.groung(color, rough, metal) except the param is an object and all 3 attributes are optional. see here

fvixel.getGround()

return an object contain all ground material.

type GroungAttribute = {
    color:vec3|number[],
    rough:number,
    metal:number,
};

setSun(param:{time?:number, azimuth?:number, radius?:number, intensity?:number})*

similar to vixel.groung(color, rough, metal) except the param is an object and all 4 attributes are optional. see here

fvixel.getSun()

return an object contain all ground material.

type SunAttribute = {
    time:number,
    azimuth:number,
    radius:number,
    intensity:number,
};

fvixel.dof(distance:number, magnitude:number)

same as vixel.dof. see here

fvixel.sample(count:number, totalCount:number=Infinity)

similar to vixel.sample(count:number), but add an optional prama totalCount, if the totalCount is an finity positive integer, fvixel will stop rendering when the render count reach totalCount. Once render state is been reset (such as call setCamera). fvixel will start render again.

fvixel.onProgressUpdate?:(progress:number) => void

you can assign the onProgressUpdate to an function which will receive the rendering progress as a parameter. progress' rang is [0, 1].

Thses methods work the same as vixel.

fvixel.display()

fvixel.serialize()

fvixel.deserialize(data)

fvixel.sampleCount