This project is a homebridge plugin for the Dyson air purifiers. Supported devices are:
- Dyson Pure Humidify+Cool (PH01)
- Dyson Pure Humidify+Cool Cryptomic (PH02)
- Dyson Pure Cool Tower (TP04)
- Dyson Pure Cool Tower Cryptomic (TP06)
- Dyson Pure Cool Desk (DP04)
- Dyson Pure Hot+Cool (HP04)
- Dyson Pure Hot+Cool Cryptomic (HP06)
- Dyson Pure Cool Link Tower (TP02)
- Dyson Pure Cool Link Desk (DP01)
- Dyson Pure Hot+Cool Link (HP02)
The device information is downloaded from your Dyson account. You just have to provide the IP addresses of the devices in the local network.
All your devices are exposed as air purifiers in HomeKit, with support (also in Apple Home app) for:
- On/off
- Auto/manual
- Fan speed
- Oscillation on/off
- Relative humidity
- Current temperature (in Apple Home app only supported as separate sensor)
- Air quality (incl. PM2.5, PM10, VOC and NO2 data for devices other than DP01, TP02 and HP02)
For heating devices, a thermostat is also exposes to HomeKit with support for:
- On/Off
- Target temperature
For humidifier devices, a humidifier is also exposes to HomeKit with support for:
- On/Off
- Auto/manual
- Target relative humidity
Optionally, the following switches are exposed:
- Night mode (on/off)
- Jet Focus (on/off; DP01, TP02 and HP02 are not supported)
- Continuous Monitoring (on/off)
The plugin is optimized for usage of the Home app in iOS 13, e.g. the night mode and jet focus switches are combined in a separate settings accessory. This can be changed in the config.
Option 1: Install the plugin via config-ui-x:
- Search for Dyson on config-ui-x plugin screen
- Click Install on homebridge Dyson Pure Cool plugin
- Once installed you will be prompted to set the config
- Restart homebridge service and plugin should be loaded with accessories
Option 2: Install the plugin via npm:
npm install homebridge-dyson-pure-cool -g{
"platforms": [
{
"platform": "DysonPureCoolPlatform",
"username": "<YOUR-EMAIL-ADDRESS>",
"password": "<YOUR-PASSWORD>",
"countryCode": "<COUNTRY-CODE>",
"devices": [
{
"ipAddress": "XXX.XXX.XXX.XXX",
"serialNumber": "XXX-EU-XXXXXXXX",
"credentials": null,
"enableAutoModeWhenActivating": false,
"enableOscillationWhenActivating": false,
"isNightModeEnabled": false,
"isJetFocusEnabled": false,
"isContinuousMonitoringEnabled": false,
"isTemperatureSensorEnabled": false,
"isHumiditySensorEnabled": false,
"isAirQualitySensorEnabled": false,
"isSingleAccessoryModeEnabled": false,
"isFullRangeHumidity": false,
"isHeatingDisabled": false
}
],
"updateInterval": 60000,
"retrySignInInterval": 0
}
]
}username: Your email address of the Dyson account you used to register the device with in the Dyson app.
password: Your password of the Dyson account you used to register the device with in the Dyson app.
countryCode: Two-letter ISO code of your country, e.g. US, DE, GB...
devices: Array of all your Dyson devices.
ipAddress: Local IP address of the device.
serialNumber: Serial number of the device.
credentials (optional): By default, the Dyson API is contacted to retrieve required information of the devices. However, you can also store credentials of each device in this property. If you do that for ALL of the devices, the Dyson API is no longer used, the connection can be directly established with the credentials. To retrieve the credentials, run the plugin without credentials. The credentials will then be printed out in the logs for each device.
enableAutoModeWhenActivating: If set to true, the Auto mode is enabled when you activate the device in the Home app. Defaults to false.
enableOscillationWhenActivating: If set to true, oscillation is enabled when you active the device. Defaults to false.
isNightModeEnabled: If set to true, a switch is exposed for the night mode. Defaults to false.
isJetFocusEnabled: If set to true, a switch is exposed for the jet focus. DP01, TP02 and HP02 are not supported. Defaults to false.
isContinuousMonitoringEnabled: If set to true, a switch is exposed for the continuous monitoring. Defaults to false.
isTemperatureSensorEnabled: If set to true, a separate temperature sensor is exposed. Only used for non-heating devices. If set to false, the temperature is added as characteristic to the air purifier (does not show up in the Apple Home app). Defaults to false.
isHumiditySensorEnabled: If set to true, a separate humidity sensor is exposed. Only used for non-humidifier devices. If set to false, the humidity is added as characteristic to the air purifier (supported in the Apple Home app). Defaults to false.
isAirQualitySensorEnabled: If set to true, a separate air quality sensor is exposed. If set to false, the air quality is added as characteristic to the air purifier (supported in the Apple Home app). Defaults to false.
isSingleSensorAccessoryModeEnabled: If set to true, all sensors are exposed to HomeKit in a single accessory instead of multiple accessories. Only has an effect if the previous settings for enabling sensors are set to true. Defaults to false.
isSingleAccessoryModeEnabled: If set to true, all services are exposed to HomeKit in a single accessory instead of multiple accessories. If set to true, the single sensor accessory mode has no effect. Use this mode if you are using a third-party HomeKit app and want all services grouped into a single accessory. Defaults to false.
isFullRangeHumidity: Only for PH01/PH02. If set to true, the range of the target humidity control will be from 0% to 100% instead of translating it to the allowed range (30% to 70%) of the Dyson. Defaults to false.
isHeatingDisabled: Only for HP02/HP04/HP06. If set to true, the heating controls are not exposed to HomeKit. Defaults to false.
updateInterval (optional): The interval (in milliseconds) at which updates of the sensors are requested from the Dyson devices. Defaults to 60 seconds.
retrySignInInterval (optional): The interval (in milliseconds) at which the plugin tries to communicate with the Dyson API at plugin startup. Set the value to 5000 (5 seconds) or more if you have internet connectivity issue. Defaults to 0, which means retry is disabled.