/p2pool-neoscrypt

Peer-to-peer mining pool for NeoScrypt coins

Primary LanguagePythonGNU General Public License v3.0GPL-3.0

Version of neoscrypt p2pool for feathercoind versions 0.16

Requirements

Generic:

  • Python >=2.6
  • Twisted >=10.0.0
  • python-argparse (for Python =2.6)

Linux:

  • sudo apt-get install python-zope.interface python-twisted python-twisted-web
  • sudo apt-get install python-argparse # if on Python 2.6

Windows:

Running P2Pool:

To use P2Pool, you must be running your own local coin daemon. For standard configurations, using P2Pool should be as simple as:

python run_p2pool.py

Then run your miner program, connecting to 127.0.0.1 on the default worker port with any username and password.

If you are behind a NAT, you should enable TCP port forwarding on your router. Forward port 9333 to the host running P2Pool.

Run for additional options.

python run_p2pool.py --help

Official wiki :

https://en.bitcoin.it/wiki/P2Pool

Alternate web front end :

Notes for Srcypt/NeoScrypt based coins:

Requirements:

In order to use P2Pool with any Scrypt/NeoScrypt powered coin, you need to build and install the Scrypt and/or NeoScrypt Python module first.

Linux:

cd neoscrypt  # for neoscrypt coins
cd litecoin_scrypt # for scrypt based coins
sudo python setup.py install

Windows (mingw):

In bash type this:

cd neoscrypt  # for neoscrypt coins
cd litecoin_scrypt # for scrypt based coins
C:\Python27\python.exe setup.py build --compile=mingw32 install

Windows (microsoft visual c++)

  • Open visual studio console

In bash type this:

SET VS90COMNTOOLS=%VS110COMNTOOLS%	           # For visual c++ 2012
SET VS90COMNTOOLS=%VS100COMNTOOLS%             # For visual c++ 2010

cd neoscrypt           # for neoscrypt coins
cd litecoin_scrypt     # for scrypt based coins

C:\Python27\python.exe setup.py build --compile=mingw32 install

If you run into an error with unrecognized command line option '-mno-cygwin', see this: http://stackoverflow.com/questions/6034390/compiling-with-cython-and-mingw-produces-gcc-error-unrecognized-command-line-o

Running P2Pool for Phoenixcoin:

Run P2Pool with the "--net phoenixcoin" option. Run your miner program, connecting to 127.0.0.1 on port 10554. Forward port 10555 on your router to any PXC nodes running P2Pool.

Running P2Pool for Feathercoin:

Run P2Pool with the "--net feathercoin" option. Run your miner program, connecting to 127.0.0.1 on port 19327. Forward port 19339 on your router to any FTC nodes running P2Pool.

Sponsors:

Thanks to:

  • The Bitcoin Foundation for its generous support of P2Pool
  • The Litecoin Project for its generous donations to P2Pool

License:

Available here