weltenwort/home-assistant-rct-power-integration

Issues

• Set entities to unavailable when data fetching fails repeatedly

  #360 opened a year ago by weltenwort
  0

• High and low SOC target not shown as configured

  #329 opened a year ago by MarcWeickenmeier
  1

• Battery calibration

  #264 opened a year ago by OrsagFra
  12

• More entitiys like from the RCT-Portal

  #313 opened a year ago by Sectorchan
  1

• Replace usage of deprecated device class constants

  #281 opened a year ago by weltenwort
  1

• Query battery status

  #21 opened a year ago by weltenwort
  0

• Add absolute value for rct_power_storage_grid_energy_production_year

  #347 opened a year ago by herrdaehn
  0

• time to update custom_components.rct_power.lib.entity.RctPowerSensorEntity

  #325 opened a year ago by Sectorchan
  2

• Felix kommt eine korregierte Version?

  #338 opened a year ago by knieshe1
  5

• deprecated constants prevent the integration from loading in new Home Assistant for RPI5

  #330 opened a year ago by kantokant
  1

• Not working in 2024.1.0

  #331 opened a year ago by 705Marc
  26

• Integrate into OpenHab

  #327 opened a year ago by juli-august
  1

• Unable to integrate to RCT Power using IP and Port

  #328 opened a year ago by TWLRawwwrr
  1

• Several RCT sensor values have state class "total_increasing", but their states are negative or not strictly increasing

  #258 opened 2 years ago by gutwinski
  2

• [Wh] counters at home assistant core 2023.9.1 not working

  #323 opened a year ago by christianmhuber
  3

• Always "Initalizing" & "Failed setup. will retry."

  #322 opened a year ago by andyrockt
  4

• Not shown in HACS

  #320 opened a year ago by andybali
  1

• No battery status after firmware upgrade

  #311 opened 2 years ago by robin13
  5

• Since early morning 12:th of June The absolute total values are not increasing.

  #315 opened 2 years ago by blueslow
  3

• Change Request for all negativ values into positives.

  #314 opened 2 years ago by Sectorchan
  0

• Link to documentation is incorrect

  #278 opened 2 years ago by mqatgit
  2

• Implausible values from Grid Energy Consumption Total

  #279 opened 2 years ago by rhoegen
  2

• Bug in Restore procedure

  #268 opened 2 years ago by wora55
  1

• Configuration

  #254 opened 2 years ago by scat703
  3

• Document installation steps with supervised HA

  #237 opened 2 years ago by brainboutique
  4

• RCT Power Portal is not showing correct data when integration is enabled

  #212 opened 2 years ago by martinwoit
  3

• Error when connection fails

  #228 opened 2 years ago by robin13
  3

• Unknown error occured when connecting Axpert MKS4

  #205 opened 3 years ago by Technaur
  2

• Integration not working with HA 2020-05-0

  #207 opened 3 years ago by k3mpaxl
  10

• Error message from recorder (type mismatch)

  #202 opened 3 years ago by wora55
  1

• Allow network frequency monitoring without island mode capabilities.

  #134 opened 3 years ago by k3mpaxl
  8

• Cannot be installed using HACS on HA 2021.11

  #161 opened 3 years ago by bagges
  3

• Energy broken on 2021.12

  #170 opened 3 years ago by pluskal
  10

• Recorder Issues after upgrading to 0.8.1 on HA 2021.11

  #151 opened 3 years ago by floriankrueger
  1

• Document the most important entities and their usage in the energy dashboard

  #128 opened 3 years ago by weltenwort
  0

• Support for the new "Energy HA integration"

  #91 opened 3 years ago by pluskal
  13

• Calculate the total energy produced by both PV generators

  #119 opened 3 years ago by weltenwort
  0

• Expose the battery's `used_energy` measurement as an entity

  #118 opened 3 years ago by weltenwort
  0

• Switch from `last_reset` to `total_increasing`

  #117 opened 3 years ago by weltenwort
  0

• Round Response Values

  #100 opened 3 years ago by k3mpaxl
  5

• Enable dependency caching in actions

  #15 opened 3 years ago by weltenwort
  0

• Query energy statistics

  #22 opened 4 years ago by weltenwort
  0

• Query power forecasts

  #23 opened 4 years ago by weltenwort
  0

• Decode fault registers

  #16 opened 4 years ago by weltenwort
  0

• Add pyright check to pre-commit

  #14 opened 4 years ago by weltenwort
  0