RLBench: Robot Learning Benchmark

RLBench is an ambitious large-scale benchmark and learning environment designed to facilitate research in a number of vision-guided manipulation research areas, including: reinforcement learning, imitation learning, multi-task learning, geometric computer vision, and in particular, few-shot learning. Click here for website and paper.

Contents:

Announcements
Install
Running Headless
Getting Started
Tasks
Task Building
Gotchas!
Contributing
Acknowledgements
Citation

Announcements

1 July, 2021

New instructions on headless GPU rendering here!

8 September, 2020

New tutorial series on task creation here!

1 April, 2020

We added a Discord channel to allow the RLBench community to help one another. Click the Discord badge above.

28 January, 2020

RLBench has been accepted to RA-L with presentation at ICRA!
Ability to easily swap out arms added. See here.

17 December, 2019

Gym is now supported!

Install

RLBench is built around PyRep and V-REP. First head to the PyRep github page and install.

If you previously had PyRep installed, you will need to update your installation!

Hopefully you have now installed PyRep and have run one of the PyRep examples. Now lets install RLBench:

pip install -r requirements.txt
pip install .

And that's it!

Running Headless

You can run RLBench headlessly with VirtualGL. VirtualGL is an open source toolkit that gives any Unix or Linux remote display software the ability to run OpenGL applications with full 3D hardware acceleration. First insure that you have the nVidia proprietary driver installed. I.e. you should get an output when running nvidia-smi. Now run the following commands:

sudo apt-get install xorg libxcb-randr0-dev libxrender-dev libxkbcommon-dev libxkbcommon-x11-0 libavcodec-dev libavformat-dev libswscale-dev
sudo nvidia-xconfig -a --use-display-device=None --virtual=1280x1024
# Install VirtualGL
wget https://sourceforge.net/projects/virtualgl/files/2.5.2/virtualgl_2.5.2_amd64.deb/download -O virtualgl_2.5.2_amd64.deb
sudo dpkg -i virtualgl*.deb
rm virtualgl*.deb

You will now need to reboot, and then start the X server:

sudo reboot
nohup sudo X &

Now we are good to go! To render the application with the first GPU, you can do the following:

export DISPLAY=:0.0
python my_pyrep_app.py

To render with the second GPU, you will insetad set display as: export DISPLAY=:0.1, and so on.

Acknowledgement: Special thanks to Boyuan Chen (UC Berkeley) for bringing VirtualGL to my attention!

Getting Started

The benchmark places particular emphasis on few-shot learning and meta learning due to breadth of tasks available, though it can be used in numerous ways. Before using RLBench, checkout the Gotchas section.

Few-Shot Learning and Meta Learning

We have created splits of tasks called 'Task Sets', which consist of a collection of X training tasks and 5 tests tasks. Here X can be 10, 25, 50, or 95. For example, to work on the task set with 10 training tasks, we import FS10_V1:

from rlbench.environment import Environment
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import FS10_V1
import numpy as np

action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode)
env.launch()

train_tasks = FS10_V1['train']
test_tasks = FS10_V1['test']
task_to_train = np.random.choice(train_tasks, 1)[0]
task = env.get_task(task_to_train)
task.sample_variation()  # random variation
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(size=env.action_size))

A full example can be seen in examples/few_shot_rl.py.

Reinforcement Learning

from rlbench.environment import Environment
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import ReachTarget
import numpy as np

action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode)
env.launch()

task = env.get_task(ReachTarget)
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(size=env.action_size))

A full example can be seen in examples/single_task_rl.py. If you would like to bootstrap from demonstrations, then take a look at examples/single_task_rl_with_demos.py.

Sim-to-Real

from rlbench import DomainRandomizationEnvironment
from rlbench import RandomizeEvery
from rlbench import VisualRandomizationConfig
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import OpenDoor
import numpy as np

# We will borrow some from the tests dir
rand_config = VisualRandomizationConfig(
    image_directory='../tests/unit/assets/textures')

action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = DomainRandomizationEnvironment(
    action_mode, randomize_every=RandomizeEvery.EPISODE, 
    frequency=1, visual_randomization_config=rand_config)

env.launch()

task = env.get_task(OpenDoor)
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(size=env.action_size))

A full example can be seen in examples/single_task_rl_domain_randomization.py.

Imitation Learning

from rlbench.environment import Environment
from rlbench.action_modes import ArmActionMode, ActionMode
from rlbench.tasks import ReachTarget
import numpy as np

# To use 'saved' demos, set the path below
DATASET = 'PATH/TO/YOUR/DATASET'

action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode, DATASET)
env.launch()

task = env.get_task(ReachTarget)

demos = task.get_demos(2)  # -> List[List[Observation]]
demos = np.array(demos).flatten()

batch = np.random.choice(demos, replace=False)
batch_images = [obs.left_shoulder_rgb for obs in batch]
predicted_actions = predict_action(batch_images)
ground_truth_actions = [obs.joint_velocities for obs in batch]
loss = behaviour_cloning_loss(ground_truth_actions, predicted_actions)

A full example can be seen in examples/imitation_learning.py.

Multi-Task Learning

We have created splits of tasks called 'Task Sets', which consist of a collection of X training tasks. Here X can be 15, 30, 55, or 100. For example, to work on the task set with 15 training tasks, we import MT15_V1:

from rlbench.environment import Environment
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import MT15_V1
import numpy as np

action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode)
env.launch()

train_tasks = MT15_V1['train']
task_to_train = np.random.choice(train_tasks, 1)[0]
task = env.get_task(task_to_train)
task.sample_variation()  # random variation
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(size=env.action_size))

A full example can be seen in examples/multi_task_learning.py.

RLBench Gym

RLBench is Gym compatible! Ensure you have gym installed (pip3 install gym).

Simply select your task of interest from rlbench/tasks/, and then load the task by using the task name (e.g. 'reach_target') followed by the observation mode: 'state' or 'vision'.

import gym
import rlbench.gym

env = gym.make('reach_target-state-v0')
# Alternatively, for vision:
# env = gym.make('reach_target-vision-v0')

training_steps = 120
episode_length = 40
for i in range(training_steps):
    if i % episode_length == 0:
        print('Reset Episode')
        obs = env.reset()
    obs, reward, terminate, _ = env.step(env.action_space.sample())
    env.render()  # Note: rendering increases step time.

print('Done')
env.close()

A full example can be seen in examples/rlbench_gym.py.

Swapping Arms

The default Franka Panda Arm can be swapped out for another. This can be useful for those who have custom tasks or want to perform sim-to-real experiments on the tasks. However, if you swap out the arm, then we can't guarantee that the task will be solvable. For example, the Mico arm has a very small workspace in comparison to the Franka.

For benchmarking, the arm should remain as the Franka Panda.

Currently supported arms:

Franka Panda arm with Franka gripper (franka)
Mico arm with Mico gripper (mico)
Jaco arm with 3-finger Jaco gripper (jaco)
Sawyer arm with Baxter gripper (sawyer)
UR5 arm with Robotiq 85 gripper (ur5)

You can then swap out the arm using robot_configuration:

env = Environment(action_mode=action_mode, robot_configuration='sawyer')

A full example (using the Sawyer) can be seen in examples/swap_arm.py.

Don't see the arm that you want to use? Your first step is to make sure it is in PyRep, and if not, then you can follow the instructions for importing new arm on the PyRep GitHub page. After that, feel free to open an issue and we can being it in to RLBench for you.

Tasks

To see a full list of all tasks, see here.

To see gifs of each of the tasks, see here.

Task Building

The task building tool is the interface for users who wish to create new tasks to be added to the RLBench task repository. Each task has 2 associated files: a V-REP model file (.ttm), which holds all of the scene information and demo waypoints, and a python (.py) file, which is responsible for wiring the scene objects to the RLBench backend, applying variations, defining success criteria, and adding other more complex task behaviours.

Video tutorial series here!

In-depth text tutorials:

Gotchas!

Using low-dimensional task observations (rather than images): RLBench was designed to be challenging, putting emphasis on vision rather than toy-based low dimensional inputs. Although each task does supply a low-dimensional output this should be used with extreme caution!
- Why? Imagine you are training a reinforcement learning agent to pick up a block; halfway through training, the block slips from the gripper and falls of the table. These low-dimensional values will now be out of distribution. I.e. RLBench does not safeguard against objects going out of the workspace. This issue does not arise when using image-based observations.
Using non-standard image size: RLBench by default uses image observation sizes of 128x128. When using an alternative size, be aware that you may need to collect your saved demonstrations again.
- Why? If we instead specify a 64x64 image observation size to the ObservationConfig then the scene cameras will now render to that size. However, the saved demos on disk will now be resized to be 64x64. This resizing will of course mean that small artifacts may be present in stored demos that may not be present in the 'live' observations from the scene. Instead, prefer to re-collect demos using the image observation sized you plan to use in the 'live' environment.

Contributing

New tasks using our task building tool, in addition to bug fixes, are very welcome! When building your task, please ensure that you run the task validator in the task building tool.

A full contribution guide is coming soon!

Acknowledgements

Models were supplied from turbosquid.com, cgtrader.com, free3d.com, thingiverse.com, and cadnav.com.

Citation

@article{james2019rlbench,
  title={RLBench: The Robot Learning Benchmark \& Learning Environment},
  author={James, Stephen and Ma, Zicong and Rovick Arrojo, David and Davison, Andrew J.},
  journal={IEEE Robotics and Automation Letters},
  year={2020}
}

wey-code/RLBench