wh201906/Proxmark3GUI

Issues

• windows 预加载脚本无效

  #63 opened 19 days ago by JackiMa
  1

• MACOS连接问题客户端路径无效

  #61 opened 4 months ago by 584146519
  2

• 老哥该更新了

  #62 opened 3 months ago by gfw404
  0

• Could not recognize the device (请求 USB 设备描述符失败)

  #60 opened 6 months ago by wocaishiniliu
  4

• win10下找不到dll文件

  #59 opened 7 months ago by wocaishiniliu
  12

• Not sure if this is the correct place..

  #58 opened 7 months ago by ApoIIy0n
  1

• 请问，验证默认密码的密码文件再什么位置改？

  #47 opened a year ago by happytimek002
  3

• 无法连接到PM3硬件

  #57 opened 10 months ago by i-liberty
  2

• Ubuntu 22.04 and Iceman Fork does not work

  #55 opened a year ago by setime
  3

• Connection on ubuntu 22.04 to device not working

  #53 opened a year ago by setime
  8

• 关于hardnested算nonces.bin

  #52 opened a year ago by jiajixin521
  5

• 冰人固件+HC-05蓝牙无法连接

  #51 opened a year ago by Otakukisaragishintaro
  22

• 关于 GUIsettings.ini 存放位置建议

  #50 opened a year ago by taotieren
  1

• Help

  #48 opened a year ago by sparespice
  11

• Failed to connect to the hardware

  #49 opened a year ago by maumau1969
  2

• please add Issues Translate Action

  #46 opened 2 years ago by berlin4apk
  1

• Pm3

  #44 opened 2 years ago by xyfld32
  1

• LF search uses "u" instead of "-u"

  #43 opened 2 years ago by NanashiTheNameless
  5

• 图形化软件没有支持一些新命令

  #38 opened 2 years ago by xbebhxx3
  11

• 更换路径后启动失败 | Failed to start the app if the path is not default

  #15 opened 4 years ago by phields
  3

• Client connects to PM3 for a second then disconnects

  #41 opened 2 years ago by danielbercu
  3

• MIFARE data display not updated or cleared | Mifare卡界面数据区无法被清空

  #28 opened 3 years ago by Kadalia
  20

• can not connect to pm3 | 应用程序无法正常启动

  #42 opened 2 years ago by PikuZheng
  5

• PM3 Error: QProcess::Crashed "Process crashed"

  #40 opened 2 years ago by alphafox02
  1

• PM3 Error: QProcess::FailedtoStart

  #39 opened 2 years ago by alphafox02
  1

• 能否支持最新版rrg客户端v4.15864

  #37 opened 2 years ago by xbebhxx3
  4

• 是否考虑支持写GTU卡？

  #34 opened 2 years ago by zxjsir-hub
  3

• 为什么刷了冰人固件用这个gui读不出卡信息了？

  #36 opened 2 years ago by Mabisi
  13

• 请求搞个macOS

  #31 opened 2 years ago by micoewhl
  7

• "Failed to Load config" on linux with the head of iceman proxmark3

  #30 opened 3 years ago by gbin
  3

• Raspberry Pi linux Debian 连接不上pm3 | Cannot connect to pm3 hardware on Raspberry Pi

  #22 opened 3 years ago by lkjopp
  14

• Not compatible with new Iceman/RRG repo | 新iceman客户端不再适用

  #24 opened 3 years ago by zzzz0317
  3

• Debian Make error | Debian 编译时报错

  #25 opened 3 years ago by lkjopp
  1

• Debian 连接不上 pm3 | Cannot connect to pm3 hardware on Debian

  #26 opened 3 years ago by lkjopp
  7

• Does the iCopy XS need to be flashed with firmware to connect? | iCopy XS 是不是要刷了固件才能连上？

  #29 opened 3 years ago by p0we7
  2

• request

  #23 opened 3 years ago by TQMatvey
  2

• Cannot save key file when using zh_CN | 使用中文界面时无法保存密钥文件

  #27 opened 3 years ago by wh201906
  0

• 保存的时候无法保存为dump文件 | Cannot save dump file

  #21 opened 3 years ago by lionzhou1981
  1

• 预加载脚本的绝对路径不能包含中文，否则无法执行 | Preload script path cannot contain non-ASCII characters

  #17 opened 4 years ago by nov12
  1

• Support v4.13441?

  #19 opened 3 years ago by iceman1001
  5

• no member named 'textChanged' in 'QSpinBox'

  #9 opened 4 years ago by jsxyhyj
  2

• Raspberry Pi zh_CN can not load Chinese.

  #20 opened 3 years ago by lkjopp
  1

• 一个问题

  #18 opened 3 years ago by Mudrobot
  2

• Cannot read sector data in Release V0.2-win-RRGclient.7z | V0.2-win-RRGclient.7z中无法读取扇区数据

  #16 opened 4 years ago by wh201906
  1

• unable to connect

  #7 opened 4 years ago by ruling
  2

• 业界良心Proxmark3GUI，鼎力支持

  #8 opened 4 years ago by 812630419
  1

• 大神你好 什么时候支持cuid卡 ufuid卡的读写呢

  #6 opened 4 years ago by everone11
  4