Issues
- 1
Source for Bitio.hex
#45 opened by RandoSY - 2
REPL: could not get a prompt
#44 opened by RadoTheProgrammer - 2
Timeout error
#43 opened by happy-jin1234 - 5
Support for analog reading of pins.
#42 opened by hegehog8761 - 3
- 1
Additional services required - including GPIO
#12 opened by whaleygeek - 1
Neopixels support
#38 opened by whaleygeek - 1
Neopixel support
#16 opened by whaleygeek - 6
- 1
V2 support
#31 opened by whaleygeek - 0
V2 sound sensor support
#36 opened by whaleygeek - 0
Light sensor support
#37 opened by whaleygeek - 0
PWM support on GPIO pins
#39 opened by whaleygeek - 3
Add unittest test suites
#35 opened by whaleygeek - 15
Reports of radio.send() not working
#34 opened by whaleygeek - 5
radio.receive_full()
#29 opened by stefan-scott - 3
- 0
Explore idea of accelerators
#32 opened by whaleygeek - 1
idomatic use of 'None'
#28 opened by whaleygeek - 0
Better parsing of concept of 'None'
#30 opened by whaleygeek - 5
radio support
#17 opened by whaleygeek - 1
magnetometer support
#19 opened by andysc - 6
Accelerometer not working
#25 opened by bcopy - 10
can't set serial port
#20 opened by titimoby - 1
- 2
Can't detect dual button press
#21 opened by jarvisteach - 6
Use with multiple simultaneous serial ports
#11 opened by whaleygeek - 1
better pyserial embed detection
#15 opened by whaleygeek - 11
- 0
databits should be bytesize
#13 opened by whaleygeek - 0
Better embed detection
#14 opened by DavidWhaleMEF - 5
Intermittent error on Raspberry Pi
#3 opened by martinohanlon - 4
Change "device" to "microbit"
#7 opened by martinohanlon - 1
ALL_ARROWS
#9 opened by whaleygeek - 4
ALL_CLOCKS
#8 opened by martinohanlon - 1
- 3
Does not run on windows
#5 opened by whaleygeek - 1
Have to reset Microbit after each 'run'
#2 opened by martinohanlon - 6
sense.py doesn't show accelerometer during execution but when disconnecting micro:bit
#1 opened by titimoby