MLua is a Lua language plugin for the MUMPS database. It provides the means to call Lua from within M. Here is more complete documentation of where this project is headed. MLua incorporates lua-yottadb (cf. YDB's Multi-Language Programmer's Guide) which operates in the other direction, letting Lua code access an M database.
Invoking a Lua command from M is easy:
$ ydb
YDB>do &mlua.lua("print('Hello World!')")
Hello world!
(Note: prior to YDB v1.35 you'll want to prefix your command with u $p
to flush YDB's '\n' to stdout before calling Lua)
Now let's access a YDB local. At the first print statement we'll intentionally create a Lua syntax error:
YDB>do &mlua.lua("ydb = require 'yottadb'")
YDB>set hello="Hello World!"
YDB>do &mlua.lua("return ydb.get('hello')")
Hello World!
YDB>do &mlua.lua("return ydb.get('hello')",.output) ; capture return value in `output`
YDB>w output
Hello World!
YDB>
Since all Lua code chunks are actually functions, you can also pass parameters and return values:
YDB>do &mlua.lua("print('params:',...) return 'Done'",.out,,1,2) w out
params: 1 2
Done
YDB>
For the sake of speed, it is also possible to pre-compile a function. If the string starts with '>', the rest of the string is taken as the name of a global function to invoke, rather than a string to compile:
YDB>do &mlua.lua("function add(a,b) return a+b end")
YDB>do &mlua.lua(">add",.out,,3,4) w out
7
Let's use Lua to calculate the height of your neighbour's oak trees based on the length of their shadow and the angle of the sun. First we enter the raw data into YDB, then run tree_height.lua
to fetch from YDB and calculate:
YDB>set ^oaks(1,"shadow")=10,^("angle")=30
YDB>set ^oaks(2,"shadow")=13,^("angle")=30
YDB>set ^oaks(3,"shadow")=15,^("angle")=45
YDB>zwrite ^oaks ;same as Lua command: ydb.dump('^oaks')
^oaks("1","angle")="30"
^oaks("1","shadow")="10"
^oaks("2","angle")="30"
^oaks("2","shadow")="13"
^oaks("3","angle")="45"
^oaks("3","shadow")="15"
YDB>do &mlua.lua("dofile 'tree_height.lua'") ;see file contents below
YDB>do &mlua.lua("calc_height( ydb.node('^oaks') )")
Oak 1 is 5.8m high
Oak 2 is 7.5m high
Oak 3 is 15.0m high
YDB>zwr ^oaks(,"height")
^oaks(1,"height")=5.7735026918963
^oaks(2,"height")=7.5055534994651
^oaks(3,"height")="15.0"
The function calc_height()
fetches data from YDB and calculates oak heights. It is defined in tree_height.lua
as follows:
function calc_height(oaks)
for oaktree, _value, index in pairs(oaks) do
height = oaktree.shadow.__ * math.tan( math.rad(oaktree.angle.__) )
print(string.format('Oak %s is %.1fm high', index, height))
oaktree.height.__ = height -- save back into YDB
end
end
Further documentation of Lua's API for YDB is documented in YDB's Multi-Language Programmer's Guide, including locks and transactions.
You will find that you need to do ydb = require 'yottadb'
every time your start YDB, so that Lua can access yottadb functions. There is a way to automate this whenever MLua first starts. Simply set your MLUA_INIT environment variable withexport MLUA_INIT="ydb=require'yottadb'"
Alternatively, if you want to run a whole file of Lua commands when MLua first starts, simply point it to a file using the @
symbol: (e.g. with export MLUA_INIT=@startup.lua
) and startup.lua
will run whenever &mlua creates a new lua_State. It works just like Lua's standard LUA_INIT, except operates when MLua starts instead of when Lua starts.
You may have noticed that invoking MLua to check for errors and capture output is slightly awkward and looks something like set error=$$mlua.lua("return 1",.output) if output=1 ...
or worse. Don't you wish you could simply do if $$lua("return 1") ...
?
Well, you can actually do that if you add the following M wrapper function into your M routine. It will automatically raise errors and return the output/error. Note that it handles up to 8 optional arguments, which matches the default limit specified in mlua.xc:
lua(lua,a1,a2,a3,a4,a5,a6,a7,a8)
new o,result
set result=$select($data(a1)=0:$&mlua.lua(lua,.o),$data(a2)=0:$&mlua.lua(lua,.o,,a1),$data(a3)=0:$&mlua.lua(lua,.o,,a1,a2),$data(a4)=0:$&mlua.lua(lua,.o,,a1,a2,a3),$data(a5)=0:$&mlua.lua(lua,.o,,a1,a2,a3,a4),$data(a6)=0:$&mlua.lua(lua,.o,,a1,a2,a3,a4,a5),$data(a7)=0:$&mlua.lua(lua,.o,,a1,a2,a3,a4,a5,a6),$data(a8)=0:$&mlua.lua(lua,.o,,a1,a2,a3,a4,a5,a6,a7),0=0:$&mlua.lua(lua,.o,,a1,a2,a3,a4,a5,a6,a7,a8))
if result write o set $ecode=",U1,MLua,"
quit:$quit o quit
There's obviously is a mild performance penalty, so don't use this if speed is paramount.
Here is the list of supplied functions, [optional parameters in square brackets]:
- mlua.lua(code[,.output][,luaState][,param1][,...])
- mlua.open([.output][,flags])
- mlua.close(luaState)
- mlua.version()
mlua.lua()
accepts a string of Lua code which it compiles and runs as a Lua 'chunk'. Note that Lua chunks are actually functions, so values may be returned and optional function parameters passed (param1, ...). For the sake of speed, it also possible to run a pre-compiled function by name. If the string starts with '>', the rest of the string is taken as the name of a global function to invoke, rather than a string to compile, as in '>math.abs'
.
Be aware that all parameters are strings and are not automatically converted to Lua numbers. Parameters are currently limited to 8, but this may easily be increased in mlua.xc.
On success, mlua.lua()
sends the returned string to stdout or fills .output (if >1 parameters are supplied). If the return value is not a string, it is converted to a string as follows:
- nil ==> "" (empty string)
- boolean ==> "0" or "1"
- number ==> decimal string representation. Numbers >= 1e14 are coded as "1E+14": use M's unary + in front of them to force numeric interpretation
- string ==> a string which may contain NUL characters. It is truncated at 1048576 characters, the maximum YDB string length. This makes YDB allocate the whole 1MB for return data, but it's worth it since returning strings this way is faster than using
ydb.set()
. - other types ==> "(typename)"
If the luaState handle is missing or 0, mlua.lua() will run the code in the default global lua_State, automatically opening it the first time you call mlua.lua(). Alternatively, you can supply a luaState with a handle returned by mlua.open() (see below) to run code in a different lua_State.
On error, mlua.lua()
returns nonzero and the error message is sent to stdout or returned in .output (if >1 parameter supplied). Note that the error value return is currently equal to -1. This may be enhanced in the future to also return positive integers equal to ERRNO or YDB errors whenever YDB functions called by Lua are the cause of the error. However, for now, all errors return -1 and any YDB error code is encoded into the error message just like any other Lua error (Lua 5.4 does not yet support coded or named errors).
mlua.open()
creates a new 'lua_State' which contains a new Lua context, stack, and global variables, and can run independently and in parallel with other lua_States (see the Lua Reference Manual on the Application Programmer Interface). You may add optional flags defined in mlua.h: MLUA_IGNORE_INIT (=0x01) to suppress running of MLUA_INIT when the lua_State is opened, and MLUA_ALLOW_SIGNALS (see below).
On success, mlua.open()
returns a luaState handle which can be passed to mlua.lua(). On error, it returns zero and the error message is sent to stdout or returned in .output if supplied.
mlua.close()
can be called if you have finished using the lua_State, in order to free up any memory that a lua_State has allocated, first calling any garbage-collection meta-methods you have introduced in Lua.
mlua.close(0)
will close the default Lua state, and
mlua.close()
will close all Lua states.
It returns 0 on success, -1 if the supplied handle is invalid, and -2 if the supplied handle is already closed.
mlua.version()
returns the current MLua version number as decimal XXYYZZ where XX=major, YY=minor, ZZ=release
MLua requires YDB 1.34 or higher and Lua 5.1 or higher.
MLua's primary author is Berwyn Hoyt. MLua incorporates lua-yottadb by Mitchell, which is based heavily on YDBPython. Both were sponsored by, and are copyright © 2022, University of Antwerp Library. They are provided under the same license as YottaDB: the GNU Affero General Public License version 3.
MLua also uses Lua (copyright © 1994–2021 Lua.org, PUC-Rio) and YottaDB (copyright © 2017-2019, YottaDB LLC). Both are available under open source licenses.
Prerequisites: linux, gcc, yottadb Install YottaDB per the Quick Start guide instructions or from source.
To install MLua itself:
git clone `<mlua repository>` mlua
cd mlua && make
sudo make install # install MLua
Here's what is going on in the installation above:
- Line 1
git clone
fetches the MLua code. - Line 2
make
downloads and then builds the Lua language, then it builds MLua. - Line 3
make install
copies mlua.xc and mlua.so, typically into $ydb_dist/plugin, and _yottadb.so and yottadb.lua into the system lua folders.
If you also want to install the Lua version you just built into your system, do:
sudo make install-lua
You may also need to double-check that /usr/local/bin is in your path and/or run hash lua
to refresh bash's cached PATH so it can find the new /usr/local/bin/lua.
If you need to use a different Lua version or install into a non-standard YDB directory, change the last line to something like:
make install LUA_BUILD=5.x.x YDB_DEST=<your_ydb_plugin_directory> PREFIX=~/.local
MLua is implemented as a shared library mlua.so which also embeds Lua and the Lua library. There is no need to install Lua separately.
Instead of installing to the system, you can also install files into a local directory deploy
with make install local
.
Check that everything is in the right place:
$ ls -1 `pkg-config --variable=prefix yottadb`/plugin/mlua.*
/usr/local/lib/yottadb/r134/plugin/mlua.so
/usr/local/lib/yottadb/r134/plugin/mlua.xc
$ ls -1 /usr/local/share/lua/*/yottadb.* /usr/local/lib/lua/*/_yottadb.*
/usr/local/lib/lua/5.4/_yottadb.so
/usr/local/share/lua/5.4/yottadb.lua
The ydb_env_set script provided by YDB, automatically provides the environment variables needed for YDB to access any plugin installed in the plugin directory shown here. For old releases of the database you may need to provide ydb_xc_mlua environment variable explicitly.
To update both MLua and lua-yottadb from the internet and build+install:
make update
make install
To test MLua, simply type:
make test
To perform a set of speed tests, do:
make benchmark
Some benchmarks are installed by the Makefile. Others will require manual installation of certain Lua modules: for example luarocks install hmac
to get a SHA library for lua. But running make benchmarks
will note these requirements for you. There is further comment on these benchmarks in the benchmarks/README.md.
To release a new version of MLua:
- Test it first.
- Update the version number in
mlua.h
and the version history that precedes it. - To create a version tag in git and create a LuaRock, run:
make release
Lua co-routines, are perfectly safe to use with YDB, since they are cooperative rather than preemptive. However, MLua does not currently support multi-threaded applications – which would require these lua-yottadb changes.
Your MLua code must treat signals with respect. If your Lua code doesn't use slow or blocking IO like user input or pipes then you should have nothing to worry about. But if you're getting Interrupted system call
(EINTR) errors from Lua, then you need to read this section.
YDB uses signals heavily (especially SIGALRM: see below). This means that YDB signal/timer handlers may be called while running Lua code. Normally this doesn't matter, but if your Lua code is doing blocking IO operations (using read/write/open/close), then these operations may return the EINTR error. Lua C code itself is not written to retry this error condition, so your software will fail unnecessarily unless you handle them. If you really do wish to handle EINTR errors yourself, you should also call YDB API function ydb_eintr_handler() whenever you get an EINTR error.
MLua offers a mechanism to resolve this automatically by blocking YDB signals until your Lua function is finished. To use it, simply open your lua_State using mlua_open()
with the MLUA_BLOCK_SIGNALS
flag (0x04). Be aware that if you use signal blocking with long-running Lua code, the database will not run timers until your Lua code returns (though it can flush database buffers: see the note on SIGALRM below). Be aware that setting up signal blocking is slow, so using MLUA_BLOCK_SIGNALS
will more than double the mlua.lua() calling overhead (adding about 1.4 microseconds, compared to 0.9 microseconds when running a pre-compiled function like >math.abs
without blocking – see make benchmarks
).
For further details, refer to lua-yottadb notes on specific signals, which also apply to MLua.
Be aware that since different versions of Lua act differently, MLua will also act differently. This produces quirks like the following:
-
Number parameters are passed as strings, and returned as strings using Lua's number conversion, e.g.:
YDB>do &mlua.lua("function add(a,b) return a+b end") YDB>do &mlua.lua(">add",.out,,3,4) w out 7
This outputs "7" for all Lua versions except Lua 5.3, which returns "7.0". This is because all numbers are passed as strings, and Lua < 5.4 converts strings to floats but Lua < 5.3 prints floats without the
.0
if possible, whereas Lua 5.3 prints floats with the.0
And Lua >5.3 (e.g. 5.4) recognises strings '3' and '4' as integers, not floats: so its sum produces an integer as string "7".
-
Why can't it find <libyottadb.h>?
Make sure you have the prerequisites installed, including the yottadb package.
-
Why do I get error:
ydb_xc_mlua/GTMXC_mlua not set
?This is an environment variable that is supposed to be set by
ydb_env_set
which is a script that is normally run when you typeydb
. On my machine,ydb
runs a bash script at /usr/local/lib/yottadb/r134/ydb which, in turn, sourcesydb_env_set
. That script is responsible to set the ydb_xc_mlua environment variables required for every YDB plugin in the YDB plugin directory. On my machine, for example, it sets:ydb_xc_mlua=/usr/local/lib/yottadb/r134/plugin/mlua.xc
The fact that this is not being set for you may mean you're not running
ydb
the normal way. Perhaps you are runningyottadb
instead, without theydb
wrapper script. In that case you will need to create theydb_xc_mlua
environment variable yourself, to point to your mlua.xc file. -
When I
require 'yottadb'
why do I geterror loading module '_yottadb' from file '**/_yottadb.so':
?TLDR: Try to re-run MLua's
make install
This will fix the problem if your
mlua.so
and_yottadb.so
were built against different Lua versions. This sometimes happens if you build and install lua-yottadb separately from MLua. You can test which Lua version mlua.so expects, and compare the search path for _yottadb.so, by running:$ ydb YDB>do &mlua.lua("return _VERSION") Lua 5.2 YDB>do &mlua.lua("return package.cpath") <shows search path for _yottadb.so>
Now test where Lua is trying to find your
_yottadb.so
by runningdo &mlua.lua("print(package.cpath)")
(cf. environment variable LUA_CPATH). Note that these two files are typically located at:- /usr/local/lib/yottadb/r1??/plugin
- /usr/local/lib/lua/5.?/_yottadb.so