Pinned Repositories
ADU218
A simple GUI interface that can send commands to an OnTrak Control Systems ADU218
ATTiny10IDE
A Streamlined IDE for Coding and Programming the ATtiny10 and other ATTiny Devices
DebugWireDebuggerProgrammer
An Arduino Sketch that can control and debug other AVR MCU's using the debugWire Protocol
DXFReader
This code implements a simple DXF file parser that can read many 2D DXF files containing ARC, LINE, POLYLINE, LWPOLYLINE and SPLINE outlines such as those used for embroidery patterns and input to machines like Silhouette paper cutters.
GerberPlot
This code began as rewrite of the "Plotter" portion of Philipp Knirsch's "Gerber RS-274D/X file viewer in Java" (see: http://www.wizards.de/phil/java/rs274x.html) but, the current code has been extensively rewritten and expanded to use Java's Shape-based graphics and fix numerous small issues I found with the original code
LaserCut
LaserCut is an experimental, "Swiss Army Knife" type of program for creating 2D designs. It can combine primitive shapes using constructive geometry and then send them to a laser cutter for vector cutting or vector engraving
MegaTinyIDE
MegaTinyIDE is a Java & GNU-based IDE for the new MegaTiny chips (tinyAVR® 1-series and 0-series), such as the ATtiny212, attiny3217, etc.
RglComm
GUI-based program written in the Java Language that I created to experiment with communicating with and controlling Rigol™ devices using IEEE 488 Commands sent over the instrument's USB interface
TeensyCNC2
My version of TeensyCNC (originally created my Matt Williams) optimized for LaserCut
TimecodeReader
TimecodeReader can read an audio input signal using either a microphone, or line-level input and decode SMPTE/EBU Timecode in real time.
wholder's Repositories
wholder/ATTiny10IDE
A Streamlined IDE for Coding and Programming the ATtiny10 and other ATTiny Devices
wholder/DebugWireDebuggerProgrammer
An Arduino Sketch that can control and debug other AVR MCU's using the debugWire Protocol
wholder/LaserCut
LaserCut is an experimental, "Swiss Army Knife" type of program for creating 2D designs. It can combine primitive shapes using constructive geometry and then send them to a laser cutter for vector cutting or vector engraving
wholder/RglComm
GUI-based program written in the Java Language that I created to experiment with communicating with and controlling Rigol™ devices using IEEE 488 Commands sent over the instrument's USB interface
wholder/DXFReader
This code implements a simple DXF file parser that can read many 2D DXF files containing ARC, LINE, POLYLINE, LWPOLYLINE and SPLINE outlines such as those used for embroidery patterns and input to machines like Silhouette paper cutters.
wholder/MegaTinyIDE
MegaTinyIDE is a Java & GNU-based IDE for the new MegaTiny chips (tinyAVR® 1-series and 0-series), such as the ATtiny212, attiny3217, etc.
wholder/TeensyCNC2
My version of TeensyCNC (originally created my Matt Williams) optimized for LaserCut
wholder/GerberPlot
This code began as rewrite of the "Plotter" portion of Philipp Knirsch's "Gerber RS-274D/X file viewer in Java" (see: http://www.wizards.de/phil/java/rs274x.html) but, the current code has been extensively rewritten and expanded to use Java's Shape-based graphics and fix numerous small issues I found with the original code
wholder/TimecodeReader
TimecodeReader can read an audio input signal using either a microphone, or line-level input and decode SMPTE/EBU Timecode in real time.
wholder/ADU218
A simple GUI interface that can send commands to an OnTrak Control Systems ADU218
wholder/CardScan62
CardScan62 is an experimental, Java Language-based program I created to connect to and control a Dymo™ CardScan™ 62 Business Card Scanner.
wholder/ColossalCave
ColossalCave is my rewrite of a Unix C version of the classic text adventure game by Jerry D. Pohl that was based on a BDS C version by Jay R. Jaegar
wholder/SilhouetteTest
SilhouetteTest is an experimental, Java Language-based program I created to learn how to use the Usb4Java library to connect to and control a Silhouette Curio™
wholder/Cheetah3DParser
Cheetah3DParser is experimental code I created that's designed to read Cheetah3D's `.jas` files and dump the contents out in a human-readable form
wholder/CppSyntaxPane
CppSyntaxPane is a stripped down version of JSyntaxPane that only supports the syntax of the C++ programming language.
wholder/dungeon_master2
wholder/FScript
FScript provides a simple GUI interface for editing and running FScript code using a Java-based intepreter
wholder/GPSTileMap
Mapping and Mission Planning Code for Small Autonomous Ground Vehicles
wholder/HersheyView
This code is Java program that can render and display the Hershey Vector fonts developed c. 1967 by Dr. Allen Vincent Hershey at the Naval Weapons Laboratory.
wholder/JavaFxDynamicTexture3D
JavaFxDynamicTexture3D demonsrtates how to dynamically create an animated, transparent texture in JavaFx and then use it to texture the surface of cube.
wholder/JSONtoMap
JSONtoMap is a greatly scaled-down JSON parser and companion expander that works with a subset of the JSON spec and returns a nested structure of Maps and Lists that contain only String keys and values.
wholder/KinematicsTests
This is a simple, 2D, 2 Bone Inverse Kinematics demo
wholder/LaserBeeUSB
LaserBeeUSB provides a simple GUI interface for reading current and peak power levels from a LaserBee™ USB Power Meter.
wholder/MarkupView
MarkupView is a simple Viewer for Markdown Contenting written in Java
wholder/marytts
MARY TTS -- an open-source, multilingual text-to-speech synthesis system written in pure java
wholder/NumberPronunciation
This code is a partial replacement for the com.ibm.icu.text.RuleBasedNumberFormat package in the ICU4J library
wholder/ScriptNg
wholder/SplineDraw
SplineDraw is a test program I wrote to explore converting Catmull-Rom splines to Bezier curves
wholder/StitchView
StitchView allows you to view the designs in several types of embroidery files
wholder/USB4000