LicheeDan_K210_examples
Use the Kendryte K210 standalone SDK commitid d13b38098a3598b0018c38590387e43953efd140
and should use gcc-8.2. This can be download at https://kendryte.com/downloads/]
Kendryte official standalone sdk demo
You can find the official standalone sdk demo at https://github.com/kendryte/kendryte-standalone-demo.git
It has not been tested on Sipeed board. so you must test it by yourself.
Demo instruction
The following demos have been tested:
hello_world -- uart output hello_world
lcd -- lcd display
dvp_ov -- dvp output to lcd
gpiohs_led -- press key boot change led blue
ai_dmeo_sim -- k210 ai demo sim
lvgl -- lvgl demo on maix go
mic_play -- mic record, speak play
wav_test -- test wav decode, speak play
kpu_conv -- kpu demo
dace_detect_kmodel_flash -- load kmodel from flash
Kendryte K210 standalone SDK
This SDK is for Kendryte K210 without OS support. If you have any questions, please be free to contact us.
Usage
If you want to start a new project, for instance, hello_world, you only need to:
mkdir your project in src/, cd src && mkdir hello_world, then put your codes in it, and build it.
mkdir build && cd build
cmake .. -DPROJ=<ProjectName> -DTOOLCHAIN=/opt/riscv-toolchain/bin && makeYou will get 2 key files, hello_world and hello_world.bin.
- If you are using JLink to run or debug your program, use
hello_world - If you want to flash it in UOG, using
hello_world.bin, then using flash-tool(s) burn .bin to your flash.
This is very important, don't make a mistake in files.