/cgofuse

Cross-platform FUSE library for Go - Works on Windows, macOS, Linux, FreeBSD, NetBSD, OpenBSD

Primary LanguageGoMIT LicenseMIT

Cross-platform FUSE library for Go

Cgofuse is a cross-platform FUSE library for Go. It is supported on multiple platforms and can be ported to any platform that has a FUSE implementation. It has cgo and !cgo ("nocgo") variants depending on the platform.

Windows
 macOS
 Linux
 FreeBSD
no CI		 NetBSD*
no CI		 OpenBSD*
no CI
cgo ✓ ✓ ✓ ✓ ✓ ✓
!cgo ✓

* NetBSD and OpenBSD support is experimental. There are known issues that stem from the differences in the NetBSD librefuse and OpenBSD libfuse implementations from the reference libfuse implementation

How to build

Windows cgo

  • Prerequisites: WinFsp, gcc (e.g. from Mingw-builds)
  • Build: 
    > cd cgofuse
> set CPATH=C:\Program Files (x86)\WinFsp\inc\fuse
> go install -v ./fuse ./examples/memfs

Windows !cgo

  • Prerequisites: WinFsp
  • Build: 
    > cd cgofuse
> set CGO_ENABLED=0
> go install -v ./fuse ./examples/memfs

macOS

Linux

  • Prerequisites: libfuse-dev, gcc
  • Build: 
    $ cd cgofuse
$ go install -v ./fuse ./examples/memfs ./examples/passthrough

FreeBSD

  • Prerequisites: fusefs-libs
  • Build: 
    $ cd cgofuse
$ go install -v ./fuse ./examples/memfs ./examples/passthrough

# You may also need the following in order to run FUSE file systems.
# Commands must be run as root.
$ vi /boot/loader.conf                      # add: fuse_load="YES"
$ sysctl vfs.usermount=1                    # allow user mounts
$ pw usermod USERNAME -G operator           # allow user to open /dev/fuse

NetBSD

  • Prerequisites: NONE
  • Build: 
    $ cd cgofuse
$ go install -v ./fuse ./examples/memfs ./examples/passthrough

# You may also need the following in order to run FUSE file systems.
# Commands must be run as root.
$ chmod go+rw /dev/puffs
$ sysctl -w vfs.generic.usermount=1

OpenBSD

  • Prerequisites: NONE
  • Build: 
    $ cd cgofuse
$ go install -v ./fuse ./examples/memfs ./examples/passthrough
  • NOTE: OpenBSD 6 removed the kern.usermount option, which allowed non-root users to mount file systems [link]. Therefore you must be root in order to use FUSE and cgofuse.

How to use

User mode file systems are expected to implement fuse.FileSystemInterface. To make implementation simpler a file system can embed ("inherit") a fuse.FileSystemBase which provides default implementations for all operations. To mount a file system one must instantiate a fuse.FileSystemHost using fuse.NewFileSystemHost.

The full documentation is available at GoDoc.org: package fuse

There are currently three example file systems:

  • Hellofs is an extremely simple file system. Runs on all OS'es.
  • Memfs is an in memory file system. Runs on all OS'es.
  • Passthrough is a file system that passes all operations to the underlying file system. Runs on all OS'es except Windows.
  • Notifyfs is a file system that can issue file change notifications. Runs on Windows only.

How it is tested

The following software is being used to test cgofuse.

Windows (cgo and !cgo)

macOS

Linux

FreeBSD

Contributors

  • Bill Zissimopoulos <billziss at navimatics.com>
  • Nick Craig-Wood <nick at craig-wood.com>
  • Fredrik Medley <fredrik.medley at veoneer.com>