wokwi/rp2040js

Issues

• How to read from serial

  #140 opened 4 months ago by ArduinoManager
  1

• Support for newer CircuitPython firmwares

  #139 opened 5 months ago by rgov
  4

• Create CircuitPython storage disk on macOS

  #138 opened 5 months ago by rgov
  1

• How to do serial over USB with `demo/emulator-run.ts`?

  #133 opened a year ago by pguyot
  1

• RPi Pico Error `WARN: starting new transfer on already active ep 0 out`

  #122 opened 7 months ago by aaronjamt
  6

• Build README.md buidl/run steps do not work with Node 20:10

  #136 opened 8 months ago by NewWheelTech
  2

• SSD1306 broken on micropython 1.20+

  #135 opened 8 months ago by treysis
  6

• Is there a way to emulate cyw43 using nodejs?

  #134 opened 9 months ago by pguyot
  1

• ILI9341 freeze with adafruit_ili9341 lib

  #98 opened 10 months ago by danilinao
  5

• Is there a BUG in the RX function of UART in Pico?

  #128 opened a year ago by TBWXY777
  7

• How to simulate DHT22 and use it with RP2040 to read temperature and humidity?

  #127 opened a year ago by TBWXY777
  3

• PIO FIFO Joining

  #72 opened 3 years ago by urish
  1

• How to simulate signal for PIO?

  #106 opened 2 years ago by mingpepe
  8

• Allow specific image file.

  #114 opened a year ago by BrianPugh
  5

• UART write never blocks and doesn't actually write to GPIO pins

  #115 opened a year ago by c1570
  0

• Core1 support

  #109 opened 2 years ago by mingpepe
  6

• SPI burst read/write

  #105 opened 2 years ago by mingpepe
  8

• MicroPython time.time() value is wrong

  #77 opened 2 years ago by pyTony
  4

• Micropython `machine.freq()` returns the wrong value

  #67 opened 2 years ago by urish
  0

• CDC Issues with MicroPython 1.19.1 on 0.17.0

  #101 opened 2 years ago by jmdevy
  3

• How to calculate duty cycle of gpio-pin output value?

  #100 opened 2 years ago by BFjacky
  1

• How to simulate esp32?

  #99 opened 2 years ago by BFjacky
  5

• Implement the RP2040 PWM Peripheral

  #84 opened 2 years ago by urish
  0

• Pico fails silently when initialising SD Card

  #93 opened 2 years ago by craigdrayton
  8

• Problem when initialising Timer

  #95 opened 2 years ago by tmsch13
  1

• ICSR (Interrupt Control and State Register) register is missing

  #94 opened 2 years ago by kartben
  1

• Invalid "type" in esm/package.json

  #89 opened 3 years ago by a2
  2

• MicroPython: Filesystem will not mount

  #88 opened 3 years ago by jmdevy
  15

• PIO `jmp pin` branch is always taken

  #86 opened 3 years ago by martin2250
  3

• PIO `mov x, pins` input mask not applied

  #85 opened 3 years ago by martin2250
  16

• MicroPython i2c `writeto()` fails for unknown reason

  #83 opened 3 years ago by jmdevy
  1

• Using 'import' in MicroPython in the browser

  #81 opened 3 years ago by jmdevy
  7

• Toggling pins from JavaScript

  #82 opened 3 years ago by jmdevy
  2

• Uncaught RangeError: Offset is outside the bounds of the DataView (in browser)

  #80 opened 3 years ago by jmdevy
  3

• Latest stable MicroPython (20210902) does not provide REPL at startup

  #79 opened 3 years ago by jmdevy
  7

• DMA Support

  #78 opened 3 years ago by urish
  1

• Refactor: separate NVIC and SysTick

  #75 opened 3 years ago by urish
  0

• USB Serial not working on Arduino Core

  #76 opened 3 years ago by urish
  0

• USB Peripheral

  #66 opened 3 years ago by urish
  1

• PIO doesn't support Atomic Register Access

  #74 opened 3 years ago by urish
  0

• PIO doesn't raise TXNFULL/RXNEMPTY interrupts

  #73 opened 3 years ago by urish
  0

• PIO (Programmable I/O)

  #61 opened 3 years ago by urish
  1

• PIO `SIDE_PINDIR` and `SIDE_EN` read from the wrong register

  #71 opened 3 years ago by urish
  0

• PIO `mov invert` can result in a negative value

  #70 opened 3 years ago by urish
  0

• IRQ flags not set in the PIO INTR register

  #69 opened 3 years ago by urish
  0

• LSLS wrong result and flags when shift >=32

  #62 opened 3 years ago by Turro75
  3

• RSBS - SBCS wrong flags

  #58 opened 3 years ago by Turro75
  0

• again SUBS wrong flags

  #56 opened 3 years ago by Turro75
  1

• Missing `breakRewind` in BKPT

  #55 opened 3 years ago by urish
  0

• ADCS wrong overflow flag

  #50 opened 3 years ago by Turro75
  0